Nissan Murano (2022 year). Manual in english - page 23

 

  Index      Manuals     Nissan Murano (2022 year). Manual in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

 

 

 

Content      ..     21      22      23      24     ..

 

 

 

Nissan Murano (2022 year). Manual in english - page 23

 

 

When driving on extremely inclined
surfaces such as higher banked cor-
ners, the VDC system may not oper-
ate properly and the

indicator

light may flash or both the

and

indicator lights may illuminate.

Do not drive on these types of roads.

When driving on an unstable surface
such as a turntable, ferry, elevator or
ramp, the

indicator light may

flash or both the

and

indi-

cator lights may illuminate. This is
not a malfunction. Restart the engine
after driving onto a stable surface.

If wheels or tires other than the
NISSAN

recommended

ones

are

used, the VDC system may not oper-
ate properly and the

indicator

light may flash or both the

and

indicator lights may illuminate.

The VDC system is not a substitute
for winter tires or tire chains on a
snow covered road.

RISE-UP AND BUILD-UP

The system gradually adjusts braking
power during normal braking to help pro-
vide an enhanced brake feel.

BRAKE FORCE DISTRIBUTION

During braking while driving through turns,
the system optimizes the distribution of
force to each of the four wheels depending
on the radius of the turn.

WARNING

The VDC system is designed to help
the driver maintain stability but does
not prevent accidents due to abrupt
steering operation at high speeds or
by careless or dangerous driving
techniques. Reduce vehicle speed
and be especially careful when driv-
ing and cornering on slippery sur-
faces and always drive carefully.

Do not modify the vehicle’s suspen-
sion. If suspension parts such as
shock absorbers, struts, springs, sta-
bilizer bars, bushings and wheels are
not NISSAN recommended for your
vehicle or are extremely deterio-
rated, the VDC system may not oper-
ate properly. This could adversely af-
fect vehicle handling performance,
and the

indicator light may flash

or both the

and

indicator

lights may illuminate.

If brake related parts such as brake
pads, rotors and calipers are not
NISSAN recommended or are ex-
tremely deteriorated, the VDC sys-
tem may not operate properly and
both the

and the

indicator

lights may illuminate.

If engine control related parts are not
NISSAN recommended or are ex-
tremely deteriorated, both the
and

indicator

lights

may

illuminate.

When driving on extremely inclined
surfaces such as higher banked cor-
ners, the VDC system may not oper-
ate properly and the

indicator

light may flash or both the

and

indicator lights may illuminate.

Do not drive on these types of roads.

When driving on an unstable surface
such as a turntable, ferry, elevator or
ramp, the

indicator light may

flash or both the

and

indi-

cator lights may illuminate. This is
not a malfunction. Restart the engine
after driving onto a stable surface.

5-124

Starting and driving

-------------------------------------------------------------------------------------------------------------------------------------------------------------

If wheels or tires other than the
NISSAN

recommended

ones

are

used, the VDC system may not oper-
ate properly and the

indicator

light may flash or both the

and

indicator lights may illuminate.

The VDC system is not a substitute
for winter tires or tire chains on a
snow covered road.

WARNING

Never rely solely on the hill start as-
sist system to prevent the vehicle
from moving backward on a hill. Al-
ways drive carefully and attentively.
Depress the brake pedal when the
vehicle is stopped on a steep hill. Be
especially careful when stopped on a
hill on frozen or muddy roads. Failure
to prevent the vehicle from rolling
backwards may result in a loss of
control of the vehicle and possible
serious injury or death.

The hill start assist system is not de-
signed to hold the vehicle at a stand-
still on a hill. Depress the brake pedal
when the vehicle is stopped on a
steep hill. Failure to do so may cause
the vehicle to roll backwards and
may result in a collision or serious
personal injury.

The hill start assist may not prevent
the vehicle from rolling backwards
on a hill under all load or road condi-
tions. Always be prepared to depress
the brake pedal to prevent the ve-
hicle from rolling backwards. Failure
to do so may result in a collision or
serious personal injury.

When the vehicle is stopped on a hill, the hill
start assist system automatically keeps
the brakes applied. This helps prevent the
vehicle from rolling backward in the time it
takes the driver to release the brake pedal
and apply the accelerator.

Hill start assist will operate automatically
under the following conditions:
• The shift lever is moved to a forward or

reverse gear.

• The vehicle is stopped completely on a

hill by applying the brake.

• The hill grade is above 10%.

The maximum holding time is two sec-
onds. After two seconds the vehicle will be-
gin to roll back and hill start assist will stop
operating completely.

