Nissan Pathfinder (2022 year). Manual in english - page 17

 

  Index      Manuals     Nissan Pathfinder (2022 year). Manual in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

 

 

 

Content      ..     15      16      17      18     ..

 

 

 

Nissan Pathfinder (2022 year). Manual in english - page 17

 

 

NOTE:

Do not hang any objects over the sen-
sors

O

1

or apply glass cleaner to the sen-

sors. Doing so will reduce the sensitivity
of the sensors, resulting in improper
operation.

The indicator light

O

2

will illuminate when

the

automatic

anti-glare

feature

is

operating.

To turn off the automatic anti-glare feature,
press the

O

button. The indicator light

will turn off.

To turn on the automatic anti-glare feature
again, press the

|

button again. The in-

dicator light will turn on.

For additional information on HomeLink®
Universal

Transceiver

operation,

see

“HomeLink® Universal Transceiver” (P. 2-118).

OUTSIDE MIRRORS

The outside mirror remote control will op-
erate only when the ignition switch is in the
ACC or ON position.

Push the switch

O

1

or

O

2

to select the left

or right mirror. Adjust each mirror to the
desired position using the large switch

O

3

.

Push the switch

O

1

or

O

2

and make sure

that the corresponding light is off, to pre-
vent accidentally moving the mirror.

WARNING

Objects viewed in the outside mirror
on the passenger side are closer than
they appear. Be careful when moving
to the right. Using only this mirror
could cause an accident. Use the in-
side mirror or glance over your
shoulder to properly judge distances
to other objects.

Do not adjust the mirrors while driv-
ing. You could lose control of your ve-
hicle and cause an accident.

LPD3166

3-34

Pre-driving checks and adjustments

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Manual folding outside mirrors
(if so equipped)

Pull the outside mirror toward the door to
fold it.

Power folding outside mirrors
(if so equipped)

CAUTION

Do not touch the mirrors while they
are moving. Your hand may be
pinched,

and

the

mirror

may

malfunction.

Do not drive with the mirrors stored.
You will be unable to see behind the
vehicle.

Push the switch

O

1

to open the mirrors.

Push the switch again to close the mirrors.

If one of the mirrors are manually operated
or bumped, the mirror body can become
loose at the pivot point. To correct elec-
tronic mirror operation, cycle the mirrors by
pushing the switch

O

1

until completely

closed, then push the switch again until the
mirrors are in the open position

Heated mirrors (if so equipped)

The electric control type outside mirrors
can be heated to defrost, defog, or de-ice
for improved visibility. For additional infor-
mation, see “Rear window and outside mir-
ror (if so equipped) defroster switch”
(P. 2-77).

Reverse tilt-down feature (if so
equipped)

The reverse tilt-down feature will turn both
outside mirror surfaces downward to pro-
vide better rear visibility close to the vehicle
when the mirror control switch is in either
the L or R position.

The mirrors automatically return to their
original position when you shift out of R
(Reverse).

LPD2112

LPD3186

Pre-driving checks and adjustments

3-35

-------------------------------------------------------------------------------------------------------------------------------------------------------------

The outside mirror surfaces will return to
their original position when one of the fol-
lowing conditions has occurred:
• The shift lever is moved to any position

other than R (Reverse).

• The outside mirror control switch is set to

the neutral or center position.

• The ignition switch is placed in the OFF

position.

NOTE:

If the outside mirror control switch is in
the center position, the mirror surface
will NOT turn downward when the shift
lever is moved to R (Reverse).

For additional information, see “Memory
seat” (P. 3-36).

The

memory

seat

system

has

two

features:
• Memory storage function
• Entry/exit function

MEMORY STORAGE FUNCTION

Two positions for the driver’s seat, steering
wheel (if so equipped), and outside mirrors
can be stored in the memory seat system.
Follow

these

procedures

to

use

the

memory system.

1. Adjust the driver's seat, steering wheel (if

so equipped), and outside mirrors to the
desired positions by manually operating
each adjusting switch. For additional in-
formation, see “Seats” (P. 1-2) and “Steer-
ing wheel” (P. 3-30) and “Outside mirrors”
(P. 3-34).

