Nissan Frontier (2022 year). Manual in english - page 20

 

  Index      Manuals     Nissan Frontier (2022 year). Manual in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

 

 

 

Content      ..     18      19      20      21     ..

 

 

 

Nissan Frontier (2022 year). Manual in english - page 20

 

 

To cancel the preset speed,

use one of the

following three methods:
• Push the CANCEL switch; the

indica-

tor in the vehicle information display
goes out.

• Tap the brake pedal; the

indicator

goes out.

• Push the ON/OFF switch off. The

indicator in the vehicle information dis-
play goes out.

The cruise control is automatically can-
celed and the

indicator in the vehicle

information display goes out if:
• You depress the brake pedal while push-

ing the ACCEL/RES or COAST/SET switch.
The

preset

speed

is

deleted

from

memory.

• The vehicle slows down more than 8 mph

(13 km/h) below the set speed.

• You move the shift lever to N (Neutral).

To reset at a faster cruising speed,

use

one of the following three methods:
• Depress the accelerator pedal. When the

vehicle attains the desired speed, push
and release the COAST/SET switch.

• Push and hold the ACCEL/RES switch.

When the vehicle attains the speed you
desire, release the switch.

• Push and release the ACCEL/RES switch.

Each time you do this, the set speed in-
creases by about 1 mph (1.6 km/h).

To reset at a slower cruising speed,

use

one of the following three methods:
• Lightly tap the brake pedal. When the ve-

hicle attains the desired speed, push the
COAST/SET switch and release it.

• Push and hold the COAST/SET switch. Re-

lease the switch when the vehicle slows
to the desired speed.

• Push and release the COAST/SET switch.

Each time you do this, the set speed de-
creases by about 1 mph (1.6 km/h).

To resume the preset speed,

push and

release the ACCEL/RES switch. The vehicle
returns to the last set cruising speed when
the vehicle speed is over 25 mph (40 km/h).

5-52

Starting and driving

-------------------------------------------------------------------------------------------------------------------------------------------------------------

O

A

ICC switch

WARNING

Failure to follow the warnings and in-
structions for proper use of the ICC sys-
tem could result in serious injury or
death.

The ICC system is only an aid to assist
the driver and is not a collision
warning or avoidance device. It is the
driver’s responsibility to stay alert,
drive safely, and be in control of the
vehicle at all times.

Always observe posted speed limits
and do not set the speed over them.

Always drive carefully and atten-
tively when using the ICC system.
Read and understand the Owner’s
Manual thoroughly before using the
ICC system. To avoid serious injury or
death, do not rely on the system to
prevent accidents or to control the
vehicle’s speed in emergency situa-
tions. Do not use the ICC system ex-
cept in appropriate road and traffic
conditions.

LSD4390

INTELLIGENT CRUISE CONTROL (if so
equipped)

Starting and driving

5-53

-------------------------------------------------------------------------------------------------------------------------------------------------------------

In the conventional (fixed speed)
cruise

control

mode,

a

warning

chime will not sound to warn you if
you are too close to the vehicle
ahead. Pay special attention to the
distance between your vehicle and
the vehicle ahead of you or a collision
could occur.

The ICC system maintains a selected dis-
tance from the vehicle in front of you within
the speed range of 0 to 90 mph (0 to 144
km/h) up to the set speed. The set speed
can be selected by the driver between 20 to
90 mph (30 to 144 km/h).

The vehicle travels at a set speed when the
road ahead is clear.

The ICC system can be set to one of two
cruise control modes:

Vehicle-to-vehicle

distance

control

mode:

For maintaining a selected dis-

tance between your vehicle and the ve-
hicle in front of you up to the preset speed

Conventional (fixed speed) cruise con-
trol mode:

For cruising at a preset speed

Push the ICC switch

O

A

to choose the

cruise control mode between the vehicle-
to-vehicle distance control mode and the
conventional (fixed speed) cruise control
mode.

