|
|
Content .. 1738 1739 1740 1741 ..
STARTER SOLENOID CABLE REPLACEMENT (4.8L, 5.3L, 6.0L, AND 6.2L) Removal Procedure Fig. 137: View Of Mega Fuse Cover 1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (w/Single Battery) or Battery Negative Cable Disconnection and 2. Remove the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement . 3. Remove the mega fuse cover.
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Electrical - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 138: View Of Battery Cable Components 4. Remove the starter solenoid cable nut (1) from the mega fuse stud. 5. Remove the starter solenoid cable terminal (2) from the mega fuse stud. 6. Open the starter solenoid cable cover at the positive battery terminal. 7. Loosen the starter solenoid cable nut (5). 8. Remove the starter solenoid cable from the positive battery terminal. 9. Remove the starter solenoid cable clip (4) from the air conditioning (A/C) evaporator tube.
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Electrical - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 139: View Of Oil Pan Skid Plate & Bolts 10. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . 11. For 1500 series vehicles, remove the oil pan skid plate bolts and plate.
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Electrical - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 140: View Of Oil Pan Skid Plate & Bolts 12. For 2500 series vehicles, remove the front 2 oil pan skid plate bolts, loosen the rear 2 bolts and remove the skid plate.
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Electrical - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Content .. 1738 1739 1740 1741 ..
|
|
|