Nissan Z (2023 year). Manual in english - page 2

 

  Index      Manuals     Nissan Z (2023 year). Manual in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

 

 

 

Content      ..      1      2      3      ..

 

 

 

Nissan Z (2023 year). Manual in english - page 2

 

 

SSS1038

INSTALL (if so equipped)

1. Align the head restraint/headrest

stalks with the holes in the seat. Make

sure that the head restraint/headrest

is facing the correct direction. The

stalk with the adjustment notch

must be installed in the hole with the

lock knob

.

2. Push and hold the lock knob and push

the head restraint/headrest down.

3. Properly adjust the head restraint/

headrest before an occupant uses

the seating position.

SSS0997

ADJUST (if so equipped)

Adjust the head restraint/headrest so the

center is level with the center of your ears.

If your ear position is still higher than the

recommended alignment, place the head

restraint/headrest at the highest posi-

tion.

SSS1035

Raise

To raise the head restraint/headrest, pull

it up.
Make sure the head restraint/headrest is

positioned so the lock knob is engaged in

the notch before riding in that designated

seating position.

Safety — Seats, seat belts and supplemental restraint system

1-7

-------------------------------------------------------------------------------------------------------------------------------------------------------------

1-8

Safety — Seats, seat belts and supplemental restraint system

SSS1036

Lower

To lower, push and hold the lock knob

and push the head restraint/headrest

down.
Make sure the head restraint/headrest is

positioned so the lock knob is engaged in

the notch before riding in that designated

seating position.

SSS0508

FRONT-SEAT ACTIVE HEAD RE-

STRAINTS (if so equipped)

The Active Head Restraint moves forward

utilizing the force that the seatback

receives from the occupant in a rear-end

collision. The movement of the head

restraint helps support the occupant’s

head by reducing its backward move-

ment and helping absorb some of the

forces that may lead to whiplash-type

injuries.
Active Head Restraints are effective for

collisions at low to medium speeds in

which it is said that whiplash injury occurs

most.
Active Head Restraints operate only in

certain rear-end collisions. After the colli-

sion, the head restraints return to their

original positions.
The front head restraints have multiple

adjustment notches.
Properly adjust the Active Head Restraints

as described in this section.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

PRECAUTIONS ON SEAT BELT

USAGE

If you are wearing your seat belt properly

adjusted, and you are sitting upright and

well back in your seat with both feet on

the floor, your chances of being injured or

killed in an accident and/or the severity of

injury may be greatly reduced. NISSAN

strongly encourages you and all of your

passengers to buckle up every time you

drive, even if your seating position in-

cludes a supplemental air bag.

Most U.S. states and Canadian pro-

vinces or territories specify that seat

belts be worn at all times when a

vehicle is being driven.

SSS0136A

SSS0134A

Safety — Seats, seat belts and supplemental restraint system

1-9

SEAT BELTS

-------------------------------------------------------------------------------------------------------------------------------------------------------------

1-10

Safety — Seats, seat belts and supplemental restraint system

SSS0016

SSS0014

WARNING

.

Every person who drives or rides

in this vehicle should use a seat

belt at all times.

.

The seat belt should be properly

adjusted to a snug fit. Failure to

do so may reduce the effective-

ness of the entire restraint sys-

tem and increase the chance or

severity of injury in an accident.

Serious injury or death can occur

if the seat belt is not worn prop-

erly.

.

Always route the shoulder belt

over your shoulder and across

your chest. Never put the belt

behind your back, under your

arm or across your neck. The belt

should be away from your face

and neck, but not falling off your

shoulder.

.

Position the lap belt as low and

snug as possible AROUND THE

HIPS, NOT THE WAIST. A lap belt

worn too high could increase the

risk of internal injuries in an

accident.

.

Be sure the seat belt tongue is

securely fastened to the proper

buckle.

.

Do not wear the seat belt inside

out or twisted. Doing so may

reduce its effectiveness.

.

Do not allow more than one

person to use the same seat belt.

.

Never carry more people in the

vehicle than there are seat belts.

.

If the seat belt warning light

glows continuously while the

ignition is turned ON with all

doors closed and all seat belts

fastened, it may indicate a mal-

function in the system. Have the

system checked. It is recom-

mended you visit a NISSAN dealer

for this service.

.

