Nissan Rogue (2023 year). Manual in english - page 29

 

  Index      Manuals     Nissan Rogue (2023 year). Manual in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

 

 

 

Content      ..     27      28      29      30     ..

 

 

 

Nissan Rogue (2023 year). Manual in english - page 29

 

 

6-16

In case of emergency

When towing your vehicle, all jurisdic-
tional and local regulations for towing
must be followed. Incorrect towing equip-
ment could damage your vehicle. Towing
instructions are available from a NISSAN
dealer. Local service operators are gen-
erally familiar with the applicable laws
and procedures for towing. To assure
proper towing and to prevent accidental
damage to your vehicle, NISSAN recom-
mends that you have a service operator
tow your vehicle. It is advisable to have
the service operator carefully read the
following precautions.

WARNING

.

Never ride in a vehicle that is
being towed.

.

Never get under your vehicle after
it has been lifted by a tow truck.

CAUTION

.

When towing, make sure that the
transmission, axles, steering sys-
tem and powertrain are in work-
ing condition. If any of these
conditions apply, dollies or a
flatbed tow truck must be used.

.

Always attach safety chains be-
fore towing.

(See “Flat towing for All–Wheel Drive
vehicle” (P.10-29) or “Flat towing for
Front-Wheel Drive vehicle” (P.10-29).)

NOTE:

If the battery is completely drained, the
transmission will not manually shift to
other positions. For shifting to other
positions, charge the battery or supply
power following the jump starting pro-
cedure. Push the park button to shift to
the P (Park) position before shifting to
other positions.

TOWING YOUR VEHICLE

-------------------------------------------------------------------------------------------------------------------------------------------------------------

SCE0952

TOWING RECOMMENDED BY
NISSAN

All-Wheel Drive (AWD) models

NISSAN recommends that towing dollies
be used when towing your vehicle or the
vehicle be placed on a flat bed truck as
illustrated.

CAUTION

Never tow All-Wheel Drive (AWD)
models equipped with a Continu-
ously Variable Transmission (CVT)
with any of the wheels on the ground
as this may cause serious and ex-

pensive damage to the transfer case
and transmission.

In case of emergency

6-17

-------------------------------------------------------------------------------------------------------------------------------------------------------------

6-18

In case of emergency

SCE0950

Two-Wheel Drive (2WD) models

NISSAN recommends that your vehicle be
towed with the driving (front) wheels off
the ground or place the vehicle on a flat
bed truck as illustrated.

NOTE:

If the electronic parking brake is re-
l e a s e d , t h e r e a r w h e e l s c a n b e
grounded while towing. If the electronic
parking brake is not released, towing
dollies should be used. For additional
information, refer to “Parking brake”
(P.5-25).

CAUTION

Never tow CVT models with the front
wheels on the ground or four wheels
on the ground (forward or back-
ward), as this may cause serious
and expensive damage to the trans-
mission. If it is necessary to tow the
vehicle with the rear wheels raised,
always use towing dollies under the
front wheels.

VEHICLE RECOVERY (freeing a stuck
vehicle)

WARNING

To avoid vehicle damage, serious
personal injury or death when reco-
vering a stuck vehicle:

.

Contact a professional towing
service to recover the vehicle if
you have any questions regard-
ing the recovery procedure.

.

Tow chains or cables must be
attached only to main structural
members of the vehicle.

.

Do not use the vehicle tie-downs
to tow or free a stuck vehicle.

.

Only use devices specifically de-
signed for vehicle recovery and
follow the manufacturer’s in-
structions.

.

Always pull the recovery device
straight out from the front of the
vehicle. Never pull at an angle.

.

Route recovery devices so they
do not touch any part of the
vehicle except the attachment
point.

If your vehicle is stuck in sand, snow, mud,

-------------------------------------------------------------------------------------------------------------------------------------------------------------

etc., use a tow strap or other device
designed specifically for vehicle recovery.
Always follow the manufacturer’s instruc-
tions for the recovery device.

Rocking a stuck vehicle

WARNING

.

Stand clear of a stuck vehicle.

.

Do not spin your tires at high
speed. This could cause them to
explode and result in serious in-
jury. Parts of your vehicle could
also overheat and be damaged.

If your vehicle is stuck in sand, snow, mud,
etc., use the following procedure:

1.

Turn off the Vehicle Dynamic Control
(VDC) system.

2.

Make sure the area in front and
behind the vehicle is clear of obstruc-
tions.

3. Turn the steering wheel right and left

to clear an area around the front tires.

