|
|
TEST ACTION APPLICABILITY 3 Disconnect the Cinch/Release Motor connector (latch).. All Yes → Go To 4 No → Repair the Ground circuit for high resistance. Perform BODY VERIFICATION TEST - VER 1. 4 With the DRBIII t in Inputs/Outputs, read the PAWL SW and the RATCHET SW states. All No → Replace the Cinch Release Motor (Latch) Assembly. Perform BODY VERIFICATION TEST - VER 1. Yes → Lubricate the latch and check for any sticking conditions. If unable to isolate problem, replace the Cinch Release Motor (Latch 825 POWER DOORS - LIFTGATE INCOMPLETE LATCH RELEASE- OVER CURRENT — Continued |