|
|
Symptom: *DRIVER DOOR AJAR CIRCUIT OPEN POSSIBLE CAUSES DRIVER DOOR MODULE NOT RESPONDING TO INPUT OPEN DRIVER DOOR AJAR SWITCH GROUND CKT OPEN DRIVER DOOR LOCK MOTOR/AJAR SWITCH OPEN DRIVER DOOR AJAR SWITCH SENSE CIRCUIT DRIVER DOOR MODULE TEST ACTION APPLICABILITY 1 Open the driver door. t in Inputs/Outputs, read the DRVR DOOR AJAR SW state. Does the DRBIII t display CLOSED? All Yes → Replace the Driver Door Module. Perform BODY VERIFICATION TEST - VER 1. No → Go To 2 2 Disconnect the Driver Door Lock Motor/Ajar switch connector All Yes → Go To 3 No → Repair the Driver Door Ajar Switch Ground circuit for an open top the Driver Door Module. 3 Disconnect the Driver Door Lock Motor/Ajar Switch connector. t in Inputs/Outputs, read the DRVR DOOR AJAR SW state. Connect a jumper wire between Sense circuit and the Ground circuit. t display DRVR DOOR AJAR SW: CLOSED? All Yes → Replace the Driver Door Lock Motor/Ajar Switch (door latch) in accordance with the Service Information. No → Go To 4 4 Disconnect the DDM harness connector. All Yes → Replace the Driver Door Module in accordance with the Service Information. No → Repair the Driver Door Ajar Switch Sense circuit for an open. Perform BODY VERIFICATION TEST - VER 1. 417 DOOR AJAR |