Nissan Armada (2022 year). Manual in english - page 21

 

  Index      Manuals     Nissan Armada (2022 year). Manual in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

 

 

 

Content      ..     19      20      21      22     ..

 

 

 

Nissan Armada (2022 year). Manual in english - page 21

 

 

5-20

Starting and driving

brake pedal and shift the shift lever from

P (Park) to R (Reverse), N (Neutral), D

(Drive) or Manual shift mode position.
Push the button to shift into P (Park) or R

(Reverse). All other positions can be

selected without pushing the button.

WARNING

Apply the parking brake if the shift

lever is in any position while the

engine is not running. Failure to do

so could cause the vehicle to move

unexpectedly or roll away and result

in serious personal injury or property

damage.

CAUTION

Make sure the vehicle is completely

stopped and the transmission is in

the P (Park) position.

P (Park) position:

Use this position when the vehicle is

parked or when starting the engine. Make

sure the vehicle is completely stopped.

The brake pedal must be depressed and

the shift lever button pushed in to move

the shift lever from the N (Neutral)

position or any drive position to the P

(Park) position.

Apply the parking brake.

When parking on a hill, apply the parking

brake first, then move the shift lever to

the P (Park) position.

CAUTION

Use this position only when the

vehicle is completely stopped.

R (Reverse):

Use this position to back up. Always be

sure the vehicle is completely stopped

before selecting the R (Reverse) position.

The brake pedal must be depressed and

the shift lever button pushed in to move

the shift lever from the P (Park) posi-

tion, the N (Neutral) position or any

drive position to the R (Reverse) posi-

tion.
N (Neutral):

Neither forward nor reverse gear is en-

gaged. The engine can be started in this

position. You may shift to the N (Neutral)

position and restart a stalled engine while

the vehicle is moving.

D (Drive):

Use this position for all normal forward

driving.

Manual shift mode

When the shift lever is in the manual shift

gate, the transmission is ready for the

manual shift mode. Shift ranges can be

selected manually by moving the shift

lever up or down.
When shifting up, move the shift lever to

the + (up) side. The transmission shifts to

the higher range.
When shifting down, move the shift lever

to the − (down) side. The transmission

shifts to the lower range.
When canceling the manual shift mode,

return the shift lever to the D (Drive)

position. The transmission returns to the

normal driving mode.
In the manual shift mode, the shift range

is displayed on the position indicator in

the meter.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Shift ranges up or down one by one as

follows:

M

1

?

/

M

2

?

/

M

3

?

/

M

4

?

/

M

5

?

/

M

6

?

/

M

7

M

7 (7th):

Use this position for all normal forward

driving at highway speeds.

M

6 (6th) and

M

5 (5th):

Use these positions when driving up long

slopes, or for engine braking when driving

down long slopes.

M

4 (4th),

M

3 (3rd) and

M

2 (2nd):

Use these positions for hill climbing or

engine braking on downhill grades.

M

1 (1st):

Use this position when climbing steep

hills slowly or driving slowly through deep

snow, or for maximum engine braking on

steep downhill grades.

.

Remember not to drive at high speeds

for extended periods of time in lower

than 7th gear. This reduces fuel econ-

omy.

.

Moving the shift lever rapidly to the

same side twice will shift the ranges in

succession.

.

In the manual shift mode, the trans-

mission may not shift to the se-

lected gear or may automatically

shift to the other gear. This helps

maintain driving performance and

reduces the chance of vehicle da-

mage or loss of control.

.

When the transmission does not

shift to the selected gear, the Auto-

matic Transmission (AT) position in-

d i c a t o r l i g h t ( i n t h e v e h i c l e

information display) will blink and

the buzzer will sound.

.

In the manual shift mode, the trans-

mission automatically shifts down

to 1st gear before the vehicle comes

to a stop. When accelerating again, it

is necessary to shift up to the

desired range.

Accelerator downshift — In D (Drive)

position —

For passing or hill climbing, fully depress

the accelerator pedal to the floor. This

shifts the transmission down into the

lower gear, depending on the vehicle

speed.

