Nissan Leaf (2022 year). Manual in english - page 19

 

  Index      Manuals     Nissan Leaf (2022 year). Manual in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

 

 

 

Content      ..     17      18      19      20     ..

 

 

 

Nissan Leaf (2022 year). Manual in english - page 19

 

 

If the shift lever is in the P (Park) and D
(Drive) position, the available views are:
• Front view/bird’s-eye view split screen
• Front view/front-side view split screen

The display will switch from the Intelligent
Around View Monitor screen when:
• The shift lever is in the D (Drive) position

and the vehicle speed increases above
approximately 6 mph (10 km/h).

• A different screen is selected.

ADJUSTING THE SCREEN

1. Press MENU button.

2. Touch the “Settings” key

3. Touch the “Camera” key

4. Touch the “Display Settings” key

5. Touch the “Brightness,” “Contrast,” “Tint,”

“Color,” or “Black Level” key.

6. Adjust the item by touching the “+” or “-”

key on the touch-screen display.

NOTE:

Do not adjust any of the display settings
of the Intelligent Around View Monitor
while the vehicle is moving. Make sure
the parking brake is firmly applied.

LHA3522

Monitor, climate, audio, phone and voice recognition systems

4-19

-------------------------------------------------------------------------------------------------------------------------------------------------------------

INTELLIGENT AROUND VIEW
MONITOR SYSTEM LIMITATIONS

WARNING

Listed below are the system limitations
for Intelligent Around View Monitor.
Failure to operate the vehicle in accor-
dance with these system limitations
could result in serious injury or death.

Do not use the Intelligent Around
View Monitor with the outside mir-
rors in the stored position, and make
sure that the rear hatch is securely
closed when operating the vehicle
using the Intelligent Around View
Monitor.

The apparent distance between ob-
jects

viewed

on

the

Intelligent

Around View Monitor differs from the
actual distance.

The cameras are installed on the
front grille, the outside mirrors and
above the rear license plate. Do not
put anything on the vehicle that cov-
ers the cameras.

When washing the vehicle with high
pressure water, be sure not to spray it
around the cameras. Otherwise, wa-
ter may enter the camera unit caus-
ing water condensation on the lens, a
malfunction, fire or an electric shock.

Do not strike the cameras. They are
precision

instruments.

Doing

so

could cause a malfunction or cause
damage resulting in a fire or an elec-
tric shock.

There are some areas where the system
will not show objects and the system does
not warn of moving objects. When in the
front or rear view display, an object below
the bumper or on the ground may not be
viewed

O

1

. When in the bird’s-eye view, a

tall object near the seam

O

2

of the camera

viewing areas will not appear in the
monitor.

The following are operating limitations and
do not represent a system malfunction:
• There may be a delay when switching

between views.

• When the temperature is extremely high

or low, the screen may not display objects
clearly.

• When strong light directly shines on the

camera, objects may not be displayed
clearly.

• The screen may flicker under fluorescent

light.

• The colors of objects on the Intelligent

Around View Monitor may differ some-
what from the actual color of objects.

LHA4529

4-20

Monitor, climate, audio, phone and voice recognition systems

-------------------------------------------------------------------------------------------------------------------------------------------------------------

• Objects on the Intelligent Around View

Monitor may not be clear and the color of
the

object

may

differ

in

a

dark

environment.

• There may be differences in sharpness

between each camera view of the bird’s-
eye view.

• Do not use wax on the camera lens. Wipe

off any wax with a clean cloth that has
been dampened with a diluted mild
cleaning agent, then wipe with a dry
cloth.

System temporarily unavailable

When the “!” icon is displayed on the screen,
there are abnormal conditions in the Intel-
ligent Around View Monitor. This will not
hinder normal driving operation but the
system should be inspected. It is recom-
mended that you visit a NISSAN certified
LEAF dealer for this service.

When the “[X]” icon is displayed on the
screen, the camera image may be receiv-
ing temporary electronic disturbances
from surrounding devices. This will not hin-
der normal driving operation but the sys-
tem should be inspected if it occurs fre-
quently. It is recommended that you visit a
NISSAN certified LEAF dealer for this
service.

LHA4412

LHA4413

Monitor, climate, audio, phone and voice recognition systems

4-21

-------------------------------------------------------------------------------------------------------------------------------------------------------------

SYSTEM MAINTENANCE

CAUTION

Do not use alcohol, benzine or thin-
ner to clean the camera. This will
cause discoloration.

Do not damage the cameras as the
monitor screen may be adversely
affected.