Hill start assist will not operate when the
shift lever is moved to N (Neutral) or P (Park)
or on a flat and level road.

HILL START ASSIST SYSTEM

Starting and driving

5-125

-------------------------------------------------------------------------------------------------------------------------------------------------------------

The sonar (parking sensor) system sounds
a tone to inform the driver of obstacles
near the bumper.

When the “DISPLAY” key is ON, the sonar
view will automatically appear in the center
display.

WARNING

The sonar (parking sensor) system is
a convenience but it is not a substi-
tute for proper parking.

The driver is always responsible for
safety during parking and other ma-
neuvers. Always look around and
check that it is safe to do so before
parking.

Read and understand the limitations
of the sonar (parking sensor) system
as contained in this section. The col-
ors of the corner sonar indicator and
the distance guide lines in the front/
rear view indicate different distances
to the object.

Inclement

weather

or

ultrasonic

sources such as an automatic car
wash,

a

truck's

compressed-air

brakes or a pneumatic drill may af-
fect the function of the system; this
may include reduced performance or
a false activation.

This function is designed as an aid to
the driver in detecting large station-
ary objects to help avoid damaging
the vehicle.

The system is not designed to pre-
vent contact with small or moving
objects. Always move slowly. The
system will not detect small objects
below the bumper, and may not de-
tect objects close to the bumper or
on the ground.

The system may not detect the fol-
lowing objects: fluffy objects such as
snow, cloth, cotton, glass, wool, etc.,
and thin objects such as rope, wire
and chain, etc., or wedge-shaped
objects.

The sonar sensors may cause mal-
function when a horn, etc. sounds or
there is an ultrasonic source (such as
parking sensors of other vehicles)
around the vehicle because the so-
nar sensors detect the distance be-
tween the vehicle and the obstacle
by detecting the sound wave re-
flected

from

the

surface

of

an

obstacle.

If your vehicle sustains damage to the
bumper fascia, leaving it misaligned or
bent, the sensing zone may be altered
causing inaccurate measurement of ob-
stacles or false alarms.

LSD2427

FRONT AND REAR SONAR SYSTEM (if
so equipped)

5-126

Starting and driving

-------------------------------------------------------------------------------------------------------------------------------------------------------------

CAUTION

Excessive noise (such as audio sys-
tem volume or an open vehicle win-
dow) will interfere with the tone and
it may not be heard.

Keep the sonar sensors (located on
the bumper fascia) free from snow,
ice and large accumulations of dirt.
Do not clean the sensors with sharp
objects. If the sensors are covered,
the accuracy of the sonar function
will be diminished.

SYSTEM OPERATION

The system informs with a visual and au-
dible alert of front obstacles when the shift
lever is in the D (Drive) position and both
front and rear obstacles when the shift le-
ver is in the R (Reverse) position.

Sonar Operation Table

FR Sensor

RR Sensor

Range Sound Display Sound

Dis-

play

P

x

x

R

o

o

o

o

N

x

x

D

o

o

x

o – Display/Beep when detect

† – Display on camera view

x – No Display and Beep

The system is deactivated at speeds above
6 mph (10 km/h). It is reactivated at lower
speeds.

While the vehicle is moving the audible alert
will stop after 3 seconds when an obstacle
is detected by only the corner sensor and
distance does not change. The audible
alert will also stop when the obstacle
moves away from the vehicle. At any time
the left side button of the steering wheel (

buttons) is available to cancel the au-

dible alert.

When the object is detected, the indicator
(green) appears and blinks and the tone
sounds intermittently. When the vehicle
moves closer to the object, the color of the
indicator turns yellow and the rate of the
blinking increases. When the vehicle is very
close to the object, the indicator stops
blinking and turns red, and the tone
sounds continuously.

Starting and driving

5-127

-------------------------------------------------------------------------------------------------------------------------------------------------------------

When the corner of the vehicle moves
closer to an object, the corner sonar indi-
cator

O

A

appears.

The system indicators

O

A

will appear when

the vehicle moves closer to an object.

LSD2428

LSD2137

5-128

Starting and driving

-------------------------------------------------------------------------------------------------------------------------------------------------------------

HOW TO ENABLE/DISABLE THE
FRONT AND REAR SONAR SYSTEM

The system is automatically activated
when the ignition is in the ON position and
the shift lever is in the R (Reverse) position.

Perform the following steps to enable or
disable the sonar system:

1. Press the

button until “Settings” ap-

pears in the vehicle information display
and then press OK. Use the

button

to select “Driver Assistance.” Then press
the OK button.