Fail-safe

When the fail-safe operation occurs, note

that the transmission will be locked in any

of the forward gears according to the

condition.

If the vehicle is driven under extreme

conditions, such as excessive wheel

spinning and subsequent hard braking,

the fail-safe system may be activated.

This will occur even if all electrical

circuits are functioning properly. In this

case, push the switch to the OFF posi-

tion and wait for 3 seconds. Then push

the ignition switch back to the ON

position. The vehicle should return to

its normal operating condition. If it does

not return to its normal operating con-

dition, have the transmission checked

and repaired, if necessary. It is recom-

mended you visit a NISSAN dealer for

this service.

Starting and driving

5-21

-------------------------------------------------------------------------------------------------------------------------------------------------------------

5-22

Starting and driving

WAF0756X

Shift lock release

If the battery charge is low or discharged,

the shift lever may not be moved from the

P (Park) position even with the brake

pedal depressed and the shift lever but-

ton pushed.
To move the shift lever, perform the

following procedure:
1. Place the ignition switch in the OFF or

LOCK position.

2. Apply the parking brake.
3. Remove the shift lock cover

using a

suitable tool.

4. Push down the shift lock

as illu-

strated.

5. Push the shift lever button

and

move the shift lever to N (Neutral)

position

while holding down the

shift lock.

The vehicle may be moved to the desired

location.
If the lever cannot be moved out of P

(Park), have the automatic transmission

system checked as soon as possible. It is

recommended you visit a NISSAN dealer

for this service.

WARNING

.

Be sure the parking brake is fully

released before driving. Failure to

do so can cause brake failure and

lead to an accident.

.

Do not release the parking brake

from outside the vehicle.

.

Do not use the gear shift in place

of the parking brake. When park-

ing, be sure the parking brake is

fully engaged.

.

To help avoid risk of injury or

death through unintended opera-

tion of the vehicle and/or its

systems, do not leave children,

people who require the assis-

tance of others or pets unat-

t e n d e d i n y o u r v e h i c l e .

Additionally, the temperature in-

side a closed vehicle on a warm

day can quickly become high

enough to cause a significant risk

of injury or death to people and

pets.

PARKING BRAKE

-------------------------------------------------------------------------------------------------------------------------------------------------------------

SPA2331

To apply:

Fully depress the parking brake

pedal

.

To release:

1. Firmly apply the foot brake

.

2. Depress the parking brake pedal

and the parking brake will be released.

3. Before driving, be sure the brake

warning light goes out.

WAF0734X

The Traffic Sign Recognition (TSR) system

provides the driver with information

about the most recently detected speed

limit. The system captures the road sign

information with the multi-sensing front

camera unit

located on the windshield

above the inside mirror and displays the

detected signs in the vehicle information

display. For vehicles equipped with navi-

gation system, the speed limit displayed is

based on a combination of navigation

system data and live camera recognition.

WARNING

The TSR system is only intended to

be a support device to provide the

driver with information. It is not a

replacement for the driver’s atten-

tion to traffic conditions or respon-

sibility to drive safely. It cannot

prevent accidents due to careless-

ness. It is the driver’s responsibility

to stay alert and drive safely at all

times.

SYSTEM OPERATION

The TSR system displays the following

types of road sign:

Starting and driving

5-23

TRAFFIC SIGN RECOGNITION (TSR)

(if so equipped)

-------------------------------------------------------------------------------------------------------------------------------------------------------------

5-24

Starting and driving

WAF0780X

WAC0215X

Latest detected speed limit

Reduce speed limit caution (orange)
No speed limit information
No passing zone
Reduce speed limit caution (with no

speed limit information) (orange)

CAUTION

.

The TSR system is intended as an

aid to careful driving. It is the

driver’s responsibility to stay

alert, drive safely, and observe

all road regulations that currently

apply, including looking out for

road signs.

.