If dirt, rain or snow accumulates on any of
the cameras

O

1

, the Intelligent Around

View Monitor may not display objects
clearly. Clean the camera by wiping with a
cloth dampened with a diluted mild clean-
ing agent and then wiping with a dry cloth.

LHA4527

4-22

Monitor, climate, audio, phone and voice recognition systems

-------------------------------------------------------------------------------------------------------------------------------------------------------------

LHA5349

1. CAMERA button

MOVING OBJECT DETECTION (MOD)
(if so equipped)

Monitor, climate, audio, phone and voice recognition systems

4-23

-------------------------------------------------------------------------------------------------------------------------------------------------------------

WARNING

Failure to follow the warnings and in-
structions for proper use of the Moving
object Detection (MOD) system could
result in serious injury or death.

The MOD system is not a substitute
for proper vehicle operation and is
not designed to prevent contact with
objects

surrounding

the

vehicle.

When maneuvering, always use the
outside mirrors and rearview mirror
and turn and check the surroundings
to ensure it is safe to maneuver.

The system is deactivated at speeds
above 5 mph (8 km/h). It is reacti-
vated at lower speeds.

The MOD system is not designed to de-
tect surrounding stationary objects.

The MOD system can inform the driver of
moving objects near the vehicle when
backing out of garages, maneuvering in
parking lots and in other such instances.

The MOD system detects moving objects
by using image processing technology on
the image shown in the display.

MOD SYSTEM OPERATION

The MOD system will turn on automatically
under the following conditions:
• When the shift lever is in the R (Reverse)

position.

• When vehicle speed decreases below ap-

proximately 5 mph (8 km/h) and the
camera screen is displayed.

The MOD system operates in the following
conditions when the camera view is
displayed:
• When the shift lever is in the P (Park) or N

(Neutral) position and the vehicle is
stopped, the MOD system detects mov-
ing objects in the bird’s-eye view. The
MOD system may not operate if the out-
side mirrors are moving in or out, in the
stowed position, or if either front door is
opened.

LHA4530

Front and bird’s-eye views

4-24

Monitor, climate, audio, phone and voice recognition systems

-------------------------------------------------------------------------------------------------------------------------------------------------------------

• When the shift lever is in the D (Drive)

position and the vehicle speed is below
approximately 5 mph (8 km/h), the MOD
system detects moving objects in the
front view.

• When the shift lever is in the R (Reverse)

position and the vehicle speed is below
approximately 5 mph (8 km/h), the MOD
system detects moving objects in the
rear view. The MOD system will not oper-
ate if the rear hatch is open.

The MOD system does not detect moving
objects in the front-side view. The MOD
icon is not displayed on the screen when in
this view.

When the MOD system detects moving ob-
jects near the vehicle, a chime will be heard
and a yellow frame will be displayed on the
view where the objects are detected. While
the MOD system continues to detect mov-
ing objects, the yellow frame continues to
be displayed.

NOTE:

While the Rear Cross Traffic Alert chime is
beeping, the MOD system does not
chime.

In the bird’s-eye view, the yellow frame

O

1

is

displayed on each camera image (front,
rear, right, left) depending on where mov-
ing objects are detected.

The yellow frame

O

2

is displayed on each

view in the front view and rear view modes.

LHA5191

Rear and bird’s-eye views

LHA5192

Rear and front-side views

LHA5193

Full screen rear view

Monitor, climate, audio, phone and voice recognition systems

4-25

-------------------------------------------------------------------------------------------------------------------------------------------------------------

A blue MOD icon

O

3

is displayed in the view

where the MOD system is operative. A gray
MOD icon is displayed in the view where the
MOD system is not operative.

If the MOD system is turned off, the MOD
icon

O

3

is not displayed.

TURNING MOD ON AND OFF

Some vehicles include the option to allow
the MOD system to be turned on or off in
the vehicle information display.

To turn the MOD system on or off:

1. Use either the

or

menu control

switch on the steering wheel to select
“Settings”.

2. Select “Driver Assistance” and press the

OK button.

3. Select “Parking Aids” and press the OK

button.

4. Toggle ON or OFF “Moving Object” using

the OK button.

MOD SYSTEM LIMITATIONS

WARNING

Listed below are the system limitations
for MOD. Failure to operate the vehicle
in accordance with these system limi-
tations could result in serious injury or
death.

Excessive noise (for example, audio
system volume or open vehicle win-
dow) will interfere with the chime
sound, and it may not be heard.

The MOD system performance will be
limited according to environmental
conditions and surrounding objects
such as:

When there is low contrast be-

tween background and the mov-
ing objects.

