Автомобили Chery: руководства по ТО - часть 58

深 圳 市 元 征 科 技 股 份 有 限 公 司  

  LAUNCH TECH CO., LTD. 

 

                                                                    深圳市元征软件开发有限公司      LAUNCH SOFTWARE DEVELOPMENT CO.,LTD. 

地址:518112 广东省深圳市龙岗区坂雪岗工业区五和大道北元征工业园  

ADD:

 LAUNCH INDUSTRIAL PARK,NORTH OF WUHE ROAD,BANXUEGABF,LONGGANG DISTRICT, SHENZHEN,P.R,CHINA.

 

电话

TEL:86-755-84528427  传真 FAX:86-755-84528454 

 

 

 

 

保留一切解释权，处置权，包括复印及传达至第三方。 

   

 

 
 

编写：黄惠生    2008-9-11      15:01    第 183 页      总 274 页 

"P0645","AC clutch relais circuit " 
"P0646","A/C Clutch Relay Control Circuit Low " 
"P0647","A/C Clutch Relay Control Circuit High" 
"P0650","Malfunction Indicator Lamp Control Circ. " 
"P0660","Intake Manifold Tuning Valve Control Circuit/Open （Bank 1） " 
"P0661","Intake Manifold Tuning Valve Control Circuit Low （Bank 1）" 
"P0662","Intake Manifold Tuning Valve Control Circuit High （Bank 1） " 
"P0688","EMC/PCM Power Relay Sense Circuit Open " 
"P0691","Cooling Fan 1 Control Circuit Low" 
"P0692","Cooling Fan 1 Control Circuit High " 
"P0693","Cooling Fan 2 Control Circuit Low" 
"P0694","Cooling Fan 2 Control Circuit High " 
"P0700","Transm.Contr.System Malfunction" 
"P0704","Clutch Switch Input Circuit" 
"P1336","Engine torque control Adaption at limit" 
"P1545","Throttle Pos.Contr. Malfunction" 
"P1558","Throttle Actuator Electrical Malfunction " 
"P1559","Idle Speed Contr.Throttle Pos. Adaptation Malfunction" 
"P1564","Idle Speed Contr.Throttle Pos. Low Voltage During Adaptation " 
"P1565","Idle Speed Control Throttle Position lower limit not attained" 
"P1568","Idle Speed Contr.Throttle Pos. mechanical Malfunction" 
"P1579","Idle Speed Contr.Throttle Pos. adaptation not started" 
"P1604","Internal Control Module Driver Error " 
"P1610","Manufacturer controlled computer and auxiliary outputs " 
"P1611","Manufacturer controlled computer and auxiliary outputs " 
"P1612","Manufacturer controlled computer and auxiliary outputs " 
"P1613","Manufacturer controlled computer and auxiliary outputs " 
"P1614","Manufacturer controlled computer and auxiliary outputs " 
"P1651","Manufacturer controlled computer and auxiliary outputs " 
"P2106","Throttle Actuator Control System Forced Limited Power" 
"P2122","Throttle/Pedal Pos. Sens./Switch D Circuit Low Input " 
"P2123","Throttle/Pedal Pos. Sens./Switch D Circuit Low Input " 
"P2127","Throttle/Pedal Pos. Sens./Switch E Circuit Low Input " 
"P2128","Throttle/Pedal Pos. Sens./Switch E Circuit High Input" 
"P2138","Throttle/Pedal Pos. Sens./Switch D Circuit Low Input " 
"P2177","System Too Lean Off Idle " 
"P2178","System Too Rich Off Idle " 
"P2187","System Too Lean at Idle" 

PDF 文件使用 "pdfFactory Pro" 试用版本创建  

ÿ 

 

 

 

 

 

 

 

www.fineprint.com.cn

深 圳 市 元 征 科 技 股 份 有 限 公 司  

  LAUNCH TECH CO., LTD. 

 

                                                                    深圳市元征软件开发有限公司      LAUNCH SOFTWARE DEVELOPMENT CO.,LTD. 

地址:518112 广东省深圳市龙岗区坂雪岗工业区五和大道北元征工业园  

ADD:

 LAUNCH INDUSTRIAL PARK,NORTH OF WUHE ROAD,BANXUEGABF,LONGGANG DISTRICT, SHENZHEN,P.R,CHINA.