LPD3165

MEMORY SEAT (if so equipped)

3-36

Pre-driving checks and adjustments

-------------------------------------------------------------------------------------------------------------------------------------------------------------

2. Push the SET switch and, within 5 sec-

onds, push the memory switch (1 or 2).

3. The indicator light for the pushed

memory switch will come on and stay
on for approximately 5 seconds.

4. The chime will sound when the memory

is stored.

NOTE:

If a new memory position is stored in the
same memory switch, the previous
memory position will be overwritten by
the new stored position.

Linking a key fob to a stored
memory position

Each key fob can be linked to a stored
memory position (memory switch 1 or 2)
with the following procedure.

1. Follow steps 1-3 in the “Memory storage

function” section for storing the memory
position.

2. The indicator light for the pushed

memory switch will come on. While the
indicator light is on for 5 seconds, press
the

button on the key fob. The haz-

ard lights will flash twice. The indicator
light of the linked memory switch will
blink and click twice. After the indicator
light goes off, the key fob is linked to that
memory setting.

Once it is linked, when the ignition switch is
in the OFF position, pressing the

but-

ton on the key fob will move the driver’s
seat, steering wheel and outside mirrors to
the linked memory switch position.

NOTE:

If a new memory position is stored in the
linked memory switch, then the key fob
will link the new position and overwrites
the previous position.

Confirming memory storage

• Push the SET switch.
• If a memory position has been stored in

the switch (1 or 2) then the indicator light
for the respective switch will stay on for
approximately 5 seconds.

ENTRY/EXIT FUNCTION

This system is designed so that the driver's
seat and steering wheel will automatically
move when the shift position is in the P
(Park). This allows the driver to easily get in
and out of the driver’s seat.

The driver’s seat will slide backward and
the steering wheel will move up:
• When the driver’s door is opened with the

ignition switch in the OFF position.

• When the ignition switch is changed from

ACC to OFF with the driver’s door open.

The driver’s seat and steering wheel will
return to the previous position:
• When the ignition switch is changed from

ACC or ON while the shift position is in the
P (Park).

The entry/exit function can be adjusted or
canceled through “Vehicle Settings” in the
vehicle information display by performing
the following:
• Switch the Exit Seat Slide from on to off.
• Switch the Exit Steering UP from on to off.

Pre-driving checks and adjustments

3-37

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Restarting the entry/exit function

If the battery cable is disconnected or if the
fuse opens, the stored memory positions
may be lost and some of the functions will
be restricted.

1. Drive the vehicle over 25 mph (40 km/h).

OR

2. Open and close the driver's door more

than two times with the ignition switch
in the OFF position.

The entry/exit function should now work
properly.

SETTING MEMORY FUNCTION

The position of the following settings can
be linked to the Intelligent Key and the
memorized settings can be available for
each Intelligent Key.
• Climate control system
• Audio system

To use the memory function, set the cli-
mate and audio systems to the driver's
preferred settings. Lock the doors with the
Intelligent Key. Each Intelligent Key may be
set with the driver's individual preferences.
When a new Intelligent Key is used, “Con-
nection with the key has been done” will be

displayed on the vehicle information dis-
play and the memorized settings are
available.

To engage the memorized settings, per-
form the following:

1. Carry the Intelligent Key that is linked to

the memorized settings.

2. Unlock the doors by wrapping hand

around the capacitive door handle or
the

button on the Intelligent Key.

3. Place the ignition switch in the ON posi-

tion. The settings linked to the Intelligent
Key will start.

For additional information on using the cli-
mate control system, see “Heater and air
conditioner (automatic)” (P. 4-33).

SYSTEM OPERATION

The memory seat system will not work or
will stop operating under the following
conditions:
• When the vehicle speed is above 4 mph

(7 km/h).

• When any of the memory switches are

pushed

while

the

memory

seat

is

operating.

• When the switch for the driver’s seat and

steering wheel is pushed while the
memory seat is operating.

• When the seat has already been moved

to the memorized position.

• When no seat position is stored in the

memory switch.

• When the shift position is moved from P

(Park) to any other position.