No changes should be made to

the seat belt system. For exam-

ple, do not modify the seat belt,

add material or install devices

that may change the seat belt

routing or tension. Doing so may

affect the operation of the seat

belt system. Modifying or tam-

pering with the seat belt system

may result in serious personal

injury.

.

Once a seat belt pretensioner has

activated, it cannot be reused and

must be replaced together with

-------------------------------------------------------------------------------------------------------------------------------------------------------------

the retractor. It is recommended

you visit a NISSAN dealer for this

service.

.

All seat belt assemblies, including

retractors and attaching hard-

ware, should be inspected after

any collision. It is recommended

you visit a NISSAN dealer for this

service. NISSAN recommends that

all seat belt assemblies in use

during a collision be replaced

unless the collision was minor

and the belts show no damage

and continue to operate properly.

Seat belt assemblies not in use

during a collision should also be

inspected and replaced if either

damage or improper operation is

noted.

.

All child restraints and attaching

hardware should be inspected

after any collision. Always follow

the restraint manufacturer’s in-

spection instructions and repla-

cement recommendations. The

child restraints should be re-

placed if they are damaged.

JVR0575X

SEAT BELT WARNING LIGHT AND

CHIME

The driver and front passenger seats are

equipped with an enhanced seat belt

reminder function. If your vehicle is

equipped with an enhanced seat belt

reminder function, a visual and audible

alert will operate if a driver or front

passenger seat belt is unbuckled at

speeds of approximately 10 MPH (15

km/h) or more under the following con-

ditions:

.

If the driver seat belt is not fastened.

.

The front passenger’s seat belt is not

fastened and the seat is occupied by a

passenger for 7 seconds after the

ignition switch is placed in the ON

position.

.

The front passenger’s seat belt is not

fastened and objects or external force

on the passenger seat change the

seat belt reminder classification to

“occupied”.

The seat belt warning light will flash

under the conditions shown above until

the necessary seat belt is securely fas-

tened.
A warning chime will sound for approxi-

mately 95 seconds or until one of the

following conditions is met:

.

The unbuckled front passenger’s seat

belt is securely fastened.

.

The seat belt reminder function in the

front passenger seat no longer de-

tects that the front passenger seat is

occupied.

.

The ignition switch is turned off.

The below situations could result in the

seat belt warning light being illuminated

and the chime sounding, even with no

occupant present in the passenger seat:

.

Heavy objects placed on the seat.

.

Someone pushing or pulling on the

front passenger seat.

.

An object placed under the front

passenger seat.

Safety — Seats, seat belts and supplemental restraint system

1-11

-------------------------------------------------------------------------------------------------------------------------------------------------------------

1-12

Safety — Seats, seat belts and supplemental restraint system

.

An object placed between the seat

cushion and center console or be-

tween the seat cushion and the door.

.

An object hanging on the seat or

placed in the seatback pocket (If so

equipped).

.

A child restraint or other object press-

ing against the rear of the seatback.

PREGNANT WOMEN

NISSAN recommends that pregnant wo-

men use seat belts. The seat belt should

be worn snug, and always position the lap

belt as low as possible around the hips,

not the waist, and place the shoulder belt

over your shoulder and across your chest.

Never run the lap/shoulder belt over your

abdominal area. Contact your doctor for

specific recommendations.

INJURED PERSONS

NISSAN recommends that injured persons

use seat belts, depending on the injury.

Check with your doctor for specific re-

commendations.

THREE-POINT TYPE SEAT BELT

WARNING

.

Every person who drives or rides

in this vehicle should use a seat

belt at all times.

.

Do not ride in a moving vehicle

when the seatback is reclined.

This can be dangerous. The

shoulder belt will not be against

your body. In an accident, you

could be thrown into it and re-

ceive neck or other serious inju-

ries. You could also slide under

the lap belt and receive serious

internal injuries.

.

For the most effective protection

when the vehicle is in motion, the

seat should be upright. Always sit

well back and upright in the seat

with both feet on the floor and

adjust the seat belt properly.

.

Do not allow children to play with

the seat belts. Most seating posi-

tions are equipped with Auto-

matic Locking Retractor (ALR)

mode seat belts. If the seat belt

becomes wrapped around a

child’s neck with the ALR mode

activated, the child can be ser-

iously injured or killed if the seat

belt retracts and becomes tight.