4. Slowly rock the vehicle forward and

backward.

.

Shift back and forth between R

(Reverse) and D (Drive).

.

Apply the accelerator as little as

possible to maintain the rocking
motion.

.

Release the accelerator pedal be-

fore shifting between R and D.

.

Do not spin the tires above 35 MPH

(55 km/h).

5. If the vehicle cannot be freed after a

few tries, contact a professional tow-
ing service to remove the vehicle.

In case of emergency

6-19

-------------------------------------------------------------------------------------------------------------------------------------------------------------

7 Appearance and care

Cleaning exterior ........................................................................... 7-2

Washing ......................................................................................... 7-2
Waxing ............................................................................................ 7-3
Removing spots ...................................................................... 7-3
Underbody ................................................................................... 7-3
Glass ................................................................................................. 7-3
Wheels ............................................................................................. 7-3
Aluminum alloy wheels ..................................................... 7-4
Chrome parts ............................................................................ 7-4
Tire dressing .............................................................................. 7-4

Cleaning interior ........................................................................... 7-4

Air fresheners ......................................................................... 7-5
Floor mats ................................................................................. 7-5
Seat belts ................................................................................... 7-7
Cleaning the seat tracks ............................................... 7-7

Corrosion protection ................................................................ 7-7

Most common factors contributing to

vehicle corrosion.................................................................. 7-7
Environmental factors influence the rate

of corrosion.............................................................................. 7-7
To protect your vehicle from corrosion............ 7-8

-------------------------------------------------------------------------------------------------------------------------------------------------------------

7-2

Appearance and care

In order to maintain the appearance of
your vehicle, it is important to take proper
care of it.

To protect the paint surfaces, wash your
vehicle as soon as you can:

.

after a rainfall to prevent possible
damage from acid rain

.

after driving on coastal roads

.

when contaminants such as soot, bird
droppings, tree sap, metal particles or
bugs get on the paint surface

.

when dust or mud builds up on the
surface

Whenever possible, store or park your
vehicle inside a garage or in a covered
area.

When it is necessary to park outside, park
in a shady area or protect the vehicle with
a body cover.

Be careful not to scratch the paint
surface when putting on or removing
the body cover.

WASHING

Wash dirt off the vehicle with a wet
sponge and plenty of water. Clean the
vehicle thoroughly using a mild soap, a
special vehicle soap or general purpose
dishwashing liquid mixed with clean, lu-
kewarm (never hot) water.

CAUTION

.

Do not concentrate water spray
directly on the sonar sensors on
the bumper as this will result in
damage to the sensors. Do not
use pressure washers capable of
spraying water over 1,200 psi
(8,274 kPa) to wash your vehicle.
Use of high-pressure washers
over, 1,200 psi (8,274 kPa) can
result in damage to or removal
of paint or graphics. Avoid using a
high-pressure washer closer than
12 inches (30 cm) to the vehicle.
Always use a wide-angle nozzle
only, keep the nozzle moving and
do not concentrate the water
spray on any one area.

.

Do not use car washes that use
acid in the detergent. Some car
washes, especially brushless
ones, use some acid for cleaning.
The acid may react with some
plastic vehicle components, caus-
ing them to crack. This could
affect their appearance, and also
could cause them not to function
properly. Always check with your
car wash to confirm that acid is
not used.

.

Do not wash the vehicle with
strong household soap, strong
chemical detergents, gasoline or
solvents.

.

Do not wash the vehicle in direct
sunlight or while the vehicle body
is hot, as the surface may become
water-spotted.

.

Avoid using tight-napped or
rough cloths, such as washing
mitts. Care must be taken when
removing caked-on dirt or other
foreign substances so the paint
surface is not scratched or da-
maged.

.

Do not wash the engine compart-
ment. Doing so may cause a fail-
ure in engine starting or a
malfunction. The possibility of
water intrusion into electrical
connections may result in a short
circuit or electrical components
to malfunction.

Rinse the vehicle thoroughly with plenty
of clean water.

Inside flanges, seams and folds on the
doors, hatches and hood are particularly
vulnerable to the effects of road salt.
Therefore, these areas must be regularly
cleaned. Make sure that the drain holes in

CLEANING EXTERIOR

-------------------------------------------------------------------------------------------------------------------------------------------------------------

the lower edge of the door are open.
Spray water under the body and in the
wheel wells to loosen the dirt and wash
away road salt.

Avoid leaving water spots on the paint
surface by using a damp chamois to dry
the vehicle.

