DAF 95XF. Manual - part 159

 

  Index      DAF     DAF 95XF Series - service repair manual

 

Search            

 

 

 

 

 

 

 

  

 

Content   ..  157  158  159  160   ..

 

 

DAF 95XF. Manual - part 159

 

 

©

 200438

1-9

EBS fault codes

EBS

DAVIE XD diagnostics manual 

1

41-69

No CAN message "TCO1" received within a 
specified period of time from the tachograph in 
relation to the vehicle speed due to:
-

communication problem with the tachograph 
(MTCO)

-

K-factor in MTCO incorrect or not there

-

delayed loss of supply voltage on EBS unit 
when switching off ignition (this is a common 
production situation but it has been solved in 
subsequent production versions by the 
addition of relay G426)

-

No noticeable system limitation in EBS

41-71

No CAN message received from VIC within a 
specified period of time

-

No noticeable system limitation in EBS

42-16

EBS unit does not receive correct CAN message 
from the rear axle modulator (D879) on pins B1 
and B4 of the EBS unit

-

ABS on front and rear axles deactivated

-

ASR brake/engine control deactivated

-

EBS pressure control on front axle, rear axle 
and drawn vehicle deactivated

42-61

Interrupted CAN communication with the rear 
axle modulator (D879) via pins B1 and B4 of the 
EBS unit due to:
-

short circuit to earth on pin B4 of the EBS 
unit

-

short circuit to supply on pin B1 and/or pin 
B4 of the EBS unit

-

short circuit between pin B1 and pin B4 of 
the EBS unit

-

ABS on front and rear axles deactivated

-

ASR brake/engine control deactivated

-

EBS pressure control on rear axle 
deactivated

43-61

CAN communication problem with the drawn 
vehicle ECU via pins B3 and B6 of the EBS unit

-

No noticeable system limitation in EBS

43-63

Interrupted CAN communication, with a driving 
combination, with the drawn vehicle ECU via pins 
B3 and B6 of the EBS unit due to:
-

interruption on pins B3 and B6 of the EBS 
unit 

-

short circuit between pin B3 and pin B6 of 
the EBS unit

-

No noticeable system limitation in EBS

43-75

Interrupted CAN communication, with a driving 
combination, with the drawn vehicle ECU via pin 
B3 (CAN-H) of the EBS unit due to:
-

interruption on pin B3 of the EBS unit 

-

short circuit on pin B3 of the EBS unit 

-

No noticeable system limitation in EBS

43-76

Interrupted communication, with a driving 
combination, with the drawn vehicle ECU via pin 
B6 (CAN-L) of the EBS unit due to:
-

interruption on pin B6 of the EBS unit 

-

short circuit on pin B6 of the EBS unit 

-

No noticeable system limitation in EBS

45-16

Interruption, short circuit to earth or short circuit to 
supply on pin A18 of the EBS unit

-

No noticeable system limitation in EBS

51-21

Short circuit to earth on pin D11 of the EBS unit, 
ABS valve (B256)

-

ABS on front axle, left deactivated

51-22

Short circuit to supply on pin D11 of the EBS unit, 
ABS valve (B256)

-

ABS on front axle deactivated

Fault code

Fault code description with possible cause

Symptom

EBS

1-10

©

 200438

EBS fault codes

1

DAVIE XD diagnostics manual

51-23

Interruption on pin D12 of the EBS unit, ABS 
valve (B256)

-

ABS on front axle, left deactivated

51-24

Interruption on pin D11 of the EBS unit, ABS 
valve (B256)

-

ABS on front axle, left deactivated

51-25

Continuous actuation of ABS valve (B256) via 
pins D10 and D12 and/or D11 and D12 of the 
EBS unit due to:
-

internal short circuit in EBS unit

-

ABS on front axle deactivated

-

EBS pressure control on front axle and 
drawn vehicle deactivated

51-26

Interruption on pin D10 of the EBS unit, ABS 
valve (B256)

-

ABS on front axle, left deactivated

51-27

Short circuit to earth on pin D10 of the EBS unit, 
ABS valve (B256)

-

ABS on front axle, left deactivated

51-28

Short circuit to supply on pin D10 of the EBS unit, 
ABS valve (B256)

