Porshe 911 (997). Manual - part 558

Overview, front spoiler

Removing side covering frame

1. Carefully press in the lugs of the covering frame at the side -2- with a screwdriver -Pfeil A- .

Firstly remove the covering frame -2- downwards -Pfeilrichtung B- . Afterwards pull rearward
direction of -Pfeilrichtung C- out of the front end -1- .

Removing fastening clip for wiring harness

Installation Location:

Diagnostic system: reading out fault memory and activating systems

Removing side covering frame

2389

Overview, front spoiler

Removing fastening clip for wiring harness

1. Insert a screwdriver between front spoiler -1- and fastening clip -2- and carefully remove. Check fastening

clip -2- , replace if necessary.

Removing expanding nut for licence plate holder

Installation Location:

Diagnostic system: reading out fault memory and activating systems

Removing fastening clip for wiring harness

2390

Overview, front spoiler

Removing expanding nut for licence plate holder

1. Press together expanding nut -2- and remove from the front spoiler -1- .

Pulling off joining latch

Installation Location:

Diagnostic system: reading out fault memory and activating systems

Removing expanding nut for licence plate holder

2391

Overview, front spoiler

Pulling off joining latch

1. Pull joining latch -2- from the front spoiler -1- .

Assembling front spoiler

Affixing joining latch

Installation Location:

Diagnostic system: reading out fault memory and activating systems

Pulling off joining latch

2392