3-38

Pre-driving checks and adjustments

-------------------------------------------------------------------------------------------------------------------------------------------------------------

4 Monitor, climate, audio, phone and
voice recognition systems

NissanConnect® Owner’s Manual . . . . . . . . . . . . . . . 4-2
RearView Monitor (if so equipped) . . . . . . . . . . . . . . . 4-3

RearView Monitor system operation . . . . . . . . . . 4-4
How to read the displayed lines . . . . . . . . . . . . . . 4-4
Difference between predicted and
actual distances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
How to park with predicted course
lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Adjusting the screen . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
How to turn on and off predicted
course lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
RearView Monitor system limitations . . . . . . . . . 4-8
System maintenance . . . . . . . . . . . . . . . . . . . . . . . . 4-9

Intelligent Around View Monitor
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10

Intelligent Around View Monitor system
operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-11
Difference between predicted and
actual distances . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16
How to park with predicted course
lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-17
How to switch the display . . . . . . . . . . . . . . . . . . . 4-18
Adjusting the screen . . . . . . . . . . . . . . . . . . . . . . . . 4-19
Intelligent Around View Monitor system
limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20

System maintenance . . . . . . . . . . . . . . . . . . . . . . . 4-22

Camera aiding sonar (parking sensor)
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22

Sonar system operation . . . . . . . . . . . . . . . . . . . . . 4-23
Turning on and off the sonar function . . . . . . . 4-24
Sonar system limitations . . . . . . . . . . . . . . . . . . . . 4-24
System maintenance . . . . . . . . . . . . . . . . . . . . . . . 4-25

Moving Object Detection (MOD)
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-26

MOD system operation . . . . . . . . . . . . . . . . . . . . . . 4-27
Turning MOD on and off . . . . . . . . . . . . . . . . . . . . . 4-29
MOD system limitations . . . . . . . . . . . . . . . . . . . . . 4-29
System maintenance . . . . . . . . . . . . . . . . . . . . . . . 4-30

Vents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-31
Heater and air conditioner (automatic) . . . . . . . . . 4-32

Automatic operation . . . . . . . . . . . . . . . . . . . . . . . . 4-33
Manual operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-34
Operating tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-36
Rear automatic air conditioning system . . . . . 4-37

Servicing air conditioner . . . . . . . . . . . . . . . . . . . . . . . . 4-39
Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-39
Car phone or CB radio . . . . . . . . . . . . . . . . . . . . . . . . . . 4-40
iPod®/iPhone® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-40

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Refer to the digital NissanConnect® Own-
er’s manual using the QR code on this
page, or your printed NissanConnect®
Owner’s manual (if so equipped). This
manual includes the following information:
• NissanConnect® Services (if so equipped)
• Navigation system (if so equipped)
• Audio system
• Apple CarPlay®
• Android Auto

TM

• Bluetooth® Hands-Free Phone system
• Viewing information
• Other settings

• Voice recognition
• General system information

LHA5506

NISSANCONNECT® OWNER’S
MANUAL

4-2

Monitor, climate, audio, phone and voice recognition systems

-------------------------------------------------------------------------------------------------------------------------------------------------------------

1. CAMERA button

WARNING

Failure to follow the warnings and in-
structions for proper use of the Rear-
View Monitor system could result in
serious injury or death.

RearView Monitor is a convenience
feature and is not a substitute for
proper backing. Always turn and look
out the windows and check mirrors
to be sure that it is safe to move be-
fore operating the vehicle. Always
back up slowly.

The system is designed as an aid to
the driver in showing large station-
ary objects directly behind the ve-
hicle, to help avoid damaging the
vehicle.

LHA5430

REARVIEW MONITOR (if so
equipped)

Monitor, climate, audio, phone and voice recognition systems

4-3

-------------------------------------------------------------------------------------------------------------------------------------------------------------

The distance guide line and the ve-
hicle width line should be used as a
reference only when the vehicle is on
a level paved surface. The distance
viewed on the monitor is for refer-
ence only and may be different than
the actual distance between the ve-
hicle and displayed objects.

