|
|
(P0135) O2 SENSOR 1/1 HEATER CIRCUIT HIGH (CONTINUED) 7. INTERMITTENT WIRING AND CONNECTORS The conditions necessary to set this DTC are not present at this time. Note: Check connectors — Clean/repair as necessary. Poor pin to terminal connections can set DTCs. Using Note: Check for any Technical Service Bulletins that may apply. Were there any problems found? Yes >> Repair as necessary. Perform POWERTRAIN VERIFICATION TEST - VER 2. No >> The condition that caused this DTC to set is currently not present. Inspect the related wiring harness for a possible intermittent condition. ZH ENGINE - ELECTRICAL DIAGNOSTICS 9 - 157 |