2. Select “Parking Aids” and press the OK

button.

3. Select “Sensor” and press the OK button.

Select “ON,” “OFF,” or “Front Only” and
press the OK button.

• Select “Range” to change the sonar

distance to “Near,” “Mid,” or “Far.”

• Select “Volume” to change the volume

to “High,” “Medium,” or “Low.”

NOTE:

The system automatically turns on every
time the engine is started, as long as it is
activated using the settings menu on
the vehicle information display.

LSD3439

Starting and driving

5-129

-------------------------------------------------------------------------------------------------------------------------------------------------------------

SONAR LIMITATIONS

WARNING

Listed below are the system limitations
for the sonar system. Failure to operate
the vehicle in accordance with these
system limitations could result in seri-
ous injury or death.

The system is deactivated at speeds
above 6 mph (10 km/h). It is reacti-
vated at lower speeds.

Inclement

weather

or

ultrasonic

sources such as an automatic car
wash,

a

truck’s

compressed-air

brakes or a pneumatic drill may af-
fect the function of the system; this
may include reduced performance or
a false activation.

The system is not designed to pre-
vent contact with small or moving
objects. Always move slowly. The
system will not detect small objects
below the bumper or on the ground.

The system may not detect the fol-
lowing objects: fluffy objects such as
snow, cloth, cotton, glass-wool, etc.;
thin objects such as rope, wire and
chain, etc.; or wedge-shaped objects.

The system may not detect objects
at speeds above 3 mph (5 km/h) and
may not detect certain angular or
moving objects.

Do not attach stickers (including
transparent material), install acces-
sories, or apply anything blocking
the sensors. These conditions may
reduce the ability of the system.

SYSTEM TEMPORARILY
UNAVAILABLE

When sonar blockage is detected, the sys-
tem will be deactivated automatically.

The system is not available until the condi-
tions no longer exist.

The sonar sensors may be blocked by tem-
porary ambient conditions such as splash-
ing water, mist or fog. The blocked condi-
tion may also be caused by objects such as
ice, frost or dirt obstructing the sonar
sensors.

Action to take:

When the above conditions no longer exist,
the system will resume automatically.

SYSTEM MAINTENANCE

The sonar sensors

O

A

and

O

B

are located

on the front and rear bumpers. Always
keep the area near the sonar sensors
clean.

LSD4552

5-130

Starting and driving

-------------------------------------------------------------------------------------------------------------------------------------------------------------

The sonar sensors may be blocked by tem-
porary ambient conditions such as splash-
ing water, mist or fog.

The blocked condition may also be caused
by objects such as ice, frost or dirt ob-
structing the sonar sensors.

Check for and remove objects obstructing
the area around the sonar sensors.

Do not attach stickers (including transpar-
ent material), install accessories or apply
additional paint near the sonar sensors.

Do not strike or damage the area around
the sonar sensors. It is recommended that
you visit a NISSAN dealer if the area around
the sonar sensors is damaged due to a
collision.

FREEING A FROZEN DOOR LOCK

To prevent a door lock from freezing, apply
de-icer through the key hole. If the lock
becomes frozen, heat the key before in-
serting it into the key hole, or use the
NISSAN Intelligent Key®.

ANTIFREEZE

In the winter when it is anticipated that the
temperature will drop below 32°F (0°C),
check the antifreeze to assure proper win-
ter protection. For additional information,
see “Engine cooling system” (P. 8-4).

BATTERY

If the battery is not fully charged during
extremely cold weather conditions, the
battery fluid may freeze and damage the
battery. To maintain maximum efficiency,
the battery should be checked regularly.
For additional information, see “Battery”
(P. 8-13).

DRAINING OF COOLANT WATER

If the vehicle is to be left outside without
antifreeze, drain the cooling system, includ-
ing the engine block. Refill before operating
the vehicle. For additional information, see
“Changing engine coolant” (P. 8-5).

TIRE EQUIPMENT

1. SUMMER tires have a tread designed to

provide superior performance on dry
pavement. However, the performance of
these tires will be substantially reduced
in snowy and icy conditions. If you oper-
ate your vehicle on snowy or icy roads,
NISSAN recommends the use of MUD &
SNOW or ALL SEASON TIRES on all four
wheels. It is recommended that you visit
a NISSAN dealer for the tire type, size,
speed rating and availability information.

2. For additional traction on icy roads,

studded tires may be used. However,
some U.S. states and Canadian prov-
inces prohibit their use. Check local,
state and provincial laws before install-
ing studded tires.