When there is a blinking source of

light.

When strong light such as another

vehicle’s headlight or sunlight is
present.

When camera orientation is not in

its usual position, such as when a
mirror is folded.

When there is dirt, water drops or

snow on the camera lens.

When the position of the moving

objects in the display is not
changed.

The MOD system might detect flow-
ing water droplets on the camera
lens, white smoke from the muffler,
moving shadows, etc.

The MOD system may not function
properly depending on the speed, di-
rection, distance or shape of the
moving objects.

If your vehicle sustains damage to
the parts where the camera is in-
stalled, leaving it misaligned or bent,
the sensing zone may be altered and
the MOD system may not detect ob-
jects properly.

When the temperature is extremely
high or low, the screen may not dis-
play objects clearly. This is not a
malfunction.

4-26

Monitor, climate, audio, phone and voice recognition systems

-------------------------------------------------------------------------------------------------------------------------------------------------------------

NOTE:

The blue MOD icon will change to orange
if one of the following has occurred:
• When the system is malfunctioning.
• When the component temperature

reaches a high level (icon will blink).

• When the Rear View camera has de-

tected a blockage (icon will blink).

If the icon light continues to illuminate
orange, have the MOD system checked. It
is recommended that you visit a NISSAN
certified LEAF dealer for this service.

SYSTEM MAINTENANCE

CAUTION

Do not use alcohol, benzine or thin-
ner to clean the camera. This will
cause discoloration.

Do not damage the cameras as the
monitor screen may be adversely
affected.

If dirt, rain or snow accumulates on any of
the cameras

O

1

, the Intelligent Around

View Monitor may not display objects
clearly. Clean the camera by wiping with a
cloth dampened with a diluted mild clean-
ing agent and then wiping with a dry cloth.

LHA4527

Monitor, climate, audio, phone and voice recognition systems

4-27

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Open/close the vents by moving the vent
slide in the appropriate direction.

: This symbol indicates that the vents

are closed.

: This symbol indicates that the vents

are open.

Adjust the air flow direction of the vents by
moving the vent slide (up/down) until the
desired position is achieved.

LHA4514

Side vent

LHA4515

Center Vent

VENTS

4-28

Monitor, climate, audio, phone and voice recognition systems

-------------------------------------------------------------------------------------------------------------------------------------------------------------

WARNING

The air conditioning cooling function
operates

only

when

the

power

switch is in the ON position or when
the READY to drive indicator light is
ON.

Do not leave children or adults who
would normally require the assis-
tance of others alone in your vehicle.
Pets should also not be left alone.
They could accidentally injure them-
selves or others through inadvertent
operation of the vehicle. Also, on hot,
sunny days, temperatures in a closed
vehicle could quickly become high
enough to causes severe or possibly
fatal injuries to people or animals.

Do not use the recirculation mode for
long periods as it may cause the inte-
rior air to become stale and the win-
dows to fog up.

NOTE:
• Odors from inside and outside the ve-

hicle can build up in the air conditioner
unit. Odor can enter the passenger
compartment through the vents.

• When parking, set the heater or air

conditioner controls to turn off air re-
circulation to allow fresh air into the
passenger compartment. This should
help reduce odors inside the vehicle.

The climate control system (air conditioner
and heater functions) can be operated
when the READY to drive indicator light is
illuminated. However, while charging, the
climate control system can be used when
the power switch is in the ON position.

The fan, heater and air conditioning can be
turned on manually, using the timer func-
tion and using the remote climate control
function.

These functions operate in the following
conditions.

Power switch position

LOCK/OFF

ACC

ON

READY to drive

Fan

-

-

Available

Available

Heater and air conditioner

-

-

Available*1

Available

Timer (Climate Ctrl. Timer)

Available

Available

-

-

Remote control*2

Available

Available

-

-

*1: The climate control system will only start when charging is being performed. After charging is complete, it will continue to operate if the EVSE (Electric Vehicle
Supply Equipment) is connected.
*2: Models with Navigation System.

HEATER AND AIR CONDITIONER
(automatic)

Monitor, climate, audio, phone and voice recognition systems

4-29

-------------------------------------------------------------------------------------------------------------------------------------------------------------

NOTE:
• A series of operation sounds may be

heard immediately after climate con-
trol ON/OFF operation. This is not a
malfunction.

• Compressor and motor fan may sud-

denly start to operate during charging
operation. This is not a malfunction.