This can occur even if the vehicle

is parked. Unbuckle the seat belt

to release the child. If the seat

belt can not be unbuckled or is

already unbuckled, release the

child by cutting the seat belt with

a suitable tool (such as a knife or

scissors) to release the seat belt.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

SSS0292

Fastening the seat belts

1. Adjust the seat. (See “Seats” (P.1-2).)
2. Slowly pull the seat belt out of the

retractor and insert the tongue into

the buckle until you hear and feel the

latch engage.

.

The retractor is designed to lock

during a sudden stop or on im-

pact. A slow pulling motion per-

mits the belt to move, and allows

you some freedom of movement

in the seat.

.

If the seat belt cannot be pulled

from its fully retracted position,

firmly pull the belt and release it.

Then smoothly pull the belt out of

the retractor.

SSS0290

3. Position the lap belt portion

low and

snug on the hips

as shown.

4. Pull the shoulder belt portion toward

the retractor to take up extra slack. Be

sure the shoulder belt is routed over

your shoulder and across your chest.

The three-point type seat belts have two

modes of operation:

.

Emergency Locking Retractor (ELR)

.

Automatic Locking Retractor (ALR)

The Emergency Locking Retractor (ELR)

mode allows the seat belt to extend and

retract to allow the driver and passengers

some freedom of movement in the seat.

The ELR locks the seat belt when the

vehicle slows down rapidly or during

Safety — Seats, seat belts and supplemental restraint system

1-13

-------------------------------------------------------------------------------------------------------------------------------------------------------------

1-14

Safety — Seats, seat belts and supplemental restraint system

impacts.
The Automatic Locking Retractor (ALR)

mode (child restraint mode) locks the

seat belt for child restraint installation.
Pull the seat belt out until it is fully

extended to activate the ALR mode.

Detach the seat belt tongue from the

buckle and retract the seat belt comple-

tely to cancel the ALR mode and revert

back to the ELR mode.
When the ALR mode is activated the seat

belt cannot be extended again until the

seat belt tongue is detached from the

buckle and fully retracted. For additional

information, see “Child restraints” (P.1-18).

The ALR mode should be used only for

child restraint installation. During nor-

mal seat belt use by an occupant, the

ALR mode should not be activated. If it

is activated it may cause uncomfortable

seat belt tension.

WARNING

When fastening the seat belts, be

certain that seatbacks are comple-

tely secured in the latched position.

If they are not completely secured,

passengers may be injured in an

accident or sudden stop.

SSS0326

Unfastening the seat belts

To unfasten the seat belt, push the

button on the buckle. The seat belt

automatically retracts.

Checking seat belt operation

Seat belt retractors are designed to lock

seat belt movement by two separate

methods:

.

When the belt is pulled quickly from

the retractor.

.

When the vehicle slows down rapidly.

To increase your confidence in the seat

belts, check the operation as follows:

.

Grasp the shoulder belt and pull for-

ward quickly. The retractor should

lock and restrict further belt move-

ment.

If the retractor does not lock during this

check, get the system checked. It is

recommended you visit a NISSAN dealer

for this service, or to learn more about

seat belt operation.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

SSS0588

Shoulder belt arm

Before fastening the seat belt, pull the

shoulder belt arm forward until it clicks at

the detent position.
Pulling the arm forward will allow an easy

access to the belt.

SEAT BELT EXTENDERS

If, because of body size or driving position,

it is not possible to properly fit the lap-

shoulder belt and fasten it, an extender

that is compatible with the installed seat

belts is available that can be purchased.

The extender adds approximately 8 in

(200 mm) of length and may be used for

either the driver or front passenger seat-

ing position. It is recommended you visit a

NISSAN dealer for assistance with pur-

chasing an extender if an extender is

required.

WARNING

.

It is recommended that only

NISSAN seat belt extenders, made

by the same company which

made the original equipment seat

belts, be used with the NISSAN

seat belts.

.

Adults and children who can use

the standard seat belt should not

use an extender. Such unneces-

sary use could result in serious

personal injury in the event of an

accident.

.

Never use seat belt extenders to

install child restraints. If the child

restraint is not secured properly,

the child could be seriously in-

jured or killed in a collision or a

sudden stop.

SEAT BELT MAINTENANCE

.