Once a control mode is activated, it cannot
be changed to the other cruise control
mode. To change the mode, push the ICC
switch

O

A

once to turn the system off. Then

push the ICC switch

O

A

again to turn the

system back on and select the desired
cruise control mode.

Always confirm the setting in the ICC sys-
tem display.

For the vehicle-to-vehicle distance control
mode, see “Vehicle-to-vehicle distance
control mode” (P. 5-55).

For the conventional (fixed speed) cruise
control mode, see “Conventional (fixed
speed) cruise control mode” (P. 5-72).

5-54

Starting and driving

-------------------------------------------------------------------------------------------------------------------------------------------------------------

HOW TO SELECT THE CRUISE
CONTROL MODE

Selecting

the

vehicle-to-vehicle

dis-

tance control mode:

To choose the

vehicle-to-vehicle distance control mode,
quickly push and release the ON/OFF
switch

O

A

.

Selecting the conventional (fixed speed)
cruise control mode:

To choose the con-

ventional

(fixed

speed)

cruise

control

mode, push and hold the ON/OFF switch

O

A

for longer than approximately 1.5 sec-

onds. For additional information, see “Con-
ventional

(fixed

speed)

cruise

control

mode” (P. 5-72).

VEHICLE-TO-VEHICLE DISTANCE
CONTROL MODE

In the vehicle-to-vehicle distance control
mode, the ICC system automatically main-
tains a selected distance from the vehicle
traveling in front of you according to that
vehicle’s speed (up to the set speed), or at
the set speed when the road ahead is clear.

The ICC system is intended to enhance the
operation of the vehicle when following a
vehicle traveling in the same lane and
direction.

LSD3759

LSD4499

Starting and driving

5-55

-------------------------------------------------------------------------------------------------------------------------------------------------------------

If the radar sensor

O

1

detects a slower

moving vehicle ahead, the system will re-
duce the vehicle speed so that your vehicle
follows the vehicle in front at the selected
distance.

The system automatically controls the
throttle and applies the brakes (up to ap-
proximately 40% of vehicle braking power)
if necessary.

The detection range of the sensor is ap-
proximately 650 ft (200 m) ahead.

VEHICLE-TO-VEHICLE DISTANCE
CONTROL MODE OPERATION

The vehicle-to-vehicle distance control
mode is designed to maintain a selected
distance from the vehicle in front of you
and can reduce the speed to match a

LSD4391

5-56

Starting and driving

-------------------------------------------------------------------------------------------------------------------------------------------------------------

slower vehicle ahead. The system will de-
celerate the vehicle as necessary and if the
vehicle ahead comes to a stop, the vehicle
decelerates to a standstill. However, the ICC
system can only apply up to 40% of the
vehicle’s total braking power.

This system should only be used when traf-
fic conditions allow vehicle speeds to re-
main fairly constant or when vehicle
speeds change gradually. If a vehicle
moves into the traveling lane ahead or if a
vehicle traveling ahead rapidly decelerates,
the distance between vehicles may be-
come closer because the ICC system can-
not decelerate the vehicle quickly enough.
If this occurs, the ICC system will sound a
warning chime and blink the system dis-
play to notify the driver to take necessary
action.

The system will cancel and a warning
chime will sound if the speed is below ap-
proximately 15 mph (25 km/h) and a vehicle
is not detected ahead. The system will also
disengage when the vehicle goes above
the maximum set speed.

For additional information, see “Approach
warning” (P. 5-63).

The following items are controlled in the
vehicle-to-vehicle distance control mode:
• When there are no vehicles traveling

ahead, the vehicle-to-vehicle distance
control mode maintains the speed set by
the driver. The set speed range is be-
tween approximately 20 and 90 mph (30
and 144 km/h).

• When there is a vehicle traveling ahead,

the vehicle-to-vehicle distance control
mode adjusts the speed to maintain the
distance, selected by the driver, from the
vehicle ahead. If the vehicle ahead comes
to a stop, the vehicle decelerates to a
standstill within the limitations of the sys-
tem. The system will cancel once it judges
a standstill with a warning chime.