WAXING

Regular waxing protects the paint surface
and helps retain new vehicle appearance.
Polishing is recommended to remove
built-up wax residue and to avoid a
weathered appearance before reapplying
wax.

A NISSAN dealer can assist you in choos-
ing the proper product.

.

Wax your vehicle only after a thorough
washing. Follow the instructions sup-
plied with the wax.

.

Do not use a wax containing any
abrasives, cutting compounds or clea-
ners that may damage the vehicle
finish.

Machine compound or aggressive polish-
ing on a base coat/clear coat paint finish
may dull the finish or leave swirl marks.

REMOVING SPOTS

Remove tar and oil spots, industrial dust,
insects, and tree sap as quickly as possi-
ble from the paint surface to avoid lasting
damage or staining. Special cleaning
products are available at a NISSAN dealer
or any automotive accessory stores. It is
recommended that you visit a NISSAN
dealer for these products.

UNDERBODY

In areas where road salt is used in winter,
the underbody must be cleaned regularly.
This will prevent dirt and salt from build-
ing up and causing the acceleration of
corrosion on the underbody and suspen-
sion. Before the winter period and again
in the spring, the underseal must be
checked and, if necessary, re-treated.

GLASS

Use glass cleaner to remove smoke and
dust film from the glass surfaces. It is
normal for glass to become coated with a
film after the vehicle is parked in the hot
sun. Glass cleaner and a soft cloth will
easily remove this film.

CAUTION

When cleaning the inside of the
windows, do not use sharp-edged
tools, abrasive cleaners or chlorine-
based disinfectant cleaners. They
could damage the electrical conduc-
tors or rear window defroster ele-
ments.

WHEELS

Wash the wheels when washing the
vehicle to maintain their appearance.

.

Clean the inner side of the wheels
when the wheel is changed or the
underside of the vehicle is washed.

.

Inspect wheel rims regularly for dents
or corrosion. Such damage may cause
loss of pressure or poor seal at the tire
bead.

.

NISSAN recommends that the road
wheels be waxed to protect against
road salt in areas where it is used
during winter.

CAUTION

Do not use abrasive cleaners when
washing the wheels.

Appearance and care

7-3

-------------------------------------------------------------------------------------------------------------------------------------------------------------

7-4

Appearance and care

ALUMINUM ALLOY WHEELS

Wash regularly with a sponge dampened
in a mild soap solution, especially during
winter months in areas where road salt is
used. Salt could discolor the wheels if not
removed.

CAUTION

Follow the directions below to avoid
staining or discoloring the wheels:

.

Do not use a cleaner that uses
strong acid or alkali contents to
clean the wheels.

.

Do not apply wheel cleaners to
the wheels when they are hot.
The wheel temperature should be
the same as ambient tempera-
ture.

.

Rinse the wheel to completely
remove the cleaner within 15
minutes after the cleaner is ap-
plied.

CHROME PARTS

Clean chrome parts regularly with a non-
abrasive chrome polish to maintain the
finish.

TIRE DRESSING

NISSAN does not recommend the use of
tire dressings. Tire manufacturers apply a
coating to the tires to help reduce dis-
coloration of the rubber. If a tire dressing
is applied to the tires, it may react with
the coating and form a compound. This
compound may come off the tire while
driving and stain the vehicle paint.

If you choose to use a tire dressing, take
the following precautions:

.

Use a water-based tire dressing. The
coating on the tire dissolves more
easily with an oil-based tire dressing.

.

Apply a light coat of tire dressing to
help prevent it from entering the tire
tread/grooves (where it would be
difficult to remove).

.

Wipe off excess tire dressing using a
dry towel. Make sure the tire dressing
is completely removed from the tire
tread/grooves.

.

Allow the tire dressing to dry as
recommended by tire dressing manu-
facturer.

Occasionally remove loose dust from the
interior trim, plastic parts and seats using
a vacuum cleaner or soft bristled brush.
Wipe the vinyl and leather surfaces with a
clean, soft cloth dampened in mild soap
solution, then wipe clean with a dry soft
cloth.

Regular care and cleaning is required in
order to maintain the appearance of the
leather (if so equipped).

Before using any fabric protector, read
the manufacturer’s recommendations.
Some fabric protectors contain chemicals
that may stain or bleach the seat materi-
al.

Use a cloth dampened only with water, to
clean the meter and gauge lens.

WARNING

Do not use water or acidic cleaners
(hot steam cleaners) on the seat. This
can damage the seat or occupant
classification sensors. This can also
affect the operation of the air bag
system and result in serious perso-
nal injury.