To clean the seat belt webbings,

apply a mild soap solution or any

solution recommended for cleaning

upholstery or carpets. Then, wipe with

a cloth and allow the seat belts to dry

in the shade. Do not allow the seat

belts to retract until they are comple-

tely dry.

.

If dirt builds up in the shoulder belt

guide

of the seat belt anchors, the

seat belts may retract slowly. Wipe the

shoulder belt guide with a clean, dry

cloth.

.

Periodically check to see that the

seat belt and the metal components

such as buckles, tongues, retractors,

flexible wires and anchors work prop-

erly. If loose parts, deterioration, cuts

or other damage on the webbing is

found, the entire seat belt assembly

should be replaced.

Safety — Seats, seat belts and supplemental restraint system

1-15

-------------------------------------------------------------------------------------------------------------------------------------------------------------

1-16

Safety — Seats, seat belts and supplemental restraint system

WARNING

Do not allow children to play with the

seat belts. Most seating positions are

equipped with Automatic Locking

Retractor (ALR) mode seat belts. If

the seat belt becomes wrapped

around a child’s neck with the ALR

mode activated, the child can be

seriously injured or killed if the seat

belt retracts and becomes tight. This

can occur even if the vehicle is

parked. Unbuckle the seat belt to

release the child. If the seat belt can

not be unbuckled or is already un-

buckled, release the child by cutting

the seat belt with a suitable tool

(such as a knife or scissors) to

release the seat belt.

Children need adults to help protect

them. They need to be properly re-

strained.

In addition to the general information in

this manual, child safety information is

available from many other sources, in-

cluding doctors, teachers, government

traffic safety offices, and community or-

ganizations. Every child is different, so be

sure to learn the best way to transport

your child.

There are three basic types of child

restraint systems:

.

Rear-facing child restraint

.

Front-facing child restraint

.

Booster seat

The proper restraint depends on the

child’s size. Generally, infants (up to about

1 year and less than 20 lb (9 kg)) should be

placed in rear-facing child restraints.

Front-facing child restraints are available

for children who outgrow rear-facing

child restraints and are at least 1 year

old. Booster seats are used to help

position a vehicle lap/shoulder belt on a

child who can no longer use a front-

facing child restraint.

WARNING

Infants and children need special

protection. The vehicle’s seat belts

may not fit them properly. The

shoulder belt may come too close

to the face or neck. The lap belt may

not fit over their small hip bones. In

an accident, an improperly fitting

seat belt could cause serious or fatal

injury. Always use appropriate child

restraints.

All U.S. states and Canadian provinces or

territories require the use of approved

child restraints for infants and small

children. (See “Child restraints” (P.1-18).)
Also, there are other types of child

restraints available for larger children for

additional protection.

INFANTS

Infants up to at least 1 year old should be

placed in a rear-facing child restraint.

NISSAN recommends that infants be

placed in child restraints that comply with

Federal Motor Vehicle Safety Standards

or Canadian Motor Vehicle Safety Stan-

dards. You should choose a child restraint

that fits your vehicle and always follow

the manufacturer’s instructions for instal-

lation and use.

SMALL CHILDREN

Children that are over 1 year old and

weigh at least 20 lb (9 kg) should remain

in a rear-facing child restraint as long as

possible up to the height or weight limit

of the child restraint. Children who out-

grow the height or weight limit of the

rear-facing child restraint and are at least

1 year old should be secured in a forward-

facing child restraint with a harness. Refer

to the manufacturer’s instructions for

minimum and maximum weight and

height recommendations. NISSAN recom-

mends that small children be placed in

CHILD SAFETY

-------------------------------------------------------------------------------------------------------------------------------------------------------------

child restraints that comply with Federal

Motor Vehicle Safety Standards or Cana-

dian Motor Vehicle Safety Standards. You

should choose a child restraint that fits

your vehicle and always follow the man-

ufacturer’s instructions for installation

and use.

LARGER CHILDREN

Children should remain in a forward-

facing child restraint with a harness until

they reach the maximum height or

weight limit allowed by the child restraint

manufacturer.
Once a child outgrows the height or

weight limit of the harness-equipped

forward-facing child restraint, NISSAN

recommends that the child be placed in

a commercially available booster seat to

obtain proper seat belt fit. For a seat belt

to fit properly, the booster seat should

raise the child so that the shoulder belt is

properly positioned across the chest and

the top, middle portion of the shoulder.