 

电话

TEL:86-755-84528427  传真 FAX:86-755-84528454 

 

 

 

 

保留一切解释权，处置权，包括复印及传达至第三方。 

   

 

 
 

编写：黄惠生    2008-9-11      15:01    第 184 页      总 274 页 

"P2188","System Too Rich at Idle" 
"P2195","O2 Sensor Signal Stuck Lean; Bank 1 Sensor 1 " 
"P2196","O2 Sensor Signal Stuck Rich; Bank 1 Sensor 1 " 
"P2270","O2 Sensor Signal Stuck Lean; Bank 1 Sensor 2 " 
"P2271","O2 Sensor Signal Stuck Rich; Bank 1 Sensor 2 " 
"P0400","Exhaust Gas Recirculation Flow " 
"P0401","Exhaust Gas Recirculation Flow Insufficient Detected " 
"P0402","Exhaust Gas Recirculation Flow Excessive Detected" 
"P0403","Exhaust Gas Recirculation Control Circuit" 
"P0404","Exhaust Gas Recirculation Control Circuit Range/Performance" 
"P0405","Exhaust Gas Recirculation Sensor “A” Circuit Low " 
"P0406","Exhaust Gas Recirculation Sensor “A” Circuit High" 
"P0409","Exhaust Gas Recirculation Sensor “A” Circuit " 
"P0489","Exhaust Gas Recirculation Control Circuit “A” Low" 
"P0490","Exhaust Gas Recirculation Control Circuit “A” High " 
"P2008","Intake Manifold Runner Control Circuit/Open" 
"P2009","Intake Manifold Runner Control Circuit Low " 
"P2010","Intake Manifold Runner Control Circuit High" 
"P2014","Intake Manifold Runner Position Sensor/Switch Circuit" 
"P2015","Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance" 
"P2016","Intake Manifold Runner Position Sensor/Switch Circuit Low" 
"P2017","Intake Manifold Runner Position Sensor/Switch Circuit High " 
"P0411","Secondary Air Injection System Incorrect Flow Detected " 
"P0413","Secondary Air Injection System Switching Valve “A” Circuit Open" 
"P0414","Secondary Air Injection System Switching Valve “A” Circuit Shorted " 
"P0418","Secondary Air Injection System Control “A” Circuit " 
"P2257","Secondary Air Injection System Control “A” Circuit Low " 
"P2258","Secondary Air Injection System Control “A” Circuit High" 
"P2440","Secondary Air Injection System Switching Valve Stuck Open" 
"P000A","“A” Camshaft Position Slow Response" 
"P000B","“B” Camshaft Position Slow Response" 
"P0010","“A” Camshaft Position Actuator Circuit / Open" 
"P0011","“A” Camshaft Position – Timing Over-Advanced or System Performance" 
"P0012","“A” Camshaft Position – Timing Over-Retarded" 
"P0013","“B” Camshaft Position – Actuator Circuit / Open " 
"P0014","“B” Camshaft Position – Timing Over-Advanced or System Performance" 
"P0015","“B” Camshaft Position – Timing Over-Retarded" 
"P2088","“A“ Camshaft Position Actuator Control Circuit Low " 

PDF 文件使用 "pdfFactory Pro" 试用版本创建  

ÿ 

 

 

 

 

 

 

 

www.fineprint.com.cn

深 圳 市 元 征 科 技 股 份 有 限 公 司  

  LAUNCH TECH CO., LTD. 

 

                                                                    深圳市元征软件开发有限公司      LAUNCH SOFTWARE DEVELOPMENT CO.,LTD. 

地址:518112 广东省深圳市龙岗区坂雪岗工业区五和大道北元征工业园  

ADD:

 LAUNCH INDUSTRIAL PARK,NORTH OF WUHE ROAD,BANXUEGABF,LONGGANG DISTRICT, SHENZHEN,P.R,CHINA.

 

电话

TEL:86-755-84528427  传真 FAX:86-755-84528454 

 

 

 

 

保留一切解释权，处置权，包括复印及传达至第三方。 

   

 

 
 

编写：黄惠生    2008-9-11      15:01    第 185 页      总 274 页 

"P2089","“A” Camshaft Position Actuator Control Circuit High" 
"P2090","“B” Camshaft Position Actuator Control Circuit Low " 
"P2091","“B” Camshaft Position Actuator Control Circuit High" 
"P0033","Turbocharger/Supercharger Bypass Valve Control Circuit " 
"P0034","Turbocharger/Supercharger Bypass Valve Control Circuit Low " 
"P0035","Turbocharger/Supercharger Bypass Valve Control Circuit High" 
"P0234","Turbocharger/Supercharger Overboost Condition" 
"P0236","Turbocharger/Supercharger Boost Sensor “A” Circuit Range/Performance " 
"P0237","Turbocharger/Supercharger Boost Sensor “A” Circuit Low " 
"P0238","Turbocharger/Supercharger Boost Sensor “A” Circuit High" 
"P0243","Turbocharger/Supercharger Wastegate Solenoid “A” " 
"P0245","Turbocharger/Supercharger Wastegate Solenoid “A” Low " 
"P0246","Turbocharger/Supercharger Wastegate Solenoid “A” High" 
"P0299","Turbocharger/Supercharger Underboost " 
"P1297","Manufacturer controlled computer and auxiliary outputs " 
"P2261","Turbocharger/Supercharger Bypass Valve – Mechanical " 
"U0001","High Speed CAN defectiv" 
"U0101","Lost Communication with TCM" 
"U0104","Lost Communication With Cruise Control Module" 
"U0121","Lost Communication With Anti-Lock Brake System (ABS) Control Module" 
"U0155","Lost communication with Instrument Panel Cluster control module" 
"U0415","Invalid data received from ABS control module" 

