|
|
REMOVAL NOTE: A battery reconnect procedure must be per- (Refer to 8 - ELECTRICAL/BATTERY SYSTEM - STANDARD PROCEDURE). 1. Disconnect and isolate the battery negative cable. 2. Remove the door trim panel. 3. Remove the power mirror switch from the door trim panel by twisting the switch counter-clockwise. INSTALLATION NOTE: A battery reconnect procedure must be per- (Refer to 8 - ELECTRICAL/BATTERY SYSTEM - STANDARD PROCEDURE). 1. Install power mirror switch to door trim panel. 2. Connect wire harness connectors to switches. 3. Install door trim panel. 4. Connect battery negative cable. 8N - 118 POWER MIRRORS - SERVICE INFORMATION LX |