The TSR system may not function

properly under all conditions. Be-

low are some examples:
— When the road sign is not

clearly visible, for example,

due to damage or weather

conditions.

— When rain, snow or dirt ad-

heres to the windshield in

front of the multi-sensing

front camera unit.

— When the headlights are not

bright due to dirt on the lens

or if the aiming is not adjusted

properly.

— When strong light enters the

camera unit. (For example, the

light directly shines on the

front of the vehicle at sunrise

or sunset.)

— When a sudden change in

brightness occurs. (For exam-

ple, when the vehicle enters or

exits a tunnel or under a

bridge.)

— In areas not covered by the

navigation system.

— If there are deviations in rela-

tion to the navigation, for ex-

ample due to changes in the

road routing.

— When overtaking buses or

trucks with speed stickers.

.

The TSR system may display a

traffic sign, though there is no

traffic sign in front of the vehicle.

It may display a different speed

limit from that for a passenger

vehicle. (The maximum speed

limit sign may show a higher or

lower number than the actual

maximum speed, for example,

when detecting a speed limit sign

for truck, advisory sign, different

speed limit sign between daytime

-------------------------------------------------------------------------------------------------------------------------------------------------------------

and nighttime, or speed limit sign

written in different unit near the

border, etc.)

WAF0718X

Steering-wheel-mounted controls (left

side)
Vehicle information display

HOW TO ENABLE/DISABLE THE TSR

SYSTEM

Perform the following steps to enable or

disable the TSR system:
1. Push the

button until “Set-

tings” appears in the vehicle informa-

tion display and then push the OK. Use

Starting and driving

5-25

-------------------------------------------------------------------------------------------------------------------------------------------------------------

5-26

Starting and driving

the

button to select “Driver Assis-

tance”. Then push the OK.

2. Select “Speed Limit Sign” and push the

OK to turn the system on or off.

SYSTEM TEMPORARILY UNAVAIL-

ABLE

If the vehicle is parked in direct sunlight

under high temperature conditions (over

approximately 104°F (40°C) and then

started, the TSR system may be deacti-

vated automatically. The “Unavailable

High Cabin Temperature” warning mes-

sage will appear in the vehicle informa-

tion display.

Action to take:

When the interior temperature is reduced,

the TSR system will resume operating

automatically.

SYSTEM MALFUNCTION

If the TSR system malfunctions it will be

turned off automatically and the TSR

“Malfunction See Owner’s Manual” warn-

ing message will appear in the vehicle

information display.

Action to take

If the warning message appears, pull off

the road at a safe location and stop the

vehicle. Turn the engine off and restart

the engine. If the warning message con-

tinues to appear, have the system

checked by a NISSAN dealer.

SYSTEM MAINTENANCE

The TSR system uses the same multi-

sensing front camera unit that is used by

the Lane Departure Warning (LDW) sys-

tem, located above the inside mirror. (See

“System maintenance” (P.5-31).)

WARNING

Failure to follow the warnings and

instructions for proper use of the

LDW system could result in serious

injury or death.

.

This system is only a warning

device to inform the driver of a

potential unintended lane depar-

ture. It will not steer the vehicle or

prevent loss of control. It is the

driver’s responsibility to stay

alert, drive safely, keep the vehi-

cle in the traveling lane, and be in

control of the vehicle at all times.

LANE DEPARTURE WARNING (LDW)

-------------------------------------------------------------------------------------------------------------------------------------------------------------

WAF0734X

The LDW system will operate when the

vehicle is driven at speeds of approxi-

mately 37 MPH (60 km/h) and above, and

the lane markings are clearly visible on

the road.
The LDW system monitors the lane mar-

kers on the traveling lane using the

camera unit

located above the inside

mirror.
The LDW system warns the driver that the

vehicle is beginning to leave the driving

lane with an indicator and a steering

wheel vibration. (See “LDW system opera-

tion” (P.5-27).)

