When washing the vehicle with
high-pressure water, be sure not
to spray it around the camera.
Otherwise, water may enter the
camera unit causing water con-
densation on the lens, a malfunc-
tion, fire or an electric shock.
Do not strike the camera. It is a
precision instrument. Otherwise,
it may malfunction or cause da-
mage resulting in a fire or an
The following are operating limitations
and do not represent a system malfunc-
When the temperature is extremely
high or low, the screen may not clearly
When strong light directly shines on
the camera, objects may not be dis-
Vertical lines may be seen in objects
on the screen. This is due to strong
reflected light from the bumper.
The screen may flicker under fluores-
The colors of objects on the RearView
Monitor may differ somewhat from
the actual color of objects.
Objects on the monitor may not be
clear in a dark environment.
There may be a delay when switching
If dirt, rain or snow accumulates on
the camera, the RearView Monitor
may not display objects clearly. Clean
Do not use wax on the camera lens.
Wipe off any wax with a clean cloth
dampened with a diluted mild clean-
ing agent, then wipe with a dry cloth.
Do not use alcohol, benzine or
thinner to clean the camera. This
will cause discoloration.
Do not damage the camera as the
monitor screen may be adversely
If dirt, rain or snow accumulates on the
, RearView Monitor may not
display objects clearly. Clean the camera
by wiping it with a cloth dampened with a
Center display, heater, air conditioner, audio, phone and voice recognition systems