CLEANING INTERIOR

-------------------------------------------------------------------------------------------------------------------------------------------------------------

CAUTION

.

Never use benzine, thinner, or any
similar material.

.

For cleaning, use a soft cloth,
dampened with water. Never use
a rough cloth, alcohol, benzine,
thinner or any kind of solvent or
paper towel with a chemical
cleaning agent. They will scratch
or cause discoloration to the lens.

.

Do not spray any liquid such as
water on the meter lens. Spraying
liquid may cause the system to
malfunction.

.

Small dirt particles can be abra-
sive and damaging to the leather
surfaces and should be removed
promptly. Do not use saddle soap,
car waxes, polishes, oils, cleaning
fluids, solvents, detergents or
ammonia-based cleaners as they
may damage the leather’s natural
finish.

.

Never use fabric protectors un-
less recommended by the manu-
facturer.

.

Do not use glass or plastic cleaner
on meter or gauge lens covers. It
may damage the lens cover.

.

Do not spill on or make contact
with interior surfaces while hand-
ling air fresheners, aroma agents,
cosmetics, sunscreen, etc. They
may cause permanent discolora-
tion, stain, crack, paint peeling,
etc. depending on the ingredi-
ents. If they contact the interior
surface, wipe them off immedi-
ately using a soft cloth.

.

Do not use the chlorine-based
cleaning liquid such as chlorine
dioxide and hypochlorous acid,
which may cause the paint peel-
ing, corrosion, etc. If it is unavoid-
able to clean or sterilize interior
surfaces, use less than 75% etha-
nol. Wipe the interior parts with a
dry cloth dampened with ethanol.
Wipe off ethanol completely. If
you leave it uncleaned, it may
cause paint peeling, discolora-
tion, etc. Since ethanol is flam-
mable, be careful of fire.

AIR FRESHENERS

Most air fresheners use a solvent that
could affect the vehicle interior. If you use
an air freshener, take the following pre-
cautions:

.

Hanging-type air fresheners can
cause permanent discoloration when
they contact vehicle interior surfaces.
Place the air freshener in a location
that allows it to hang free and not
contact an interior surface.

.

Liquid-type air fresheners typically clip
on the vents. These products can
cause immediate damage and disco-
loration when spilled on interior sur-
faces.

Carefully read and follow the manufac-
turer’s instructions before using air fresh-
eners.

FLOOR MATS

WARNING

To avoid potential pedal interference
that may result in a collision, injury
or death:

.

NEVER place a floor mat on top of
another floor mat in the driver
front position or install them up-
side down or backwards.

Appearance and care

7-5

-------------------------------------------------------------------------------------------------------------------------------------------------------------

7-6

Appearance and care

.

It is recommended that you use
only genuine NISSAN floor mats
specifically designed for use in
your vehicle model and model
year.

.

Properly position the mats in the
floorwell using the floor mat po-
sitioning hooks. See “Floor mat
installation” (P.7-6).

.

Make sure the floor mat does not
interfere with pedal operation.

.

Periodically check the floor mats
to make sure they are properly
installed.

.

After cleaning the vehicle interior,
check the floor mats to make
sure they are properly installed.

The use of genuine NISSAN floor mats can
extend the life of your vehicle carpet and
make it easier to clean the interior. Mats
should be maintained with regular clean-
ing and replaced if they become exces-
sively worn.

JVA0032X

Floor mat installation

Your vehicle is equipped with floor mat
positioning hook(s). The number and
shape of the floor mat positioning hook
(s) for each seating position varies de-
pending on the vehicle.

When installing genuine NISSAN floor
mats, follow the installation instructions
provided with the floor mat and the
following:

1.

Position the floor mat in the floorwell
so that the floor mat grommet holes
are aligned with the hook(s).

2.

Push the grommet holes into the hook
(s) and secure them. Ensure that the

floor mat is properly positioned.

3. Make sure the floor mat does not

interfere with pedal operation. With
the ignition in the OFF position and
the shift position in the P (Park)
position, fully apply and release all
pedals. The floor mat must not inter-
fere with pedal operation or prevent
the pedal from returning to its normal
position. It is recommended you see a
NISSAN dealer for details about instal-
ling the floor mats in your vehicle.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

JVA0031X

Positioning hook(s)

The illustration shows the location of the
floor mat positioning hook(s).

SEAT BELTS

The seat belts can be cleaned by wiping
them with a sponge dampened in a mild
soap solution. Allow the belts to dry
completely in the shade before using
them.