• When the vehicle traveling ahead has

moved out from its lane of travel, the
vehicle-to-vehicle distance control mode
accelerates and maintains vehicle speed
up to the set speed.

The ICC system does not control vehicle
speed or warn you when you approach
stationary and slow moving vehicles. You
must pay attention to vehicle operation to
maintain proper distance from vehicles
ahead when approaching toll gates or traf-
fic congestion.

When driving on the freeway at a set speed
and approaching a slower traveling vehicle
ahead, the ICC system will adjust the speed
to maintain the distance, selected by the
driver, from the vehicle ahead. If the vehicle
ahead changes lanes or exits the freeway,
the ICC system will accelerate and main-
tain the speed up to the set speed. Pay
attention to the driving operation to main-
tain control of the vehicle as it accelerates
to the set speed.

The vehicle may not maintain the set
speed on winding or hilly roads. If this oc-
curs, you will have to manually control the
vehicle speed.

SSD0254

Starting and driving

5-57

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Normally when controlling the distance to
a vehicle ahead, this system automatically
accelerates or decelerates your vehicle ac-
cording to the speed of the vehicle ahead.
Depress the accelerator to properly accel-
erate your vehicle when acceleration is re-
quired for a lane change. Depress the brake
pedal when deceleration is required to
maintain a safe distance to the vehicle
ahead due to its sudden braking or if a
vehicle cuts in. Always stay alert when us-
ing the ICC system.

VEHICLE-TO-VEHICLE DISTANCE
CONTROL MODE SWITCHES

The system is operated by the ON/OFF
switch

and

four

control

switches, all

mounted on the steering wheel.

1.

CANCEL switch:

Deactivates the system without erasing
the set speed.

2.

ACCEL/RES switch:

Resumes set speed or increases speed
incrementally.

3.

COAST/SET switch:

Sets desired cruise speed or reduces
speed incrementally.

4.

ON/OFF switch:

Master switch to activate the system.

5.

DISTANCE switch:

switch:

Changes the vehicle’s following distance:

• Long
• Middle
• Short

LSD3713

5-58

Starting and driving

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Vehicle-to-vehicle distance
control mode display and
indicators

The display is located between the speed-
ometer and tachometer.

1. This indicator indicates the ICC system

status depending on a color:

ICC system ON indicator (gray):

Indi-

cates that the ON/OFF switch is on.

ICC system SET indicator (green):

In-

dicates that the cruising speed is set.

ICC system warning (yellow):

Indi-

cates that there is a malfunction in the
ICC system.

2. Set vehicle speed indicator:

Indicates the set vehicle speed.

For Canadian models, the speed is dis-
played in km/h.

3. Vehicle ahead detection indicator:

Indicates whether it detects a vehicle in
front of you.

4. Set distance indicator:

Displays the selected distance between
vehicles set with the distance switch.

Operating vehicle-to-vehicle
distance control mode

To turn on the cruise control,

quickly push

and release the ON/OFF switch

O

A

. The ICC

system ON indicator (gray), set distance in-
dicator and set vehicle speed indicator

O

B

come on in a standby state for setting.

LSD3297

LSD3761

Starting and driving

5-59

-------------------------------------------------------------------------------------------------------------------------------------------------------------

To set cruising speed,

accelerate your ve-

hicle to the desired speed, push the
COAST/SET switch

O

C

and release it. The

ICC system set indicator (green), vehicle
ahead detection indicator, set distance in-
dicator and set vehicle speed indicator

O

B

will come on. Take your foot off the accel-
erator pedal. Your vehicle will maintain the
set speed.

When the COAST/SET switch is pushed un-
der the following conditions, the system
cannot be set and the ICC indicators will
blink for approximately 2 seconds:
• When traveling below 20 mph (30 km/h)

and a vehicle ahead is not detected

• When the shift lever is not in the D (Drive)

or Manual mode

• When the parking brake is applied
• When the brakes are operated by the

driver

When the COAST/SET switch is pushed un-
der the following conditions, the system
cannot be set.

