|
|
Content .. 2058 2059 2060 2061 ..
24. Remove the heater hoses. Refer to Heater Inlet Hose Replacement (Non-HP2) and Heater Outlet Hose Replacement . Fig. 111: View Of Engine Harness Electrical Connectors & Inlet Hose Clamp 25. Disconnect the engine harness electrical connector (1) from the oil pressure sensor.
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
26. Disconnect the engine harness electrical connector (2) from the lifter oil manifold. Fig. 112: View Of Engine Ground Strap & Bolt 27. Remove the engine ground strap bolt from the rear of the left cylinder head and cowl and reposition.
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 113: View Of Battery Cable Terminals & Stud 28. Remove the negative battery cable stud (1) from the right cylinder head. 29. Remove the negative battery cable terminal (2) and the engine harness ground (3) from the right cylinder head. 30. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 114: View Of Engine Harness Components 31. Remove the engine harness clip (1) from the ground stud. 32. Remove the engine harness ground stud (2) from the engine block. 33. Remove the engine harness grounds (3) from the engine block. 34. Disconnect the engine harness electrical connector (4) from the knock sensor.
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Content .. 2058 2059 2060 2061 ..
|
|
|