Nissan Kicks (2022 year). Manual in english - page 10

 

  Index      Manuals     Nissan Kicks (2022 year). Manual in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

 

 

 

Content      ..     8      9      10      11     ..

 

 

 

Nissan Kicks (2022 year). Manual in english - page 10

 

 

LUGGAGE HOOKS

The luggage hooks that are located on the
floor should have loads less than 110 lbs.
(490 N) to a single hook.

The luggage hooks can be used to secure
cargo with ropes or other types of straps.

WARNING

Properly secure all cargo with ropes
or straps to help prevent it from slid-
ing or shifting. Do not place cargo
higher than the seatbacks. In a sud-
den stop or collision, unsecured
cargo could cause personal injury.

Use suitable ropes and hooks to se-
cure cargo.

Never allow anyone to ride in the lug-
gage area. It is extremely dangerous
to ride in a cargo area inside of a ve-
hicle. In a collision, people riding in
these areas are more likely to be se-
riously injured or killed.

Do not allow people to ride in any
area of your vehicle that is not
equipped with seats and seat belts.

The child restraint top tether strap
may be damaged by contact with
items in the cargo area. Secure any
items in the cargo area. Your child
could be seriously injured or killed in
a collision if the top tether strap is
damaged.

Be sure everyone in your vehicle is in
a seat and using a seat belt properly.

GROCERY HOOKS

The grocery hooks are located in the cargo
area and allow for standard size plastic
grocery bags to hang side by side.

CAUTION

Do not apply a total load of more than
6.6 lbs. (3 kg) to a single grocery hook.

LIC4300

LIC3569

Left side shown (right similar)

2-66

Instruments and controls

-------------------------------------------------------------------------------------------------------------------------------------------------------------

CARGO COVER (if so equipped)

WARNING

Never put anything on the cargo
cover, no matter how small. Any ob-
ject on it could cause an injury in an
accident or sudden stop.

Do not put objects heavier than 44
lbs. (20 kg) on the cargo cover for
long periods of time.

Do not leave the cargo cover in the
vehicle with it disengaged from the
holder.

Properly secure all cargo with ropes
or straps to help prevent it from slid-
ing or shifting. Do not place cargo
higher than the seatbacks. In a sud-
den stop or collision, unsecured
cargo could cause personal injury.

Properly secure cargo and do not al-
low it to contact the top tether strap
when it is attached to the top tether
anchor. Cargo that is not properly se-
cured or cargo that contacts the top
tether strap may damage the top
tether strap during a collision. If the
cargo cover contacts the top tether
strap when it is attached to the top
tether anchor, remove the cargo
cover from the vehicle or secure it on
the cargo floor below its attachment
location. If the cargo cover is not re-
moved, it may damage the top tether
strap during a collision. Your child
could be seriously injured or killed in
a collision if the child restraint top
tether strap is damaged.

The cargo cover keeps the luggage com-
partment

contents

hidden

from

the

outside.

To remove the cargo cover:

1

Remove the straps from the rear hatch.

2

Remove the cargo cover from the hold-
ers on the rear pillar.

LIC3349

Instruments and controls

2-67

-------------------------------------------------------------------------------------------------------------------------------------------------------------

ROOF RACK (if so equipped)

WARNING

Always install the crossbars onto the
roof side rails before loading cargo of
any kind. Loading cargo directly onto
the roof side rails or the vehicle’s roof
may cause vehicle damage.

Roof rack cross bars should be evenly
distributed.

Do not exceed maximum roof rack
crossbars load capacity and always
distribute the load uniformly.

Heavy loading of the crossbars has
the potential to affect the vehicle
stability and handling during sudden
or unusual handling maneuvers.

Properly secure all cargo with ropes
or straps to help prevent it from slid-
ing or shifting. In a sudden stop or
collision,

unsecured

cargo

could

cause personal injury.