The shoulder belt should not cross the

neck or face and should not fall off the

shoulder. The lap belt should lie snugly

across the lower hips or upper thighs, not

the abdomen.
A booster seat can only be used in

seating positions that have a three-point

type seat belt. The booster seat should fit

the vehicle seat and have a label certify-

ing that it complies with Federal Motor

Vehicle Safety Standards or Canadian

Motor Vehicle Safety Standards.
A booster seat should be used until the

child can pass the seat belt fit test below:

.

Are the child’s back and hips against

the vehicle seatback?

.

Is the child able to sit without slouch-

ing?

.

Do the child’s knees bend easily over

the front edge of the seat with feet flat

on the floor?

.

Can the child safely wear the seat belt

(lap belt low and snug across the hips

and shoulder belt across mid-chest

and shoulder)?

.

Is the child able to use the properly

adjusted head restraint/headrest?

.

Will the child be able to stay in position

for the entire ride?

JVR0473X

If you answered no to any of these

questions, the child should remain in a

booster seat using a three-point type

seat belt.

NOTE:
Laws in some communities may follow

different guidelines. Check local and

state regulations to confirm your child

is using the correct restraint system

before traveling.

WARNING

Never let a child stand or kneel on

any seat and do not allow a child in

the cargo area. The child could be

Safety — Seats, seat belts and supplemental restraint system

1-17

-------------------------------------------------------------------------------------------------------------------------------------------------------------

1-18

Safety — Seats, seat belts and supplemental restraint system

seriously injured or killed in a sudden

stop or collision.

SSS0099

SSS0100

PRECAUTIONS ON CHILD RE-

STRAINTS

WARNING

.

Failure to follow the warnings

and instructions for proper use

and installation of child restraints

could result in serious injury or

death of a child or other passen-

gers in a sudden stop or collision:
— The child restraint must be

used and installed properly.

Always follow all of the child

restraint manufacturer’s in-

structions for installation and

use.

— Infants and children should

never be held on anyone’s

lap. Even the strongest adult

cannot resist the forces of a

collision.

— Do not put a seat belt around

both a child and another pas-

senger.

— Even with the NISSAN Ad-

vanced Air Bag System, never

install a rear-facing child re-

straint in the front seat. An

inflating air bag could ser-

CHILD RESTRAINTS

-------------------------------------------------------------------------------------------------------------------------------------------------------------

iously injure or kill a child.

— Be sure to purchase a child

restraint that will fit the child

and vehicle. Some child re-

straints may not fit properly

in your vehicle.

— Child restraint anchor points

are designed to withstand

loads from child restraints

that are properly fitted.

— Never use the anchor points

for adult seat belts or har-

nesses.

— Keep seatbacks as upright as

possible after fitting the child

restraint.

— Infants and children should

always be placed in an appro-

priate child restraint while in

the vehicle.

.

When the child restraint is not in

use, keep it secured with a seat

belt. In a sudden stop or collision,

loose objects can injure occu-

pants or damage the vehicle.

CAUTION

A child restraint in a closed vehicle

can become very hot. Check the

seating surface and buckles before

placing a child in the child restraint.

In general, child restraints are designed to

be installed with the lap portion of a lap/

shoulder seat belt.
Several manufacturers offer child re-

straints for children of various sizes. When

selecting any child restraint, keep the

following points in mind:

.

Choose only a restraint with a label

certifying that it complies with Federal

Motor Vehicle Safety Standard 213 or

Canadian Motor Vehicle Safety Stan-

dard 213.

.

Check the child restraint in your

vehicle to be sure it is compatible with

the vehicle’s seat and seat belt sys-

tem.

.

If the child restraint is compatible with

your vehicle, place your child in the

child restraint and check the various

adjustments to be sure the child

restraint is compatible with your child.

Choose a child restraint that is de-

signed for your child’s height and

weight. Always follow all recom-

mended procedures.

The passenger seat is not suitable for use

with a rear-facing child restraint for

infants. Therefore, infants should not be

transported in this vehicle.

All U.S. states and Canadian provinces

or territories require that infants and

small children be restrained in an ap-

proved child restraint at all times while

the vehicle is being operated. Canadian

law requires the top tether strap on

front-facing child restraints to be se-

cured to the designated anchor point

on the vehicle.