WAF0730X

LDW indicator (on the vehicle information

display)
Vehicle information display
Steering-wheel-mounted controls (left

side)
Warning systems switch

LDW SYSTEM OPERATION

The LDW system provides a lane depar-

ture warning function when the vehicle is

driven at speeds of approximately 37 MPH

(60 km/h) and above and the lane mark-

ings are clear. When the vehicle ap-

proaches either the left or the right side

Starting and driving

5-27

-------------------------------------------------------------------------------------------------------------------------------------------------------------

5-28

Starting and driving

of the traveling lane, the steering wheel

will vibrate and the LDW indicator on the

vehicle information display will blink to

alert the driver.
The warning function will stop when the

vehicle returns inside of the lane markers.

WAF0731X

Steering-wheel-mounted controls (left

side)
Vehicle information display
Warning systems switch
Warning systems ON indicator light

HOW TO ENABLE/DISABLE THE LDW

SYSTEM

Perform the following steps to enable or

disable the LDW system.
1. Push the

button until “Set-

tings” appears in the vehicle informa-

tion display and then push the

-------------------------------------------------------------------------------------------------------------------------------------------------------------

button. Use the OK to select “Driver

Assistance”. Then push the OK.

2. Select “Lane” and push the OK.
3. Select “Warning (LDW)” and push the

OK.

The warning systems switch

is used to

turn on and off the LDW system when it is

activated on the vehicle information dis-

play. When the warning systems switch

is turned off, the warning systems ON

indicator light

on the switch is off.

The warning systems switch

will turn

on and off the LDW and BSW systems at

the same time.

NOTE:
If you disable the LDW system, the

system will remain disabled the next

time you start the vehicle’s engine.

LDW SYSTEM LIMITATIONS

WARNING

Listed below are the system limita-

tions for the LDW system. Failure to

follow the warnings and instructions

for proper use of the LDW system

could result in serious injury or

death.

.

The system will not operate at

speeds below approximately 37

MPH (60 km/h) or if it cannot

detect lane markers.

.

Do not use the LDW system under

the following conditions as it may

not function properly:
— During bad weather (rain, fog,

snow, etc.).

— When driving on slippery

roads, such as on ice or snow.

— When driving on winding or

uneven roads.

— When there is a lane closure

due to road repairs.

— When driving in a makeshift or

temporary lane.

— When driving on roads where

the lane width is too narrow.

— When driving without normal

tire conditions (for example,

tire wear, low tire pressure,

installation of spare tire, tire

chains, non-standard wheels).

— When the vehicle is equipped

with non-original brake parts

or suspension parts.

— When towing a trailer or other

vehicle.

.

The system may not function

properly under the following con-

ditions:
— On roads where there are

multiple parallel lane markers;

lane markers that are faded or

not painted clearly; yellow

painted lane markers; non-

standard lane markers; or

lane markers covered with

water, dirt, snow, etc.

— On roads where discontinued

lane markers are still detect-

able.

— On roads where there are

sharp curves.

— On roads where there are

sharply contrasting objects,

such as shadows, snow,

water, wheel ruts, seams or

lines remaining after road re-

pairs. (The LDW system could

detect these items as lane

markers.)

— On roads where the traveling

lane merges or separates.

Starting and driving

5-29

-------------------------------------------------------------------------------------------------------------------------------------------------------------

5-30

Starting and driving

— When the vehicle’s traveling

direction does not align with

the lane marker.

— When traveling close to the

vehicle in front of you, which

obstructs the lane camera

unit detection range.

— When rain, snow, dirt or object

adheres to the windshield in

front of the lane camera unit.

— When the headlights are not

bright due to dirt on the lens

or if the aiming is not adjusted

properly.

— When strong light enters the

lane camera unit. (For exam-

ple, the light directly shines on

the front of the vehicle at

sunrise or sunset.)

— When a sudden change in

brightness occurs. (For exam-

ple, when the vehicle enters or

exits a tunnel or under a

bridge.)

