Porshe 911 (997). Manual - part 974

 

  Index      Hummer     Porshe 911 997 series - service repair manual 2004-2008 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  972  973  974  975   ..

 

 

Porshe 911 (997). Manual - part 974

 

 

AVERTISSEMENT

Risque de perte de la correspondance texte-illustration lors de l'impression papier.

Pour des raisons techniques, il ne peut pas être exclu à l'heure actuelle que, même
en cas d'affichage correct à l'écran, la correspondance entre le texte et l'illustration
puisse être erronée sur l'impression papier.

• 

Si l'erreur passe inaperçue, on court le risque d'exécuter certaines opérations de
manière incorrecte pouvant conduire à des dommages corporels et matériels.

• 

→ Comparez impérativement pour cette raison les impressions papier avec l'affichage à l'écran.
Corrigez-les en cas d'erreur de manière à reproduire correctement l'affichage à l'écran.

ATTENZIONE

Pericolo di perdita dell'abbinamento testo-immagine nella stampa.

Per motivi tecnici non è escluso che, nonostante la rappresentazione sullo schermo
risulti perfetta, durante la stampa venga persa la corrispondenza fra testo e
relativa immagine.

• 

Se tale difetto non viene rilevato vi è il pericolo che i lavori non siano eseguiti
correttamente; ciò può avere come conseguenza lesioni e danneggiamenti.

• 

→ Per questo motivo, dopo la stampa è assolutamente necessario confrontare le stampe con la
rappresentazione sullo schermo. In caso di errore si prega di correggere le stampe, così da
garantire la riproduzione esatta della rappresentazione sullo schermo.

ADVERTENCIA

Al imprimir se corre el riesgo de perder la correcta asignación de las figuras al texto.

Por motivos técnicos, por el momento no se puede descartar que, aun siendo
correcta la imagen que aparezca en la pantalla, al imprimir se pierda la
correlación entre el texto y la figura correspondiente.

• 

Si este error pasara desapercibido, existe el riesgo de que los trabajos no se
ejecuten de forma correcta y, por tanto, se produzcan daños personales y
materiales.

• 

→ Por ello le rogamos que tras el proceso de impresión compare siempre las copias impresas con
la imagen de la pantalla. En caso de error, corrija las copias impresas de forma que se
correspondan con el contenido de la imagen de la pantalla.

Diagnostic system: reading out fault memory and activating systems

Installing hazard warning light switch

4053

- Preliminary work
- Technical values
- Removing front control unit
- Installing front control unit
- Subsequent work
- Coding control unit

Tools

Designation

Type

Number

Explanation

PIWIS tester

special tool

9718

Preliminary work

Preliminary work - front control unit

Remove luggage compartment lining in the area around the front control unit.
→ 703019 Removing and installing luggage compartment cover - "Removing" chapter  [997110 997111
997120 997121 997310 997311 997320 997321]
→ 703019 21 Removing and installing luggage compartment
cover - "Removing" chapter  [997410 997411 997430 997431 997610 997611 997620 997621]

Technical values

Technical values - front control unit

→ M6: 7.5 ftlb.

4054

Removing front control unit

Removing front control unit

Installation Location:

Install location

If a new control unit has to be installed, read out as much of the data from the old control unit as possible
using the PIWIS tester 9718. → 944919 Removing and installing front control unit - "Coding" chapter

WARNING

Risk of damage to electronic control modules.

If care is not taken, electrical and electronic components may be destroyed.

• 

→ Before removing the control module, switch off the ignition and remove the ignition key.

Diagnostic system: reading out fault memory and activating systems

Technical values - front control unit

4055

Removing the cover

1. Unscrew fastening screw -3- .

2. Push a screwdriver into the openings -A- and unclip the four clips holding the cover -1- .

Electrical plug

3. Release and unplug both electric connectors -A- and disengage the left and right electric lines on the

control unit.

Detaching control unit.

4. Unscrew the fastening nuts -2- , lift up the control unit and detach

it.

Installing front control unit

Diagnostic system: reading out fault memory and activating systems

Removing front control unit

4056

 

 

 

 

 

 

 

Content   ..  972  973  974  975   ..