|
|
-- Install the brake shoe and parking brake lever, and reassemble the return spring, as shown in the -- Fix the parking brake cable on the parking brake lever, and install the brake shoe on the brake -- Install the lower return spring, and adjust the return spring and the spring of wedge-shaped -- Install the brake drum and rear wheel hub bearing. -- Forcefully step on the brake pedal several times to make the friction lining of brake in place. REPLACEMENT OF FRICTION LINING OF BRAKE -- Check whether there are some oil stains on the surface of friction lining of brake, and use an Caution: The friction lining of brake shall be from the same manufacturer and with INSPECTION OF REAR WHEEL DRUM BRAKE shown in the figure. In case there are some scratches and indentions on Caution: The inner diameter shall not be greater than the service limit when the inner P-13 |