• Condensation forms inside the air con-

ditioning unit when the air conditioner
is running, and is safely discharged un-
derneath your vehicle. Traces of water
on the ground are therefore normal.
Water may drop underneath the ve-
hicle when climate control is operating.

DISPLAYING CLIMATE CONTROL
SYSTEM STATUS SCREEN (models
with navigation system)

The climate control system status screen
can be displayed as a widget. For details of
the widget, refer to the NissanConnect®
Manual.

NOTE:
• If the READY to drive indicator light is

illuminated and the EVSE (Electric Ve-
hicle Supply Equipment) is connected
to the vehicle, the power switch will
change to the ON position. At the same
time, the climate control system will
stop operating. However, the fan will
continue to operate. If you want to turn
on climate control again, place the
power switch in the OFF position and
then place it in the ON position again
after confirming that the vehicle has
started charging.

• When the power switch is in the ON

position, if the power supply from the
EVSE (Electric Vehicle Supply Equip-
ment) is interrupted due to an electri-
cal outage, etc., the system will operate
in the following ways.

– If it occurs while charging is being

performed:

The climate control system will stop
once. If the power supply is restored
within approximately 5 minutes, the
climate control system will restart.
However, if more than 5 minutes have
elapsed, the climate control system
will not restart.
– If it occurs after charging has finished:
The climate control system will stop.

OPERATING TIPS

• The

automatic

climate

control

is

equipped with sensors as illustrated. The
sensors

O

A

and

O

B

help maintain a con-

stant temperature. Do not put anything
on or around these sensors.

• Power consumption of the climate con-

trol system varies depending on the out-
side temperature and the temperature
set for the climate control system. Power
consumption increases if the interior
temperature is cooled down too much in
summer or if it warmed up too much in
winter. This will result in a reduced driving
range.

SAA2368

4-30

Monitor, climate, audio, phone and voice recognition systems

-------------------------------------------------------------------------------------------------------------------------------------------------------------

• Using the AUTO mode will help reduce

the power consumption of the climate
control.

• When the AUTO button is pressed, the

AUTO indicator illuminates. The
HEAT button indicator or the A/C button
indicator illuminates according to the op-
eration of the climate control system.

• If any of the MODE, A/C,

HEAT,

fan speed control,

front defroster is

pressed when the AUTO indicator illumi-
nates, the AUTO indicator will be turned
off.

• If the charge connector is connected to

the vehicle when it is in the READY to drive
mode and the air conditioner or heater is
on,

the

power

switch

automatically

changes to the ON position. Place the
power switch in the off position to begin
charging. Turn on the desired climate
control function.

• For normal charge, the climate control

system is operative when charging op-
eration is complete. For quick charge
however, the climate control system
stops operating when charging opera-
tion stops.

• The climate control timer or remote cli-

mate control (for models with Navigation
System) may fog up windows depending
on the set temperature or outside
temperature.

• When turning on the seat heater (if so

equipped) switch prior to operating the
climate control timer or the remote cli-
mate control (for models with Navigation
System), the seat heater will also turn on
automatically when the outside tem-
perature is low.

IN-CABIN MICROFILTER

The climate control system is equipped
with an in-cabin microfilter which collects
dirt, dust etc. To make sure the air condi-
tioner heats defogs, and ventilates effi-
ciently, replace the filter regularly. To re-
place the filter, it is recommended that you
visit a NISSAN certified LEAF dealer.

The filter should be replaced if the air
flow decreases significantly or if win-
dows fog up easily when operating the
climate control system.

LVH0005X

Monitor, climate, audio, phone and voice recognition systems

4-31

-------------------------------------------------------------------------------------------------------------------------------------------------------------

AUTOMATIC CLIMATE CONTROL
(models without Navigation
System)

1.

fan speed control dial

2.

intake air control button

3.

front defroster button

4. Climate Ctrl. display

5.

Rear window and outside mirror

(if so equipped) defroster switch

6. Temperature control dial

7. AUTO climate control ON button

8. A/C (air conditioner) button

9. MODE (manual air flow control) button

10.

HEAT button

11. Climate control system OFF button

Automatic operation (AUTO)

The AUTO mode may be used year-round
as the system automatically controls con-
stant temperature, air flow distribution and
fan speed.

1. Press the AUTO button. The AUTO indica-

tor will be illuminated.

2. Turn the temperature control dial to set

the desired temperature.

When any of the following functions are
operated, the AUTO indicator will turn off.
• The

HEAT or A/C button is pressed.

• The fan speed control or ventilator air

flow control is operated.

However, the functions that were not oper-
ated continue operating in AUTO mode.