See “Seat belts” (P.1-15).

WARNING

Do not allow wet seat belts to roll up
in the retractor. NEVER use bleach,

dye, or chemical solvents to clean
the seat belts, since these materials
may severely weaken the seat belt
webbing.

CLEANING THE SEAT TRACKS

CAUTION

Periodically clean the seat tracks to
prevent reduction of ability to move
the seats.

Clean periodically with a high-powered
vacuum cleaner. Dirt and debris may
reduce the ability to adjust the seat. A
wet cleansing agent may be used if
necessary.

MOST COMMON FACTORS CON-
TRIBUTING TO VEHICLE CORRO-
SION

.

The accumulation of moisture-retain-
ing dirt and debris in body panel
sections, cavities, and other areas.

.

Damage to paint and other protective
coatings caused by gravel and stone
chips or minor traffic accidents.

ENVIRONMENTAL FACTORS INFLU-
ENCE THE RATE OF CORROSION

Moisture

Accumulation of sand, dirt and water on
the vehicle body underside can acceler-
ate corrosion. Wet floor coverings will not
dry completely inside the vehicle, and
should be removed for drying to avoid
floor panel corrosion.

Relative humidity

Corrosion will be accelerated in areas of
high relative humidity, especially those
areas where the temperatures stay above
freezing where atmospheric pollution ex-
ists, or where road salt is used.

Appearance and care

7-7

CORROSION PROTECTION

-------------------------------------------------------------------------------------------------------------------------------------------------------------

7-8

Appearance and care

Temperature

A temperature increase will accelerate
the rate of corrosion to those parts which
are not well ventilated.

Air pollution

Industrial pollution, the presence of salt in
the air in coastal areas, or heavy road salt
use will accelerate the corrosion process.
Road salt will also accelerate the disin-
tegration of paint surfaces.

TO PROTECT YOUR VEHICLE FROM
CORROSION

.

Wash and wax your vehicle often to
keep the vehicle clean.

.

Always check for minor damage to the
paint and repair it as soon as possible.

.

Keep drain holes at the bottom of the
doors open to avoid water accumula-
tion.

.

Check the underbody for accumula-
tion of sand, dirt or salt. If present,
wash with water as soon as possible.

CAUTION

.

NEVER remove dirt, sand or other
debris from the passenger com-
partment by washing it out with a
hose. Remove dirt with a vacuum

cleaner.

.

Never allow water or other liquids
to come in contact with electronic
components inside the vehicle as
this may damage them.

Chemicals used for road surface deicing
are extremely corrosive. They accelerate
corrosion and deterioration of underbody
components such as the exhaust system,
fuel and brake lines, brake cables, floor
pan and fenders.

In winter, the underbody must be
cleaned periodically.

For additional protection against rust and
corrosion, which may be required in some
areas, it is recommended you consult a
NISSAN dealer.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

8 Do-it-yourself

Maintenance precautions ...................................................... 8-2
Engine compartment check locations ........................ 8-3

PR25DD engine model ...................................................... 8-3
KR15DDT engine model ................................................... 8-4

Engine cooling system ............................................................. 8-5

Checking engine coolant level .................................... 8-6
Changing engine coolant ................................................ 8-6

Intercooler cooling system (if so equipped) ........... 8-7

Checking intercooler coolant level .......................... 8-8
Changing intercooler coolant ...................................... 8-8

Engine oil ............................................................................................. 8-8

Checking engine oil level ................................................. 8-8
Changing engine oil and filter ..................................... 8-9

Continuously Variable Transmission

(CVT) fluid ......................................................................................... 8-12
Brake fluid ....................................................................................... 8-13
Window washer fluid .............................................................. 8-13
Battery ................................................................................................ 8-15

Jump starting......................................................................... 8-16

Variable voltage control system ................................... 8-17
Drive belt .......................................................................................... 8-17
Spark plugs ..................................................................................... 8-19

Replacing spark plugs ..................................................... 8-19

Air cleaner ....................................................................................... 8-20
Windshield wiper blades ..................................................... 8-21

Cleaning ................................................................................... 8-21
Replacing ................................................................................ 8-21

Rear window wiper blade .................................................. 8-22
Brakes ................................................................................................ 8-22

Self-adjusting brakes ..................................................... 8-22
Brake pad wear warning............................................ 8-22

Fuses ................................................................................................... 8-23

Engine compartment .................................................... 8-23
Passenger compartment ........................................... 8-24

Intelligent Key battery replacement .......................... 8-25
Lights .................................................................................................. 8-28

