|
|
© 200505 4-1 Removing and installing CE ENGINE LUBRICATION SYSTEM ΛΦ45/55 series 2 7 4. REMOVING AND INSTALLING 4.1 REMOVAL AND INSTALLATION, LUBRICATING OIL FILTER To prevent skin injury, avoid unnecessary contact with the drained lubricating oil. Be careful when changing the oil. Hot oil may cause serious injuries. Removing the oil filter Clean the location and the area surrounding the filter element if extremely fouled. 2. Remove the filter element by turning it anti- clockwise. Collect any oil that is flowing out. 3. Remove the O-ring if it has not been removed already. Installing the oil filter Lightly oil the filter element sealing ring. 2. Fill the filter element with clean oil. Use the specified oil. 3. Fit the filter until the seal abuts, and tighten it by hand another • to a full turn. 4. Run the engine for a short time and check whether the oil filter is correctly sealed. 5. Check the oil level and correct if necessary. Use the specified oil. } G0 00 207 |