-

ABS on front axle deactivated

52-21

Short circuit to earth on pin C2 of the EBS unit, 
ABS valve (B257)

-

ABS on front axle, right deactivated

52-22

Short circuit to supply on pin C2 of the EBS unit, 
ABS valve (B257)

-

ABS on front axle deactivated

52-23

Interruption on pin C3 of the EBS unit, ABS valve 
(B257)

-

ABS on front axle, right deactivated

52-24

Interruption on pin C2 of the EBS unit, ABS valve 
(B257)

-

ABS on front axle, right deactivated

52-25

Continuous actuation of ABS valve (B527) via 
pins C1 and C3 and/or C2 and C3 of the EBS unit 
due to:
-

internal short circuit in EBS unit

-

ABS on front axle deactivated

-

EBS pressure control on front axle and 
drawn vehicle deactivated

52-26

Interruption on pin C1 of the EBS unit, ABS valve 
(B257)

-

ABS on front axle, right deactivated

52-27

Short circuit to earth on pin C1 of the EBS unit, 
ABS valve (B257)

-

ABS on front axle, right deactivated

52-28

Short circuit to supply on pin C1 of the EBS unit, 
ABS valve (B256)

-

ABS on front axle deactivated

53-32

Short circuit to earth on pin D12 or C3 of the EBS 
unit, ABS valve (B256 or B257)

-

No noticeable system limitation in EBS

53-33

Short circuit to supply on pin D12 or C3 of the 
EBS unit, ABS valve (B256 or B257)

-

ABS on front axle deactivated

55-12

Incorrect redundancy valve (B306) parameters 
due to:
-

redundancy valve connected to the EBS unit 
without the EBS unit having been 
programmed for a redundancy valve

-

ABS on front and rear axles deactivated

-

ASR brake/engine control deactivated

-

EBS pressure control on front axle, rear axle 
and drawn vehicle deactivated

55-31

Interruption in redundancy valve (B306), 
measured via pin B12 of the EBS unit

-

ABS on front and rear axles deactivated

-

ASR brake/engine control deactivated

-

EBS pressure control on rear axle 
deactivated

55-32

Short circuit to earth in redundancy valve (B306), 
measured via pin B12 of the EBS unit

-

ABS on front and rear axles deactivated

-

ASR brake/engine control deactivated

-

EBS pressure control on rear axle 
deactivated

Fault code

Fault code description with possible cause

Symptom

©

 200438

1-11

EBS fault codes

EBS

DAVIE XD diagnostics manual 

1

55-33

Short circuit to supply in redundancy valve 
(B306), measured via pin B12 of the EBS unit

-

ABS on front axle deactivated

57-12

Incorrect ASR cut-off valve (B309) parameters 
due to:
-

ASR cut-off valve connected to the EBS unit 
without the EBS unit having been 
programmed for an ASR cut-off valve

-

ABS on front and rear axles deactivated

-

ASR brake/engine control deactivated

-

EBS pressure control on front axle, rear axle 
and drawn vehicle deactivated

57-31

Interruption on pin C6 of the EBS unit, ASR cut-
off valve (B309)

-

ASR brake control deactivated

-

57-32

Short circuit to earth on pin C6 of the EBS unit, 
ASR cut-off valve (B309)

-

ASR brake control deactivated

-

57-33

Short circuit to supply on pin C6 of the EBS unit, 
ASR cut-off valve (B309)

-

No noticeable system limitation in EBS

61-16

The current through the front axle modulator 
(B307) magnet coil measured via pins D1 and D2 
of the EBS unit is incorrect due to:
-

copper short circuit in the magnet coil

-

short circuit or contact resistance between 
pins D1 and D2 of the EBS unit

-

EBS pressure control on front axle 
deactivated

61-55

Front axle modulator (B307) output pressure 
measured on pin D6 of the EBS unit is incorrect 
in relation to the current through the magnet coil 
due to:
-

defective pressure sensor

-

too low a supply pressure

-

EBS pressure control on front axle 
deactivated

62-42

Pressure sensor failure in front axle modulator 
(B307) due to:
-

short circuit to supply on pin D6 of the EBS 
unit

-

interruption on pin D3 of the EBS unit 

-

short circuit to supply on pin D5 of the EBS 
unit

-

Open circuit in EBS pressure control, front 
axle

62-43

With a nonactivated front axle modulator, the 
front axle modulator (B307) pressure sensor 
output signal on pin D6 of the EBS unit is too low 
or too high due to:
-

defective pressure sensor

-

no supply voltage or supply voltage too low 
on pin D9 of the EBS unit

-

interruption on pin D6 of the EBS unit 

-

short circuit to earth on pin D6 of the EBS 
unit

-

air pressure at connection point 4 of the front 
axle modulator (B307) if the foot brake valve 
(F628) is not activated