Drive extra carefully when the vehicle
is loaded at or near the cargo carry-
ing capacity, especially if the signifi-
cant portion of that load is carried on
the crossbars.

CAUTION

Use care when placing or removing
items from the roof rack. If you can-
not comfortably lift the items onto
the roof rack from the ground, use a
ladder or a stool.

Do not apply any load directly to the roof
side rails

O

A

. Crossbars

O

B

must be in-

stalled

before

applying

load/cargo/

luggage to the roof of the vehicle.

Genuine NISSAN accessory crossbars may
be available through a NISSAN dealer. It is
recommended that you visit a NISSAN
dealer for additional information.

The service load capacity for the roof side
rails is 110 lbs. (50 kg.), however do not ex-
ceed the crossbars load capacity.

Be careful that your vehicle does not ex-
ceed the Gross Vehicle Weight Rating
(GVWR) or its Gross Axle Weight Rating
(GAWR front and rear).

For additional information regarding GVWR
and GAWR, refer to:
• F.M.V.S.S. or C.M.V.S.S. certification label (lo-

cated on the driver’s door pillar).

LIC4202

2-68

Instruments and controls

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Installing Crossbars (if so
equipped)

WARNING

It is recommended that you have the
roof rack crossbars installed by a
NISSAN dealer.

Protect the painted area on the ve-
hicle roof under the crossbars by
placing a piece of cloth under the
cross

bars

to

prevent

scratch

damage.

Make

sure

the

moonroof

(if

so

equipped) is in the closed position
during the installation process.

1. Manually remove all 8 protective caps
from the roof rack rails. See Fig. 1.

NOTE:

Please stow these protective covers in
the glove box.

CAUTION

Covers should be re-installed if cross-
bar is removed.

2. Identify the FRONT

(A)

& REAR

(B)

cross-

bar assembly in the kit.

NOTE:

REAR Crossbar is shorter in length com-
pared to the FRONT Crossbar

LIC4010

LIC4011

Instruments and controls

2-69

-------------------------------------------------------------------------------------------------------------------------------------------------------------

3. Identify markings on bottom side of
crossbar end supports.

NOTE:
• FL is FRONT Crossbar Driver Side.
• FR is FRONT Crossbar Passenger Side
• RL is REAR Crossbar Driver Side.
• RR is REAR Crossbar Passenger Side.

When assembled, the Arrow on the bot-
tom side of the crossbar end support al-
ways points towards the front of the
vehicle.

4. Position FRONT crossbar onto left and
right roof rack rail; and adjust right support
in and out until it fits securely into position.

See Fig. 4.

5. Make sure that the FRONT crossbar is in
proper position with respect to the roof
rack rail attachment positions, and loosely
install all 4 bolts on FRONT crossbar using
the T–30 TORX® screwdriver provided.

See Fig. 5.

NOTE:

Start with driver side front bolt. Bolts
should not be fully tightened, only par-
tially tightened.

LIC4012

LIC4013

LIC4014

2-70

Instruments and controls

-------------------------------------------------------------------------------------------------------------------------------------------------------------

6. Tighten all 4 bolts to 8–9 N-m torque
using a T–30 TORX® torque wrench.

NOTE:

a. Start with driver side front bolt.

b. T–30 TORX® torque wrench is not pro-

vided with kit.

7. Repeat steps 4 through 6 for the REAR
crossbar installation.

8. After installation, gently wiggle the cross-
bars to check for any loose fit. If loose fit is
noticed, please uninstall and repeat the
steps 4 through 7.

WARNING

Please locate max load label on
crossbar end support.

Do not load more than 100 lbs. (45kg).

Be careful that your vehicle does not
exceed the Gross Vehicle Weight Rat-
ing (GVWR) or its Gross Axle Weight
Rating (GAWR Front and Rear). The
GVWR and GAWR are located on the
Safety Compliance Certification La-
bel. For more information regarding
GVWR and GAWR, see “Dimensions
and weights” (P. 10-10).