Skid and traction capabilities of studded
snow tires on wet or dry surfaces may be
poorer than that of non-studded snow
tires.

3. Tire chains may be used. For additional

information, see “Tire chains” (P. 8-35).

COLD WEATHER DRIVING

Starting and driving

5-131

-------------------------------------------------------------------------------------------------------------------------------------------------------------

SPECIAL WINTER EQUIPMENT

It is recommended that the following items
be carried in the vehicle during winter:
• A scraper and stiff-bristled brush to re-

move ice and snow from the windows
and wiper blades.

• A sturdy, flat board to be placed under the

jack to give it firm support.

• A shovel to dig the vehicle out of

snowdrifts.

• Extra washer fluid to refill the windshield-

washer fluid reservoir.

DRIVING ON SNOW OR ICE

WARNING

Wet ice (32°F, 0°C and freezing rain),
very cold snow or ice can be slick and
very hard to drive on. The vehicle will
have much less traction or “grip” un-
der these conditions. Try to avoid
driving on wet ice until the road is
salted or sanded.

Whatever the condition, drive with
caution. Accelerate and slow down
with care. If accelerating or down-
shifting too fast, the drive wheels will
lose even more traction.

Allow more stopping distance under
these conditions. Braking should be
started

sooner

than

on

dry

pavement.

Allow greater following distances on
slippery roads.

Watch for slippery spots (glare ice).
These may appear on an otherwise
clear road in shaded areas. If a patch
of ice is seen ahead, brake before
reaching it. Try not to brake while on
the ice, and avoid any sudden steer-
ing maneuvers.

Do not use the cruise control on slip-
pery roads.

Snow can trap dangerous exhaust
gases under your vehicle. Keep snow
clear of the exhaust pipe and from
around your vehicle.

5-132

Starting and driving

-------------------------------------------------------------------------------------------------------------------------------------------------------------

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Push the switch on to warn other drivers
when you must stop or park under emer-
gency conditions. All turn signal lights flash.

WARNING

If stopping for an emergency, be sure
to move the vehicle well off the road.

Do not use the hazard warning flashers
while moving on the highway unless
unusual circumstances force you to
drive so slowly that your vehicle might
become a hazard to other traffic.

Turn signals do not work when the
hazard warning flasher lights are on.

The flashers will operate with the ignition
switch placed in any position.

Some jurisdictions may prohibit the use
of the hazard warning flasher switch
while driving.

To shut off the engine in an emergency
situation while driving, perform the follow-
ing procedure:
– Rapidly push the push-button ignition

switch three consecutive times in less
than 1.5 seconds, or

– Push and hold the push-button ignition

switch for more than 2 seconds.

LIC0394

HAZARD WARNING FLASHER SWITCH

EMERGENCY ENGINE SHUT OFF

6-2

In case of emergency

-------------------------------------------------------------------------------------------------------------------------------------------------------------

TIRE PRESSURE MONITORING
SYSTEM (TPMS)

This vehicle is equipped with the Tire Pres-
sure Monitoring System (TPMS). It monitors
tire pressure of all tires except the spare.
When the low tire pressure warning light is
lit, and the “Tire Pressure Low - Add Air”
warning appears in the vehicle information
display, one or more of your tires is signifi-
cantly under-inflated. If equipped, the sys-
tem also displays pressure of all tires (ex-
cept the spare tire) on the display screen by
sending a signal from a sensor that is in-
stalled in each wheel. If the vehicle is being
driven with low tire pressure, the TPMS will
activate and warn you of it by the low tire
pressure warning light. This system will ac-
tivate only when the vehicle is driven at
speeds above 16 mph (25 km/h). For addi-
tional information, see “Warning lights, indi-
cator lights and audible reminders” (P. 2-8)
and “Tire Pressure Monitoring System
(TPMS)” (P. 5-5).

WARNING

Radio waves could adversely affect
electric medical equipment. Those
who use a pacemaker should contact
the

electric

medical

equipment

manufacturer for the possible influ-
ences before use.

If the low tire pressure warning light
illuminates while driving, avoid sud-
den steering maneuvers or abrupt
braking, reduce vehicle speed, pull
off the road to a safe location and
stop the vehicle as soon as possible.
Driving with under-inflated tires may
permanently damage the tires and
increase the likelihood of tire failure.
Serious vehicle damage could occur
and may lead to an accident and
could result in serious personal in-
jury. Check the tire pressure for all
four tires. Adjust the tire pressure to
the recommended COLD tire pres-
sure shown on the Tire and Loading
Information label to turn the low tire
pressure warning light OFF. If the
light still illuminates while driving af-
ter adjusting the tire pressure, a tire
may be flat or the TPMS may be mal-
functioning. If you have a flat tire, re-
place it with a spare tire as soon as

possible. If no tire is flat and all tires
are properly inflated, have the ve-
hicle checked. it is recommended
that you visit a NISSAN dealer for this
service.

