|
|
Symptom: PASSENGER OFF INDICATOR CIRCUIT SHORT TO BATTERY When Monitored and Set Condition: PASSENGER OFF INDICATOR CIRCUIT SHORT TO BATTERY When Monitored: When the ignition is on, the ACM monitors the PAB Indicator Driver circuit for voltage from the PAB Off indicator circuit. Set Condition: The code will set if the ACM senses battery voltage on the PAB Indicator Driver circuit. POSSIBLE CAUSES CHECKING EQUIPMENT PAB ON - OFF SWITCH INDICATOR SHORT PASSENGER AIRBAG INDICATOR SHORT TO FUSED RUN - START CIRCUIT PASSENGER AIRBAG INDICATOR DRIVER CIRCUIT SHORTED TO BATTERY ACM, PAB INDICATOR DRIVER CIRCUIT SHORT TO BATTERY STORED CODE OR INTERMITTENT CONDITION ACTIVE CODE PRESENT TEST ACTION APPLICABILITY 1 Turn the ignition on. All ACM - ACTIVE DTC Go To 2 ACM - STORED DTC Go To 7 NOTE: When reconnecting Airbag system components, the ignition must be 2 Is this vehicle equipped with a Passenger Airbag On - Off Switch? All Yes → Go To 3 No → With the DRBIIIt in MISCELLANEOUS, read the Configure for Airbag ON - OFF Switch current status. Enter the number 1 and 121 AIRBAG |