Always evenly distribute the luggage
and appropriate crossbar attach-
ment on the crossbar.

POWER WINDOWS

WARNING

Make sure that all passengers have
their hands, etc., inside the vehicle
while it is in motion and before clos-
ing the windows. Use the window
lock switch to prevent unexpected
use of the power windows.

To help avoid risk of injury or death
through unintended operation of the
vehicle and/or its systems, including
entrapment in windows or inadver-
tent door lock activation, do not
leave children, people who require
the assistance of others or pets unat-
tended in your vehicle. Additionally,
the temperature inside a closed ve-
hicle on a warm day can quickly be-
come high enough to cause a signifi-
cant risk of injury or death to people
and pets.

The power windows operate when the ig-
nition switch is placed in the ON position or
for a period of time after the ignition switch
is placed in the OFF position. If the driver's
or passenger's door is opened during this
period of time, the power to the windows is
canceled.

LIC4015

WINDOWS

Instruments and controls

2-71

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driver's side power window
switch

The driver's side control panel is equipped
with switches to open or close all of the
windows.

To open a window, push the switch to the
detent and continue to hold down until the
desired window position is reached. To
close a window, pull the switch to the de-
tent and continue to hold up until the de-
sired window position is reached.

Front passenger's power window
switch

The passenger's window switch operates
only the corresponding passenger's win-
dow. To open the window partially, push the
switch down

O

1

lightly until the desired

window position is reached. To close the
window partially, pull the switch up

O

2

until

the desired window position is reached.

LIC3238

1. Window lock button

2. Power door lock switch

3. Front passenger side automatic switch

4. Right rear passenger side switch

5. Left rear passenger side switch

6. Driver’s side automatic switch

LIC2309

2-72

Instruments and controls

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Rear power window switch

The rear power window switches open or
close only the corresponding windows. To
open the window, push the switch and hold
it down

O

1

. To close the window, pull the

switch up

O

2

.

Locking passengers' windows

When the window lock switch is depressed,
only the driver's side window can be
opened or closed. Push it again to cancel
the window lock function.

Automatic operation

To fully open a window equipped with au-
tomatic

operation,

push

the

window

switch down to the second detent and re-
lease it; it need not be held. The window
automatically opens all the way. To stop
the window, lift the switch up while the win-
dow is opening.

If so equipped, it may be possible to fully
close a window equipped with automatic
operation, pull the switch up to the second
detent and release it; it need not be held. To
stop the window, push the switch down
while the window is closing.

Auto-reverse function

The auto-reverse function can be acti-
vated when a window is closed by auto-
matic operation.

Depending on the environment or driv-
ing conditions, the auto-reverse func-
tion may be activated if an impact or
load similar to something being caught
in the window occurs.

WARNING

There are some small distances imme-
diately

before

the

closed

position

which cannot be detected. Make sure
that all passengers have their hands,
etc., inside the vehicle before closing
the window.

If the vehicle's battery is disconnected, re-
placed, or jump started, the power window
auto-reverse function may not operate
properly. Have the power window auto-
reverse system re-initialized. It is recom-
mended that you visit a NISSAN dealer for
this service.

If the control unit detects something
caught in a window equipped with auto-
matic operation as it is closing, the window
will be immediately lowered.

LIC2663

LIC0410

Instruments and controls

2-73

-------------------------------------------------------------------------------------------------------------------------------------------------------------

When power window switch does
not operate

If the power window automatic function
(closing only) does not operate properly,
perform the following procedure to initial-
ize the power window system:

1. Place the ignition switch in the ON

position.

2. Open the window more than halfway by

operating the power window switch.

3. Pull the power window switch and hold it

to close the window, and then hold the
switch more than 3 seconds after the
window is closed.

4. Release the power window switch. Op-

erate the window by the automatic
function to confirm the initialization is
complete. The power window automati-
cally opens or closes depending on if the
automatic down or up function is
selected.