A warning chime will sound and a message
will pop up:
• When the VDC system is off (To use the

ICC system, turn on the VDC system. Push
the ON/OFF switch to turn off the ICC
system and reset the ON/OFF switch by
pushing the ON/OFF switch again.)

For additional information about the
VDC system, see “Vehicle Dynamic Con-
trol (VDC) system” (P. 5-121).

• When VDC is operating
• When a wheel is slipping (To use the ICC

system, make sure the wheels are no lon-
ger slipping.)

LSD3762

LSD3102

5-60

Starting and driving

-------------------------------------------------------------------------------------------------------------------------------------------------------------

1

System set display with vehicle ahead

2

System set display without vehicle
ahead

The driver sets the desired vehicle speed
based on the road conditions. The ICC sys-
tem maintains the set vehicle speed, simi-
lar to standard cruise control, as long as no
vehicle is detected in the lane ahead. The
ICC system displays the set speed.

Vehicle detected ahead

When a vehicle is detected in the lane
ahead, the ICC system decelerates the ve-
hicle by controlling the throttle and apply-
ing the brakes to match the speed of a
slower vehicle ahead. The system then
controls the vehicle speed based on the
speed of the vehicle ahead to maintain the
driver selected distance.

NOTE:

• The stop lights of the vehicle come on

when braking is performed by the ICC
system.

• When the brake operates, a noise may

be heard. This is not a malfunction.

When a vehicle ahead is detected, the ve-
hicle ahead detection indicator comes on.
The ICC system will also display the set
speed and selected distance.

Vehicle ahead not detected

When a vehicle is no longer detected
ahead, the ICC system gradually acceler-
ates your vehicle to resume the previously
set vehicle speed. The ICC system then
maintains the set speed.

When a vehicle is no longer detected, the
vehicle ahead detection indicator turns off.

If a vehicle ahead appears during accelera-
tion to the set vehicle speed or any time the
ICC system is in operation, the system con-
trols the distance to that vehicle.

When a vehicle is no longer detected under
approximately 15 mph (24 km/h), the sys-
tem will be canceled.

LSD3301

Starting and driving

5-61

-------------------------------------------------------------------------------------------------------------------------------------------------------------

When passing another vehicle,

the set

speed indicator

O

A

will flash when the ve-

hicle speed exceeds the set speed. The ve-
hicle detect indicator will turn off when the
area ahead of the vehicle is open. When the
pedal is released, the vehicle will return to
the previously set speed.

Even though your vehicle speed is set in the
ICC system, you can depress the accelera-
tor pedal when it is necessary to accelerate
your vehicle rapidly.

How to change the set vehicle
speed

To cancel the preset speed,

use one of the

following methods:
• Push the CANCEL switch. The set vehicle

speed indicator will go out.

• Tap the brake pedal. The set vehicle

speed indicator will go out.

• Turn the ON/OFF switch off. The ICC indi-

cators will go out.

To reset at a faster cruising speed,

use

one of the following methods:
• Depress the accelerator pedal. When the

vehicle attains the desired speed, push
and release the COAST/SET switch.

• Push and hold the ACCEL/RES switch.

The set vehicle speed will increase by ap-
proximately 5 mph (5 km/h).

• Push, then quickly release the ACCEL/RES

switch. Each time you do this, the set
speed will increase by approximately 1
mph (1 km/h).

To reset at a slower cruising speed,

use

one of the following methods:
• Lightly tap the brake pedal. When the ve-

hicle attains the desired speed, push the
COAST/SET switch and release it.

• Push and hold the COAST/SET switch.

The set vehicle speed will decrease by
approximately 5 mph (5 km/h).

• Push, then quickly release the COAST/SET

switch. Each time you do this, the set
speed will decrease by approximately 1
mph (1 km/h).

To resume the preset speed,

push and

release the ACCEL/RES switch. The vehicle
will resume the last set cruising speed
when the vehicle speed is over 20 mph (32
km/h).

LSD3267

5-62

Starting and driving

-------------------------------------------------------------------------------------------------------------------------------------------------------------

How to change the set distance
to the vehicle ahead

The distance to the vehicle ahead can be
selected at any time depending on the traf-
fic conditions.

