|
|
Symptom: PASSENGER REAR WINDOW SWITCH MUX INPUT SHORT TO When Monitored and Set Condition: PASSENGER REAR WINDOW SWITCH MUX INPUT SHORT TO GROUND - PDM When Monitored: Continuously. Set Condition: If the voltage on the Passenger Rear Window Switch Mux circuit is below 0.1 volt for over 1 seconds, this code will set. POSSIBLE CAUSES DTC PRESENT REAR SWITCH PASSENGER REAR WINDOW SWITCH MUX CIRCUIT SHORT TO GROUND. PASSENGER DOOR MODULE TEST ACTION APPLICABILITY 1 Turn the ignition on. t, erase DTCs. Cycle the ignition switch from Off to Run. t, read DTCs. Does the DRBIII t display PASSENGER REAR WINDOW SWITCH MUX CIRCUIT SHORT TO GROUND? All Yes → Go To 2 No → The condition that caused this code to set is not present at this time. Operate the rear switch several times to ensure it does not 2 Disconnect the Passenger Rear Window Switch connector. t, erase DTCs. Cycle the ignition switch from Off to Run. t, read DTCs. Does the DRBIII t display PASSENGER REAR WINDOW SWITCH MUX CIRCUIT SHORT TO GROUND? All Yes → Go To 3 No → Replace the Rear Window Switch. Perform BODY VERIFICATION TEST - VER 1. 1029 POWER WINDOWS |