SYSTEM TEMPORARILY UNAVAIL-

ABLE

Condition A:

If the vehicle is parked in direct sunlight

under high temperature conditions (over

approximately 104°F (40°C)) and then

started, the LDW system may be deacti-

vated automatically, the LDW indicator

will flash and the following message will

appear in the vehicle information display.

.

“Not Available: High Camera Temp”

When the interior temperature is reduced,

the LDW system will resume operating

automatically and the LDW indicator will

stop flashing.

Condition B:

The warning function of the LDW system

is not designed to work under the follow-

ing conditions:

.

When you operate the lane change

signal and change traveling lanes in

the direction of the signal. (The LDW

system will become operable again

approximately 2 seconds after the

lane change signal is turned off.)

.

When the vehicle speed lowers to less

than approximately 37 MPH (60 km/h).

Action to take:

After the above conditions have finished

and the necessary operating conditions

are satisfied, the LDW system will resume.

SYSTEM MALFUNCTION

If the LDW system malfunctions, it will

cancel automatically and “Malfunction”

warning message will appear in the

vehicle information display. If the warning

message appears, pull off the road to a

safe location and stop the vehicle. Place

the ignition switch in the OFF position

and restart the engine. If the warning

message continues to appear, have the

system checked. It is recommended that

you visit a NISSAN dealer for this service.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

SSD0453

SYSTEM MAINTENANCE

The lane camera unit

for the LDW

system is located above the inside mirror.
To keep the proper operation of the LDW

system and prevent a system malfunc-

tion, be sure to observe the following:

.

Always keep the windshield clean.

.

Do not attach a sticker (including

transparent material) or install an

accessory near the camera unit.

.

Do not place reflective materials, such

as white paper or a mirror, on the

instrument panel. The reflection of

sunlight may adversely affect the

camera unit’s capability of detecting

the lane markers.

.

Do not strike or damage the areas

around the camera unit. Do not touch

the camera lens or remove the screw

located on the camera unit. If the

camera unit is damaged due to an

accident, it is recommended that you

visit a NISSAN dealer.

WARNING

Failure to follow the warnings and

instructions for proper use of the I-LI

system could result in serious injury

or death.

.

The I-LI system will not steer the

vehicle or prevent loss of control.

It is the driver’s responsibility to

stay alert, drive safely, keep the

vehicle in the traveling lane, and

be in control of the vehicle at all

times.

.

The I-LI system is primarily in-

tended for use on well-developed

freeways or highways. It may not

detect the lane markers in certain

road, weather, or driving condi-

tions.

Starting and driving

5-31

INTELLIGENT LANE INTERVENTION (I-LI)

-------------------------------------------------------------------------------------------------------------------------------------------------------------

5-32

Starting and driving

WAF0734X

The I-LI system must be turned on with

the dynamic driver assistance switch on

the steering wheel, every time the ignition

is placed in the ON position.
The I-LI system will operate when the

vehicle is driven at speeds of approxi-

mately 37 MPH (60 km/h) and above, and

only when the lane markings are clearly

visible on the road. The I-LI system warns

the driver when the vehicle has left the

center of the traveling lane with an

indicator and steering wheel vibration.

The system helps assist the driver to

return the vehicle to the center of the

traveling lane by applying the brakes to

the left or right wheels individually (for a

short period of time).

The I-LI system monitors the lane mar-

kers on the traveling lane using the

camera unit

located above the inside

mirror.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

WAF0735X

I-LI ON indicator (on the vehicle informa-

tion display)
I-LI indicator (on the vehicle information

display)
Vehicle information display
Dynamic driver assistance switch

I-LI SYSTEM OPERATION

The I-LI system operates above approxi-

mately 37 MPH (60 km/h) and when the

lane markings are clear. When the vehicle

approaches either the left or the right

side of the traveling lane, steering wheel

will vibrate and the I-LI indicator (orange)

on the vehicle information display will

blink to alert the driver. Then, the I-LI

system will automatically apply the

brakes for a short period of time to help

assist the driver to return the vehicle to

the center of the traveling lane.
To turn on the I-LI system, push the

dynamic driver assistance switch on the

steering wheel after starting the engine.