Each time the distance

switch

O

A

is

pushed, the set distance will change to
long, middle, short and back to long again,
in that sequence.

Distance Approximate distance at

60 mph (100 km/h)
[ft (m)]

1.

Long

200 (60)

2.

Middle

150 (45)

3.

Short

90 (30)

• The distance to the vehicle ahead will

change according to the vehicle speed.
The higher the vehicle speed, the longer
the distance.

• The distance setting will remain at the

current setting even if the engine is
restarted.

Approach warning

If your vehicle comes closer to the vehicle
ahead due to rapid deceleration of that ve-
hicle or if another vehicle cuts in, the sys-
tem warns the driver with the chime and
ICC system display. Decelerate by depress-
ing the brake pedal to maintain a safe ve-
hicle distance if:
• The chime sounds.
• The vehicle ahead detection indicator

blinks.

The warning chime may not sound in
some cases when there is a short distance
between vehicles. Some examples are:
• When the vehicles are traveling at the

same speed and the distance between
vehicles is not changing.

• When the vehicle ahead is traveling faster

and the distance between vehicles is
increasing.

• When a vehicle cuts in near your vehicle.

The warning chime will not sound when:
• The vehicle approaches other vehicles

that are parked or moving slowly.

• The accelerator pedal is depressed, over-

riding the system.

LSD3714

LSD2752

Starting and driving

5-63

-------------------------------------------------------------------------------------------------------------------------------------------------------------

NOTE:

The approach warning chime may sound
and the system display may blink when
the ICC sensor detects objects on the
side of the vehicle or on the side of the
road. This may cause the ICC system to
decelerate or accelerate the vehicle. The
ICC sensor may detect these objects
when the vehicle is driven on winding
roads, narrow roads, hilly roads, or when
entering or exiting a curve. In these
cases you will have to manually control
the proper distance ahead of your
vehicle.

Also, the sensor sensitivity can be affected
by vehicle operation (steering maneuver or
driving position in the lane) or traffic or ve-
hicle condition (for example, if a vehicle is
being driven with some damage).

Automatic cancellation

A chime sounds under the following condi-
tions and the control is automatically can-
celed:
• When the vehicle ahead is not detected

and your vehicle is traveling below the
speed of 15 mph (25 km/h)

• When the system judges the vehicle is at

a standstill

• When the shift lever is not in the D (Drive)

position, Manual mode or L (Low) range.

• When the parking brake system is applied
• When the VDC system is turned off
• When VDC operates
• When distance measurement becomes

impaired due to adhesion of dirt or ob-
struction to the sensor

• When a wheel slips
• When the radar signal is temporarily

interrupted

VEHICLE-TO-VEHICLE DISTANCE
CONTROL MODE LIMITATIONS

WARNING

Listed below are the system limitations
for the ICC system. Failure to operate
the vehicle in accordance with these
system limitations could result in seri-
ous injury or death.

The ICC system is primarily intended
for use on straight, dry, open roads
with light traffic. It is not advisable to
use the ICC system in city traffic or
congested areas.

The ICC system will not adapt auto-
matically to road conditions. This
system should be used in evenly
flowing traffic. Do not use the system
on roads with sharp curves, or on icy
roads, in heavy rain or in fog.

As there is a performance limit to the
distance control function, never rely
solely on the ICC system. This system
does not correct careless, inattentive
or absentminded driving, or over-
come poor visibility in rain, fog, or
other bad weather. Decelerate the
vehicle speed by depressing the
brake pedal, depending on the dis-
tance to the vehicle ahead and the
surrounding circumstances in order
to maintain a safe distance between
vehicles.

If the vehicle ahead comes to a stop,
the vehicle decelerates to a standstill
within the limitations of the system.
The system will cancel once it judges
that the vehicle has come to a stand-
still and sound a warning chime. To
prevent the vehicle from moving, the
driver must depress the brake pedal.