Headlights .............................................................................. 8-29
Exterior and interior lights ........................................ 8-29

Wheels and tires ........................................................................ 8-30

Tire pressure ........................................................................ 8-30
Tire labeling .......................................................................... 8-34
Types of tires ....................................................................... 8-37
Tire chains .............................................................................. 8-38
Changing wheels and tires ...................................... 8-39

-------------------------------------------------------------------------------------------------------------------------------------------------------------

8-2

Do-it-yourself

When performing any inspection or main-
tenance work on your vehicle, always
take care to prevent serious accidental
injury to yourself or damage to the
vehicle. The following are general precau-
tions which should be closely observed.

WARNING

.

Park the vehicle on a level sur-
face, apply the parking brake
securely and block the wheels to
prevent the vehicle from moving.
Push the park button to shift to
the P (Park) position.

.

Be sure the ignition switch is in
the OFF position when perform-
ing any parts replacement or
repairs.

.

If you must work with the engine
running, keep your hands, cloth-
ing, hair and tools away from
moving fans, belts and any other
moving parts.

.

It is advisable to secure or re-
move any loose clothing and
remove any jewelry, such as
rings, watches, etc. before work-
ing on your vehicle.

.

Always wear eye protection
whenever you work on your ve-
hicle.

.

If you must run the engine in an
enclosed space such as a garage,
be sure there is proper ventilation
for exhaust gases to escape.

.

Never get under the vehicle while
it is supported only by a jack. If it
is necessary to work under the
vehicle, support it with safety
stands.

.

Because the fuel lines are under
high pressure even when the
engine is off, it is recommended
you visit a NISSAN dealer for
service of the fuel filter or fuel
lines.

.

Keep smoking materials, flame
and sparks away from fuel and
the battery.

.

On gasoline engine models with
the Multiport Fuel Injection (MFI)
system, the fuel filter and fuel
lines should be serviced because
the fuel lines are under high
pressure even when the engine
is turned off. It is recommended
that you visit a NISSAN dealer for
this service.

.

Your vehicle is equipped with an
automatic engine cooling fan. It
may come on at any time without
warning, even if the ignition
switch is in the OFF position and
the engine is not running. To
avoid injury, always disconnect
the negative battery cable before
working near the fan.

CAUTION

.

Do not work under the hood while
the engine is hot. Turn the engine
off and wait until it cools down.

.

Avoid direct contact with used
engine oil and coolant. Impro-
perly disposed engine oil, and
engine coolant and/or other ve-
hicle fluids can damage the en-
vironment. Always conform to
local regulations for disposal of
vehicle fluid.

.

Never leave the engine or the CVT
related component harnesses
disconnected while the ignition
switch is in the ON position.

.

Never connect or disconnect the
battery or any transistorized
component while the ignition

MAINTENANCE PRECAUTIONS

-------------------------------------------------------------------------------------------------------------------------------------------------------------

switch is in the ON position.

This “8. Do-it-yourself” section gives in-
structions regarding only those items
which are relatively easy for an owner to
perform.

A genuine NISSAN Service Manual is also
available. (See “Owner’s manual/service
manual order information” (P.10-34).)

You should be aware that incomplete or
improper servicing may result in operat-
ing difficulties or excessive emissions, and
could affect your warranty coverage.

If in

doubt about any servicing, it is recom-
mended you have it done by a NISSAN
dealer.

WAA0302X

1.

Engine coolant reservoir

2.

Engine oil filler cap

3.

Engine oil dipstick

4.

Brake fluid reservoir

5.

Battery

6.

Fuse/fusible link box

7.

Window washer fluid reservoir

8.

Drive belt

9.

Air cleaner

PR25DD ENGINE MODEL

NOTE:

Your vehicle may not be equipped with
an engine cover.

Do-it-yourself

8-3

ENGINE COMPARTMENT CHECK LOCATIONS

-------------------------------------------------------------------------------------------------------------------------------------------------------------

8-4

Do-it-yourself

WAA0301X

1.

Engine coolant reservoir

2.

Engine oil dipstick

3.

Engine oil filler cap

4.

Brake fluid reservoir

5.

Battery

6.

Fuse/fusible link box

7.

Intercooler coolant reservoir

8.

Window washer fluid reservoir

9.

Drive belt

10.

Air cleaner

KR15DDT ENGINE MODEL

NOTE:

Your vehicle may not be equipped with
an engine cover.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

 

 

 

 

 

Content      ..     27      28      29      30     ..