5. Perform steps 2 through 4 above for

other windows.

If the power window function does not op-
erate properly after performing the above
procedure have the system checked and
repaired. It is recommended that you visit a
NISSAN dealer for this service.

The interior light has a three-position
switch and operates regardless of ignition
switch position.

When the switch is in the ON position

O

3

,

the interior lights illuminate, regardless of
door position. The lights will go off after a
period of time unless the ignition switch is
placed in the ON position.

When the switch is in the

O

2

position, the

interior lights will stay on for a period of
time when:

LIC3985

INTERIOR LIGHTS

2-74

Instruments and controls

-------------------------------------------------------------------------------------------------------------------------------------------------------------

• The doors are unlocked by the key or the

power door lock switch while all doors are
closed and the ignition switch is placed in
the OFF position.

• The driver’s door is opened and then

closed while the ignition switch is placed
in the OFF position.

• The ignition switch is placed in the OFF

position while all doors are closed.

The light will turn off while the timer is acti-
vated when:
• The driver’s door is locked by the key, or

the power door lock switch.

• The ignition switch is placed in the ON

position.

When the switch is in the OFF position

O

1

,

the interior lights do not illuminate, regard-
less of door position.

The lights will turn off automatically after a
period of time while doors are open to pre-
vent

the

battery

from

becoming

discharged.

CAUTION

Do not use for extended periods of time
with the engine stopped. This could re-
sult in a discharged battery.

MAP LIGHTS

To turn the map lights on, push the switch
to the

O

1

position. To turn them off, push

the switch to the

O

2

position.

CAUTION

Do not use for extended periods of time
with the engine stopped. This could re-
sult in a discharged battery.

PERSONAL LIGHT

The personal light has a three-position
switch and operates regardless of ignition
switch position.

When the switch is in the ON position

O

1

,

the light illuminates, regardless of door
position.

When the switch is in the DOOR position

O

2

,

the light illuminates by opening a door.

The personal light will stay on for about 15
seconds when:

LIC3988

SIC2063A

Center personal light

Instruments and controls

2-75

-------------------------------------------------------------------------------------------------------------------------------------------------------------

• The doors are unlocked while the ignition

switch is placed in the OFF position and
all doors are closed.

• The driver's door is opened and then

closed while the ignition switch is placed
in the OFF position.

• The ignition switch is placed in the OFF

position while all doors are closed.

The personal light will turn off while the 15
second timer is activated when:
• The driver's door is locked by the key fob,

a key or the lock-unlock switch.

• The ignition switch is placed in the ON

position.

When the switch is in the OFF position

O

3

,

the light does not illuminate, regardless of
door position.

Some vehicles are equipped with a battery
saver feature that will automatically turn
off the interior lights after approximately 10
minutes if:
• doors are open, or
• the interior light switch is in the ON

position.

NOTE:

If the interior lights are turned off auto-
matically by the battery saver feature,
the ignition switch must be placed in the
ON position before the interior lights will
illuminate again.

For information regarding the interior light
bulb replacement, see “Exterior and interior
lights” (P. 8-25).

CAUTION

Do not use for extended periods of time
with the engine stopped. This could re-
sult in a discharged battery.

LUGGAGE COMPARTMENT LIGHT

The light illuminates when the rear hatch is
opened. When the rear hatch is closed, the
light goes off. For additional information,
see “Exterior and interior lights” (P. 8-25).