5-64

Starting and driving

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Always pay attention to the opera-
tion of the vehicle and be ready to
manually control the proper follow-
ing distance. The ICC system may not
be able to maintain the selected dis-
tance between vehicles (following
distance) or selected vehicle speed
under some circumstances.

The system may not detect the ve-
hicle in front of you in certain road or
weather conditions. To avoid acci-
dents, never use the ICC system un-
der the following conditions:

On roads where the traffic is heavy
or there are sharp curves

On slippery road surfaces such as
on ice or snow, etc.

During bad weather (rain, fog,
snow, etc.)

When rain, snow or dirt adhere to
the bumper around the distance
sensor

On steep downhill roads (the ve-
hicle may go beyond the set ve-
hicle speed and frequent braking
may result in overheating the
brakes)

On repeated uphill and downhill
roads

When traffic conditions make it
difficult to keep a proper distance
between vehicles because of fre-
quent

acceleration

or

deceleration

Interference

by

other

radar

sources

Do not use the ICC system if you are
towing a trailer. The system may not
detect a vehicle ahead.

In some road or traffic conditions, a
vehicle or object can unexpectedly
come into the sensor detection zone
and cause automatic braking. Al-
ways stay alert and avoid using the
ICC system where not recommended
in this warning section.

The radar sensor will not detect the follow-
ing objects:
• Stationary and slow moving vehicles
• Pedestrians or objects in the roadway
• Oncoming vehicles in the same lane
• Motorcycles traveling offset in the travel

lane

The sensor generally detects the signals
returned from the vehicle ahead. Therefore,
if the sensor cannot detect the reflection

from the vehicle ahead, the ICC system
may not maintain the selected distance.

The following are some conditions in which
the sensor cannot properly detect a ve-
hicle ahead and the system may not oper-
ate properly:
• When snow or road spray from traveling

vehicles reduces the sensor’s detection.

• When your vehicle is towing a trailer, etc.
• When excessively heavy baggage is

loaded in the rear seat or cargo area of
your vehicle.

The ICC system is designed to automati-
cally check the sensor’s operation within
the limitations of the system.

When the sensor is covered with dirt or is
obstructed, the system will automatically
be canceled. If the sensor is covered with
ice, a transparent or translucent vinyl bag,
etc., the ICC system may not detect them.
In these instances, the vehicle-to-vehicle
distance control mode may not cancel and
may not be able to maintain the selected
following distance from the vehicle ahead.
Be sure to check and clean the sensor
regularly.

Starting and driving

5-65

-------------------------------------------------------------------------------------------------------------------------------------------------------------

The detection zone of the radar sensor is
limited. A vehicle ahead must be in the de-
tection zone for the vehicle-to-vehicle dis-
tance detection mode to maintain the se-
lected distance from the vehicle ahead.

A vehicle ahead may move outside of the
detection zone due to its position within
the same lane of travel. Motorcycles may
not be detected in the same lane ahead if
they are traveling offset from the centerline
of the lane. A vehicle that is entering the
lane ahead may not be detected until the
vehicle has completely moved into the
lane.

If this occurs, the ICC system may warn
you by blinking the system indicator and
sounding the chime. The driver may
have to manually control the proper dis-
tance away from vehicle traveling ahead.

SSD0252

5-66

Starting and driving

-------------------------------------------------------------------------------------------------------------------------------------------------------------

When driving on some roads, such as wind-
ing, hilly, curved, narrow roads, or roads
which are under construction, the radar
sensor may detect vehicles in a different
lane, or may temporarily not detect a ve-
hicle traveling ahead. This may cause the
radar system to decelerate or accelerate
the vehicle.

The detection of vehicles may also be af-
fected by vehicle operation (steering ma-
neuver or traveling position in the lane, etc.)
or vehicle condition.

If this occurs, the ICC system may warn
you by blinking the system indicator and
sounding the chime unexpectedly. You
will have to manually control the proper
distance away from the vehicle traveling
ahead.

SSD0253

Starting and driving

5-67

-------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

 

 

 

 

 

Content      ..     18      19      20      21     ..