TOP TETHER STRAP CHILD RE-

STRAINT

If the manufacturer of your child restraint

requires the use of a top tether strap, it

must be secured to an anchor point.

WARNING

.

Child restraint anchorages are

designed to withstand only those

loads imposed by correctly fitted

child restraints. Under no circum-

stances are they to be used for

adult seat belts, harnesses or for

attaching other items or equip-

ment to the vehicle. Doing so

Safety — Seats, seat belts and supplemental restraint system

1-19

-------------------------------------------------------------------------------------------------------------------------------------------------------------

1-20

Safety — Seats, seat belts and supplemental restraint system

could damage the child restraint

anchorages. The child restraint

will not be properly installed

using the damaged anchorage,

and a child could be seriously

injured or killed in a collision.

.

If the cargo cover (if so equipped)

contacts the top tether strap

when it is attached to the top

tether anchor, remove the cargo

cover from the vehicle or secure it

on the cargo floor below its at-

tachment location. If the cargo

cover is not removed, it may

damage the top tether strap dur-

ing a collision. Your child could be

seriously injured or killed in a

collision if the child restraint top

tether strap is damaged.

.

Do not allow cargo to contact the

top tether strap when it is at-

tached to the top tether anchor.

Properly secure the cargo so it

does not contact the top tether

strap. Cargo that is not properly

secured or cargo that contacts

the top tether strap may damage

the top tether strap during a

collision. Your child could be ser-

iously injured or killed in a colli-

sion if the child restraint top

tether strap is damaged.

SSS0929

Top tether anchor point location

The anchor point is located on the floor of

the cargo area.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

SSS0100

FORWARD-FACING CHILD RE-

STRAINT INSTALLATION USING THE

SEAT BELTS

WARNING

The three-point seat belt with Auto-

matic Locking Retractor (ALR) must

be used when installing a child re-

straint. Failure to use the ALR mode

will result in the child restraint not

being properly secured. The restraint

could tip over or be loose and cause

injury to a child in a sudden stop or

collision. Also, it can change the

operation of the front passenger air

bag. See “Front passenger air bag

and status light” (P.1-35).

SSS0640

Front-facing (front passenger seat) — step 1

Refer to all Warnings and Cautions in the

“Child safety” and “Child restraints” sec-

tions before installing a child restraint.
Follow these steps to install a front-facing

child restraint using the vehicle seat belt

in the front passenger seat:
1.

If you must install a child restraint in

the front seat, it should be placed in

a front-facing direction only. Move

the seat to the rearmost position.

Child restraints for infants must be

used in the rear-facing direction and

therefore must not be used in the

front seat.

Safety — Seats, seat belts and supplemental restraint system

1-21

-------------------------------------------------------------------------------------------------------------------------------------------------------------

1-22

Safety — Seats, seat belts and supplemental restraint system

2. Position the child restraint on the seat.

Always follow the child restraint man-

ufacturer’s instructions.
The back of the child restraint should

be secured against the vehicle seat-

back.
If necessary, adjust or remove the

head restraint/headrest to obtain the

correct child restraint fit. If the head

restraint/headrest is removed, store it

in a secure place.

Be sure to reinstall

the head restraint/headrest when

the child restraint is removed.

See

“Head restraints/headrests” (P.1-5) for

head restraint adjustment, removal

and installation information.
If the seating position does not have

an adjustable head restraint/headrest

and it is interfering with the proper

child restraint fit, try a different child

restraint.

SSS0360B

Front-facing — step 3

3. Route the seat belt tongue through

the child restraint and insert it into the

buckle until you hear and feel the

latch engage. Be sure to follow the

child restraint manufacturer’s instruc-

tions for belt routing.
If the child restraint is equipped with a

top tether strap, route the top tether

strap and secure the tether strap to

the tether anchor point. See “Installing

top tether strap” (P.1-24).

SSS0651

Front-facing — step 4

4. Pull the shoulder belt until the belt is

fully extended. At this time, the seat

belt retractor is in the Automatic

Locking Retractor (ALR) mode (child

restraint mode). It reverts to Emer-

gency Locking Retractor (ELR) mode

when the seat belt is fully retracted.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

 

 

 

 

 

Content      ..      1      2      3      ..