|
|
a. On the back of the wheel arch, remove the screws (B) If equipped, remove the front splash guard (C) (Canadian model). b. From under the front bumper (D), remove the bolt (E) securing the front bumper, splash shield (F), and front inner fender, and remove the clip (G) securing the front bumper and front inner fender. c. From the wheel arch, remove the clips (H, I, J) securing the front inner fender (and splash shield) on the body. d. Release the hook (K) of the splash shield, then remove the front inner fender. Fig. 31: Removing Front Inner Fender 2. Install the inner fender in the reverse order of removal, and note these items: z Replace any damaged clips. z Push the clips into place securely. SPLASH SHIELD REPLACEMENT
2004 Acura TSX 2004 ACCESSORIES & EQUIPMENT Exterior Trim - TSX
|