The I-LI ON indicator on the vehicle

information display will illuminate. Push

the dynamic driver assistance switch

again to turn off the I-LI system. The I-LI

ON indicator will turn off.

Starting and driving

5-33

-------------------------------------------------------------------------------------------------------------------------------------------------------------

5-34

Starting and driving

WAF0736X

Steering-wheel-mounted control (left

side)
Vehicle information display
Dynamic driver assistance switch

HOW TO ENABLE/DISABLE THE I-LI

SYSTEM

Perform the following steps to enable or

disable the I-LI system.
1. Push the

button until “Settings”

appears in the vehicle information

display and then push the OK. Use

the

button to select “Driver Assis-

tance.” Then push the OK.

2. Select “Lane” and push the OK.
3. Select “Prevention (LDP)” and push the

OK.

4. Push the dynamic driver assistance

switch to turn the system on or off.

The dynamic driver assistance switch

is

used for the I-LI and I-BSI systems.
When the dynamic driver assistance

switch

is pushed, the I-BSI system will

also turn on or off simultaneously. The I-LI

system can be individually set to on or off

on the vehicle information display.
If the system is set to off, the system will

not turn on even if the dynamic driver

assistance switch

is pushed to on.

I-LI SYSTEM LIMITATIONS

WARNING

Listed below are the system limita-

tions for the I-LI system. Failure to

follow the warnings and instructions

for proper use of the I-LI system

could result in serious injury or

death.

.

The I-LI system may activate if

you change lanes without first

-------------------------------------------------------------------------------------------------------------------------------------------------------------

activating your turn signal or, for

example, if a construction zone

directs traffic to cross an existing

lane marker. If this occurs you

may need to apply corrective

steering to complete your lane

change.

.

Because the I-LI may not activate

under the road, weather, and lane

marker conditions described in

this section, it may not activate

every time your vehicle begins to

leave its lane and you will need to

apply corrective steering.

.

The I-LI system will not operate at

speeds below approximately 37

MPH (60 km/h) or if it cannot

detect lane markers.

.

When the I-LI system is operating,

avoid excessive or sudden steer-

ing maneuvers. Otherwise, you

could lose control of the vehicle.

.

Do not use the I-LI system under

the following conditions as it may

not function properly:
— During bad weather (rain, fog,

snow, etc.).

— When driving on slippery

roads, such as on ice or snow.

— When driving on winding or

uneven roads.

— When there is a lane closure

due to road repairs.

— When driving in a makeshift or

temporary lane.

— When driving on roads where

the lane width is too narrow.

— When driving without normal

tire conditions (for example,

tire wear, low tire pressure,

installation of spare tire, tire

chains, non-standard wheels).

— When the vehicle is equipped

with non-original brake parts

or suspension parts.

— When towing a trailer or other

vehicle.

— On roads where there are

multiple parallel lane markers;

lane markers that are faded or

not painted clearly; yellow

painted lane markers; non-

standard lane markers; or

lane markers covered with

water, dirt, snow, etc.

— On roads where discontinued

lane markers are still detect-

able.

— On roads where there are

sharp curves.

— On roads where there are

sharply contrasting objects,

such as shadows, snow,

water, wheel ruts, seams or

lines remaining after road re-

pairs. (The I-LI system could

detect these items as lane

markers.)

— On roads where the traveling

lane merges or separates.

— When the vehicle’s traveling

direction does not align with

the lane marker.

— When traveling close to the

vehicle in front of you, which

obstructs the lane camera

unit detection range.

— When rain, snow or dirt ad-

heres to the windshield in

front of the lane camera unit.

— When the headlights are not

bright due to dirt on the lens

or if the aiming is not adjusted

properly.

— When strong light enters the

lane camera unit. (For exam-

ple, the light directly shines on

Starting and driving

5-35

-------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

 

 

 

 

 

Content      ..     19      20      21      22     ..