LHA2890

4-32

Monitor, climate, audio, phone and voice recognition systems

-------------------------------------------------------------------------------------------------------------------------------------------------------------

NOTE:
• If the

fan speed control dial, MODE

button, or

intake air control but-

ton is operated while AUTO is in use, all
the other buttons operate in AUTO
mode.

• While the AUTO indicator is illuminated,

electric power consumption of the air
conditioner can be economized com-
pared to the amount consumed while
the AUTO indicator is not illuminated.

The HEAT indicator light and the A/C indi-
cator light illuminates according to the op-
eration modes of the climate control
system.

Operation
mode

A/C
indicator

HEAT
indicator

Cooling
(HEAT off)

ON

OFF

Heating
(A/C off)

OFF

ON

Manual operation

The manual mode can be used to control
the heater and air conditioner to your de-
sired temperature.

The HEAT indicator light and the A/C indi-
cator light illuminates according to the op-
eration modes.

Operation
mode

A/C
indicator

HEAT
indicator

Cooling
(HEAT off)

ON

OFF

Dehumidi-
fied heating

ON

ON

Heating
(A/C off)

OFF

ON

Ventilation

OFF

OFF

Cooling

1. Press the A/C button to illuminate the

A/C indicator light.

2. Press the

HEAT button to turn off

the HEAT indicator light.

• Do not set the temperature higher

than the outside air temperature. Do-
ing so may prevent the temperature
from being controlled properly.

• A visible mist may be seen coming

from the ventilators in hot, humid con-
ditions as the air is cooled rapidly. This
does not indicate a malfunction.

Dehumidified heating

1. Press the A/C button to illuminate the

A/C indicator light.

2. Press the

HEAT button to illuminate

the HEAT indicator light

NOTE:

Electric power consumption of climate
control increases while A/C button indi-
cator and

HEAT button indicator si-

multaneously illuminate. As a result, the
driving range may be decreased.

Heating (A/C off)

1. Press the

HEAT button to illuminate

the HEAT indicator light.

2. Press the A/C button to turn off the A/C

indicator light.

• Do not set temperature lower than the

outside air temperature. Doing so may
prevent the temperature from being
controlled properly.

• If the windows fog up, use dehumidi-

fied heating instead of the A/C off
heating.

Monitor, climate, audio, phone and voice recognition systems

4-33

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Ventilation

Press the

HEAT button and A/C but-

ton if the indicator lights are on so that
both indicator lights turn off.

NOTE:
• The ventilation mode requires a lower

power consumption, so cruising dis-
tance will increase.

• In ventilation mode, temperature is not

indicated on the air conditioner display.

Dehumidified defrosting/defogging

Press the

front defroster button (the

indicator light will illuminate).
• To remove moisture or fog on the front

window quickly, set the temperature to
the high temperature and the fan speed
to their maximum level.

• After the windshield is cleared, press the

front defroster button again (the in-

dicator light will turn off).

• When the

front defroster button is

pressed, the air conditioner will automati-
cally turn on to defog the windshield.
The outside air recirculation mode will
be selected to improve the defogging
performance.

Fan speed control

Turn the

fan speed control dial to

manually control the fan speed.

Press the AUTO button to change the fan
speed to the automatic mode.

Air flow control

Press the MODE button to change the air
flow mode.

Air flows from the center and
side ventilators.

Air flows from the center and
side ventilators and foot outlets.

Air flows mainly from the foot
outlets.

Air flows from the defroster out-
lets and foot outlets.

Air flows from the defroster
vents.

Temperature control

Turn the temperature control dial to set the
desired temperature.

Recirculation

Press the

intake air control button to

change the air circulation mode. When the
indicator light illuminates, the flowing air is
recirculated inside the vehicle.

When the outside temperature exceeds
70°F (21°C) the air conditioning system may
default to air recirculation mode automati-
cally to reduce overall power consumption.
To exit air recirculation mode, deselect the
air recirculation button (indicator will turn
off) to enter fresh mode.

Fresh air

Press the

intake air control button to

change the air circulation mode. When the
indicator light does not illuminate, the flow-
ing air is drawn from outside the vehicle.

Automatic air intake control

In the AUTO mode, the intake air will be
controlled automatically. When the outside
temperature exceeds 70°F (21°C), the air
conditioning system may default to air re-
circulation mode automatically to reduce
overall power consumption.

4-34

Monitor, climate, audio, phone and voice recognition systems

-------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

 

 

 

 

 

Content      ..     17      18      19      20     ..