7.1.5  1.9L 柴油电喷系统 

"P0531-01 ","空调压力传感器电路故障 "  
"P0531-02","空调压力 1 故障"  
"P1100-01"," LdlAdjVal 高于最大值"  
"P1100-02"," LdlAdjVal 低于最小值 "  
"P0128-08","在设定时间内冷却水温传感器绝对测试没有达到最小温度"  
"P0116-08","在设定时间内冷却水温传感器动态测试没有达到最小温差变化"  
"P0301-01","检测到第一缸的失火次数超过限制"  
"P0302-01","检测到第二缸的失火次数超过限制"  
"P0303-01","检测到第三缸的失火次数超过限制"  
"P0304-01","检测到第四缸的失火次数超过限制"  
"P0305-01","检测到第五缸的失火次数超过限制"  
"P0306-01","检测到第六缸的失火次数超过限制"  
"P0300-01","多缸检测到的失火次数超过限制"  

PDF 文件使用 "pdfFactory Pro" 试用版本创建  

ÿ 

 

 

 

 

 

 

 

www.fineprint.com.cn

深 圳 市 元 征 科 技 股 份 有 限 公 司  

  LAUNCH TECH CO., LTD. 

 

                                                                    深圳市元征软件开发有限公司      LAUNCH SOFTWARE DEVELOPMENT CO.,LTD. 

地址:518112 广东省深圳市龙岗区坂雪岗工业区五和大道北元征工业园  

ADD:

 LAUNCH INDUSTRIAL PARK,NORTH OF WUHE ROAD,BANXUEGABF,LONGGANG DISTRICT, SHENZHEN,P.R,CHINA.

 

电话

TEL:86-755-84528427  传真 FAX:86-755-84528454 

 

 

 

 

保留一切解释权，处置权，包括复印及传达至第三方。 

   

 

 
 

编写：黄惠生    2008-9-11      15:01    第 186 页      总 274 页 

"P0856-01","减速控制系统不合理的需求"  
"P1109-01","性能限制逻辑的错误状态为 0"  
"P110A-02","性能限制逻辑的错误状态为 1"  
"P110B-04","性能限制逻辑的错误状态为 2"  
"P110C-08","性能限制逻辑的错误状态为 3"  
"P161F-01","压缩测试报错"  
"P0704-04","CAN 离合器信号没有定义"  
"P0704-08","离合器信号没有定义"  
"P0575-08","巡航控制信号状态不准确"  
"P1605-01","发动机转速信号电路对电源短路"  
"P1606-02","发动机转速信号电路对地短路"  
"P1607-04","发动机转速信号电路开路"  
"P0073-01","环境温度超过上限"  
"P0072-02","环境温度低于下限"  
"P0071-04","环境温度信号错误"  
"P2530-04","发动机舱停止按钮不能正常工作"  
"P062F-01","EEPROM 内数据出现错误"  
"P0490-01","EGR 控制电路对电源短路"  
"P0489-02","EGR 控制电路对地短路"  
"P0404-04","EGR 控制电路开路"  
"P0403-08","EGR 控制电路温度过高"  
"P245D-01","EGR-cooler 旁通阀控制电路对电源短路"  
"P245C-02","EGR-cooler 旁通阀控制电路对地短路"  
"P245A-04","EGR-cooler 旁通阀控制电路开路"  
"P245B-08","EGR-cooler 旁通阀控制电路温度过高"  
"P0406-01","EGR 电磁阀控制电路电压超过上限"  
"P0405-02","EGR 电磁阀控制电路电压低于下限"  
"P1200-01","第一缸喷油器过滤后的加电时间超过标定上限"  
"P1201-02","第一缸喷油器过滤后的加电时间低于标定下限"  
"P1202-01","第二缸喷油器过滤后的加电时间超过标定上限"  
"P1203-02","第二缸喷油器过滤后的加电时间低于标定下限"  
"P1204-01","第三缸喷油器过滤后的加电时间超过标定上限"  
"P1205-02","第三缸喷油器过滤后的加电时间低于标定下限"  
"P1206-01","第四缸喷油器过滤后的加电时间超过标定上限"  
"P1207-02","第四缸喷油器过滤后的加电时间低于标定下限"  
"P1208-01","第五缸喷油器过滤后的加电时间超过标定上限"  
"P1209-02","第五缸喷油器过滤后的加电时间低于标定下限"  
"P120A-01","第六缸喷油器过滤后的加电时间超过标定上限"  

PDF 文件使用 "pdfFactory Pro" 试用版本创建  

ÿ 

 

 

 

 

 

 

 

www.fineprint.com.cn