-

Open circuit in EBS pressure control, front 
axle

63-25

Permanent actuation of the front axle modulator 
(B307) due to:
-

short circuit to supply on one side and short 
circuit to earth on the other side

-

Brake remains applied to front axle

63-32

Short circuit to earth on pin D1 of the EBS unit, 
front axle modulator (B307)

-

EBS pressure control on front axle 
deactivated

Fault code

Fault code description with possible cause

Symptom

EBS

1-12

©

 200438

EBS fault codes

1

DAVIE XD diagnostics manual

63-33

Short circuit to supply on pin D1 of the EBS unit, 
front axle modulator (B307)

-

EBS pressure control on front axle 
deactivated

63-34

Short circuit to earth on pin D2 of the EBS unit, 
front axle modulator (B307)

-

EBS pressure control on front axle 
deactivated

63-35

Short circuit to supply on pin D2 of the EBS unit, 
front axle modulator (B307)

-

EBS pressure control on front axle 
deactivated

63-36

Interruption on pin D1 and/or D2 of the EBS unit, 
front axle modulator (B307)

-

EBS pressure control on front axle 
deactivated

64-13

The EBS unit parameters for the rear axle 
modulator type do not correspond with the 
parameters in the rear axle modulator (D879)

-

ABS on front and rear axles deactivated

-

ASR brake/engine control deactivated

-

EBS pressure control on front axle, rear axle 
and drawn vehicle deactivated

64-16

Fault in the solenoid valves of the rear axle 
modulator (D879)

-

ABS on front and rear axles deactivated

-

ASR brake/engine control deactivated

-

EBS pressure control on rear axle 
deactivated

64-51

Output pressure of the rear axle modulator 
(D879) is too high

-

ABS on rear axle deactivated

64-52

Brake pressure signal difference between both 
pressure sensors in rear axle modulator (D879) is 
too high

-

ABS on front and rear axles deactivated

-

ASR brake/engine control deactivated

-

EBS pressure control on rear axle 
deactivated

64-54

No pressure sensor signal in rear axle modulator 
(D879) or signal is incorrect (too high/too low)

-

ABS on front and rear axles deactivated

-

ASR brake/engine control deactivated

-

Open circuit in EBS pressure control, rear 
axle

64-64

CAN communication problem of the EBS unit with 
the rear axle modulator (D879) via pins B1 and 
B4 of the EBS unit

-

ABS on front and rear axles deactivated

-

ASR brake/engine control deactivated

-

EBS pressure control on rear axle 
deactivated

Supply voltage on pin B7 of the EBS unit 
interrupted

-

ABS on front and rear axles deactivated

-

ASR brake/engine control deactivated

-

EBS pressure control on rear axle 
deactivated

-

With an interruption on pin B7, connection 
points A9 and E4 inside the ECU will have a 
low voltage, causing brake pedal position 
sensor 2 to give no output signal, for 
instance. If the measurement is performed 
at B7, it will also turn out that B7 in this 
situation will be internally connected to earth 
in the ECU

Interrupted earth connection or contact 
resistance in the earth connection of the rear axle 
modulator (D879)

-

ABS on front and rear axles deactivated

-

ASR brake/engine control deactivated

-

EBS pressure control on rear axle 
deactivated

66-12

Incorrect drawn vehicle control valve (B308) 
parameters due to:
-

drawn vehicle control valve connected to the 
EBS unit without the EBS unit having been 
programmed for a drawn vehicle control 
valve

-

ABS on front and rear axles deactivated

-

ASR brake/engine control deactivated

-

EBS pressure control on front axle, rear axle 
and drawn vehicle deactivated

Fault code

Fault code description with possible cause

Symptom

 

 

 

 

 

 

 

Content   ..  157  158  159  160   ..