When using a wheel without TPMS
such as the spare tire, the TPMS will
not function and the low tire pres-
sure warning light will flash for ap-
proximately one minute. The light
will remain on after one minute. Have
your tires replaced and/or TPMS sys-
tem reset as soon as possible. It is
recommended

that

you

visit

a

NISSAN dealer for these services.

Replacing tires with those not origi-
nally specified by NISSAN could af-
fect the proper operation of the
TPMS.

Do not inject any tire liquid or aerosol
tire sealant into the tires, as this may
cause a malfunction of the tire pres-
sure sensors.

FLAT TIRE

In case of emergency

6-3

-------------------------------------------------------------------------------------------------------------------------------------------------------------

CHANGING A FLAT TIRE

If you have a flat tire, follow the instructions
below:

Stopping the vehicle

1. Safely move the vehicle off the road and

away from traffic.

2. Turn on the hazard warning flashers.

3. Park on a level surface and apply the

parking brake. Move the shift lever to P
(Park).

4. Turn off the engine.

5. Raise the hood to warn other traffic and

to signal professional road assistance
personnel that you need assistance.

6. Have all passengers get out of the ve-

hicle and stand in a safe place, away
from traffic and clear of the vehicle.

WARNING

Make sure the parking brake is se-
curely applied and the shift lever is
shifted into P (Park).

Never change tires when the vehicle
is on a slope, ice or slippery areas.
This is hazardous.

Never change tires if oncoming traf-
fic is close to your vehicle. Wait for
professional road assistance.

Blocking wheels

Place suitable blocks at both the front and
back of the wheel diagonally opposite the
flat tire to prevent the vehicle from moving
when it is jacked up.

WARNING

Be sure to block the wheel as the ve-
hicle may move and result in personal
injury.

LCE2142

A. Blocks

B. Flat tire

6-4

In case of emergency

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Getting the spare tire and tools

1. Open the rear liftgate.

2. Pull up on the handle to lift the carpeted

floorboard and attach the hook as
shown.

3. Open the storage compartment

O

A

by

pulling on the strap to locate the jack
and tools

O

B

.

4. Remove the jack and tools from the

storage area.

5. To remove the spare tire, loosen the bolt

by turning counterclockwise.

6. Once free, remove the bolt.

7. Remove the spare tire.

8. Once the flat tire is exchanged with the

spare tire, store the flat tire where the
spare tire was located.

9. Turn the bolt clockwise to tighten and

place the carpeted floorboard back over
the tire.

LCE2397

LCE2386

WCE0188

In case of emergency

6-5

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Changing the spare tire with
BOSE® subwoofer (if so equipped)

1. To

loosen

the

bolt,

turn

counterclockwise.

2. Once free, remove the bolt.

3. Place the sub-woofer in the lower left

corner of the cargo area, leaning against
the driver side wall.

4. Remove the spare tire.

5. Once the flat tire is exchanged with the

spare tire, store the flat tire where the
spare was located.

NOTE:
You may need to remove the wheel cap
in order to secure the damaged tire us-
ing the spare tire clamp.

6. Place the sub-woofer inside the flat tire.

7. Turn the bolt clockwise to tighten and

place the carpeted floorboard back over
the tire.

LCE2109

LCE2398

6-6

In case of emergency

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Jacking up vehicle and removing
the damaged tire

WARNING

Never get under the vehicle while it is
supported only by the jack. If it is nec-
essary to work under the vehicle,
support it with safety stands.

Use only the jack provided with your
vehicle to lift the vehicle. Do not use
the jack provided with your vehicle
on other vehicles. The jack is de-
signed for lifting only your vehicle
during a tire change.

Use the correct jack-up points. Never
use any other part of the vehicle for
jack support.

Never jack up the vehicle more than
necessary.

Never use blocks on or under the
jack.

Do not start or run the engine while
vehicle is on the jack. It may cause
the vehicle to move. This is especially
true for vehicles with limited slip
differentials.

Do not allow passengers to stay in
the vehicle while it is on the jack.

Never run the engine with a wheel(s)
off the ground. It may cause the ve-
hicle to move.

LCE2184

In case of emergency

6-7

-------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

 

 

 

 

 

Content      ..     21      22      23      24     ..