2-76

Instruments and controls

-------------------------------------------------------------------------------------------------------------------------------------------------------------

3 Pre-driving checks and adjustments

Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

NISSAN Intelligent Key® . . . . . . . . . . . . . . . . . . . . . . . 3-2
NISSAN Vehicle Immobilizer System
keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Locking with key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Locking with inside lock knob . . . . . . . . . . . . . . . . 3-5
Locking with power door lock switch . . . . . . . . . 3-5
Automatic door locks . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Child safety rear door lock . . . . . . . . . . . . . . . . . . . . 3-6

NISSAN Intelligent Key® system . . . . . . . . . . . . . . . . . . 3-6

Operating range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
Door locks/unlocks precaution . . . . . . . . . . . . . . . 3-8
NISSAN Intelligent Key® Operation . . . . . . . . . . . . 3-9
How to use the remote keyless entry
function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12
Warning signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . 3-16

Remote Engine Start (if so equipped) . . . . . . . . . . . 3-18

Remote Engine Start operating range . . . . . . . 3-18
Remote starting the vehicle . . . . . . . . . . . . . . . . . 3-19
Extending engine run time . . . . . . . . . . . . . . . . . . 3-19
Canceling a Remote Engine Start . . . . . . . . . . . 3-19
Conditions the Remote Engine Start will
not work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-20

Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21
Liftgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22

Opening the liftgate . . . . . . . . . . . . . . . . . . . . . . . . . 3-23
Closing the liftgate . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23
Secondary liftgate unlock . . . . . . . . . . . . . . . . . . . 3-24

Fuel-filler door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25

Opening the fuel-filler door . . . . . . . . . . . . . . . . . . 3-25
Fuel-filler cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25

Steering wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-26

Tilt and telescopic operation . . . . . . . . . . . . . . . . 3-27

Sun visors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-27

Vanity mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-28
Card holder (driver's side only) . . . . . . . . . . . . . . . 3-28

Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-28

Manual anti-glare rearview mirror
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-28
Automatic anti-glare rearview mirror
(Type A) (if so equipped) . . . . . . . . . . . . . . . . . . . . . 3-29
Automatic anti-glare rearview mirror
(Type B) (if so equipped) . . . . . . . . . . . . . . . . . . . . . 3-29
Outside mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-30

-------------------------------------------------------------------------------------------------------------------------------------------------------------

NISSAN INTELLIGENT KEY®

Your vehicle can only be driven with the
Intelligent Keys which are registered to
your

vehicle’s

Intelligent

Key

System

components.

Never leave the keys in the vehicle.

As many as four Intelligent Keys can be
registered and used with one vehicle. The
new keys must be registered by a NISSAN
dealer prior to use with the Intelligent Key
System of your vehicle. Since the registra-
tion process requires erasing all memory in
the Intelligent Key components when reg-
istering new keys, be sure to take all Intelli-
gent Keys that you have to the NISSAN
dealer.

A key number plate is supplied with your
keys. Record the key number and keep it in
a safe place (such as your wallet), not in the
vehicle. If you lose your keys, it is recom-
mended that you visit a NISSAN dealer for
duplicates by using the key number.
NISSAN does not record key numbers so it
is very important to keep track of your key
number plate.

A key number is only necessary when you
have lost all keys and do not have one to
duplicate from. If you still have a key, it can
be duplicated without knowing the key
number.

CAUTION

Listed below are conditions or occur-
rences which will damage the Intelli-
gent Key:

Do not allow the Intelligent Key,
which contains electrical compo-
nents, to come into contact with wa-
ter or salt water. This could affect the
system function.

Do not drop the Intelligent Key.

Do not strike the Intelligent Key
sharply against another object.

Do not change or modify the Intelli-
gent Key.

LPD2487

Type A (if so equipped)

1. Intelligent Keys (two sets)

2. Mechanical key

3. Key number plate (one plate)

LPD2797

Type B (if so equipped)

KEYS

3-2

Pre-driving checks and adjustments

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Wetting may damage the Intelligent
Key. If the Intelligent Key gets wet,
immediately wipe until it is com-
pletely dry.

Do not place the Intelligent Key for an
extended period in a place where
temperatures exceed 140°F (60°C).

Do not attach the Intelligent Key with
a key holder that contains a magnet.

Do not place the Intelligent Key near
equipment that produces a magnetic
field, such as a TV, audio equipment
and personal computers.

