|
|
Content .. 1105 1106 1107 1108 ..
• ZONE 1 1 Fuel Cap 2 Recirculation Check Valve. 3 Vapor Recirculation Line. 4 Signal Vapor Line for FVM. 5 Flow Management Valve. 6 Fuel Tank to Canister Vapor Line connection. 7 Fuel Tank Vent (Check Valve). 8 Vapor Line to Canister. 9 Flow Control Orfice. 10 Control Valve. 11 Liquid Trap. 12 Fuel Tank. 13 Check valve. 14 Fuel Fill Tube to Tank connector. 15 Fuel Fill Tube Damaged or disconnected EVAP system components. • ZONE 2 1 Filter. 2 NVLD. 3 Canister Vent Line. 4 Evap Canister. 5 Chassis Purge Valve. 6 Fuel Tank to Canister Vapor Line connection. 7 Evap Purge connection. • ZONE 3 1 Evap Purge Vacuum Line. 2 Connection to Chassis Line. 3 Connection to Canister. 4 Chassis Purge Line. 5 Evap Purge Vacuum Line. 6 Connection to Evap Purge Harness. 7 Chassis Evap Purge Line connection to Engine Vacuum. 8 Evap Purge Valve. 9 Service Port. NOTE: Carefully inspect the vent side of the EVAP Canister. Due to the filtering system in the canister the Was a leak found at the gas cap? Yes >> Go To 6 Perform the POWERTRAIN VERIFICATION TEST. (Refer to 9 - ENGINE - STANDARD PROCEDURE) No >> Go To 7 9 - 452 ENGINE ELECTRICAL DIAGNOSTICS LX |