|
|
TEST ACTION APPLICABILITY 7 NOTE: Before continuing, check the PCM harness connector terminals for All Repair Replace and program the Powertrain Control Module in accor- 8 Ignition on, engine not running. t, monitor the TP Sensor voltage. Slowly open the throttle from the idle position to the wide open throttle position. All Yes → Refer to the INTERMITTENT CONDITION symptom in the Driveability category. No → Replace the Throttle Position Sensor. Perform POWERTRAIN VERIFICATION TEST VER - 5. 78 DRIVEABILITY - NGC P0123-THROTTLE POSITION SENSOR #1 HIGH — Continued |