If an Intelligent Key is lost or stolen, NISSAN
recommends erasing the ID code of that
Intelligent Key from the vehicle. This may
prevent the unauthorized use of the Intelli-
gent Key to operate the vehicle. For infor-
mation regarding the erasing procedure, it
is recommended that you visit a NISSAN
dealer.

Mechanical key

The Intelligent Key contains the mechani-
cal key.

To remove the mechanical key, release the
lock knob on the back of the Intelligent Key.

To install the mechanical key, firmly insert it
into the Intelligent Key until the lock knob
returns to the lock position.

Use the mechanical key to lock or unlock
the driver’s door.

For additional information, see “Doors”
(P. 3-4).

CAUTION

Always carry the mechanical key in-
stalled in the Intelligent Key slot.

NISSAN VEHICLE IMMOBILIZER
SYSTEM KEYS

Additional or replacement keys:

If you still have a key, the key number is not
necessary when you need extra NISSAN
Vehicle Immobilizer System keys. Your ex-
isting key can be duplicated without know-
ing the key number. As many as four
NISSAN Vehicle Immobilizer System keys
can be used with one vehicle. You should
bring all NISSAN Vehicle Immobilizer Sys-
tem keys that you have to the NISSAN
dealer for registration. This is because the
registration process will erase the memory
of all key codes previously registered into
the NISSAN Vehicle Immobilizer System. Af-
ter the registration process, these compo-
nents will only recognize keys coded into
the NISSAN Vehicle Immobilizer System
during registration. Any key that is not
given to the dealer at the time of registra-
tion will no longer be able to start your
vehicle.

SPA1951

Pre-driving checks and adjustments

3-3

-------------------------------------------------------------------------------------------------------------------------------------------------------------

CAUTION

Do not allow the immobilizer system
key, which contains an electrical tran-
sponder, to come into contact with wa-
ter or salt water. This could affect sys-
tem function.

When the doors are locked using one of the
following methods, the doors cannot be
opened using the inside or outside door
handles. The doors must be unlocked to
open the doors.

WARNING

Always have the doors locked while
driving. Along with the use of seat
belts, this provides greater safety in
the event of an accident by helping to
prevent persons from being thrown
from the vehicle. This also helps keep
children and others from uninten-
tionally opening the doors, and will
help keep out intruders.

Before opening any door, always look
for and avoid oncoming traffic.

To help avoid risk of injury or death
through unintended operation of the
vehicle and/or its systems, including
entrapment in windows or inadver-
tent door lock activation, do not
leave children, people who require
the assistance of others or pets unat-
tended in your vehicle. Additionally,
the temperature inside a closed ve-
hicle on a warm day can quickly be-
come high enough to cause a signifi-
cant risk of injury or death to people
and pets.

DOORS

3-4

Pre-driving checks and adjustments

-------------------------------------------------------------------------------------------------------------------------------------------------------------

LOCKING WITH KEY

To lock or unlock the vehicle, turn the key as
shown.

Manual

To lock the driver’s door, turn the key to-
ward the front of the vehicle

O

1

. To unlock,

turn it toward the rear

O

2

.

LOCKING WITH INSIDE LOCK KNOB

To lock the door without the key, move the
inside lock knob to the lock position

O

1

,

then close the door.

To unlock the door without the key, move
the inside lock knob to the unlock position

O

2

.

LOCKING WITH POWER DOOR
LOCK SWITCH

To lock all the doors without a key, push the
door lock switch (driver's or front passen-
ger's side) to the lock position

O

1

. When

locking the door this way, be certain not to
leave the key inside the vehicle.

To unlock all the doors without a key, push
the door lock switch (driver's or front pas-
senger's side) to the unlock position

O

2

.

LPD2777

Driver’s side

LPD3141

Inside lock

LPD2309

Pre-driving checks and adjustments

3-5

-------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

 

 

 

 

 

Content      ..     8      9      10      11     ..