|
|
TEST ACTION APPLICABILITY 9 Turn the ignition off. t from the DLC. Measure the resistance of the SCI Transmit circuit between the PCM C3 connector All Yes → No → Repair the SCI Transmit circuit for an open. 10 Turn the ignition off. t from the DLC. Disconnect the negative battery cable. All Yes → No → Repair the ground circuit that measured above 5.0 ohms for an 11 If there are no possible causes remaining, view repair. All Repair Replace and program the Powertrain Control Module in accor- 44 COMMUNICATION *NO RESPONSE FROM PCM (SCI ONLY) — Continued |