CAUTION

Do not scratch the camera lens when
cleaning dirt or snow from the front of
the camera.

The RearView Monitor system automati-
cally shows a rear view of the vehicle when
the shift lever is shifted into the R (Reverse)
position. The radio can still be heard while
the RearView Monitor is active.

To display the rear view, the RearView Moni-
tor system uses a camera located in the
rear bumper

O

1

.

REARVIEW MONITOR SYSTEM
OPERATION

With the ignition switch in the ON position,
move the shift lever to the R (Reverse) po-
sition to operate the RearView Monitor.

HOW TO READ THE DISPLAYED
LINES

Guiding lines which indicate the vehicle
width and distances to objects with refer-
ence to the vehicle body line

O

A

are dis-

played on the monitor.

Distance guide lines

Indicate distances from the vehicle body.
• Red line

O

1

: approx. 1.5 ft (0.5 m)

• Yellow line

O

2

: approx. 3 ft (1 m)

• Green line

O

3

: approx. 7 ft (2 m)

LHA5431

LHA4805

4-4

Monitor, climate, audio, phone and voice recognition systems

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Vehicle width guide lines

O

4

Indicate the vehicle width when backing
up.

Predicted course lines

O

5

Indicate the predicted course when back-
ing up. The predicted course lines will be
displayed on the monitor when the shift
lever is in the R (Reverse) position and the
steering wheel is turned. The predicted
course lines will move depending on how
much the steering wheel is turned and will
not be displayed while the steering wheel is
in the straight-ahead position.

The vehicle width guide lines and the width
of the predicted course lines are wider than
the actual width and course.

DIFFERENCE BETWEEN PREDICTED
AND ACTUAL DISTANCES

The displayed guidelines and their loca-
tions on the ground are for approximate
reference only. Objects on uphill or downhill
surfaces or projecting objects will be actu-
ally located at distances different from
those displayed in the monitor relative to
the guidelines (refer to illustrations). When
in doubt, turn around and view the objects
as you are backing up, or park and exit the
vehicle to view the positioning of objects
behind the vehicle.

Backing up on a steep uphill

When backing up the vehicle up a hill, the
distance guide lines and the vehicle width
guide lines are shown closer than the ac-
tual distance. Note that any object on the
hill is further than it appears on the
monitor.

Backing up on a steep downhill

When backing up the vehicle down a hill,
the distance guide lines and the vehicle
width guide lines are shown farther than
the actual distance. Note that any object
on the hill is closer than it appears on the
monitor.

LHA5432

LHA5433

Monitor, climate, audio, phone and voice recognition systems

4-5

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Backing up near a projecting
object

The predicted course lines

O

A

do not touch

the object in the display. However, the ve-
hicle may hit the object if it projects over
the actual backing up course.

Backing up behind a projecting
object

The position

O

C

is shown farther than the

position

O

B

in the display. However, the po-

sition

O

C

is actually at the same distance as

the position

O

A

. The vehicle may hit the

object when backing up to the position

O

A

if the object projects over the actual back-
ing up course.

HOW TO PARK WITH PREDICTED
COURSE LINES

WARNING

If the tires are replaced with different
sized tires, the predicted course lines
may be displayed incorrectly.

On a snow-covered or slippery road,
there may be a difference between
the predicted course line and the ac-
tual course line.

If the battery is disconnected or be-
comes discharged, the predicted
course lines may be displayed incor-
rectly. If this occurs, please perform
the following procedures:

Turn the steering wheel from lock
to

lock

while

the

engine

is

running.

Drive the vehicle on a straight road
for more than 5 minutes.

When the steering wheel is turned
with the ignition switch in the ACC
position, the predicted course lines
may be displayed incorrectly.

LHA4995

LHA5434

4-6

Monitor, climate, audio, phone and voice recognition systems

-------------------------------------------------------------------------------------------------------------------------------------------------------------

1. Visually check that the parking space is

safe before parking your vehicle.

2. The rear view of the vehicle is displayed

on the screen

O

A

when the shift lever is

moved to the R (Reverse) position.

3. Slowly back up the vehicle adjusting the

steering wheel so that the predicted
course lines

O

B

enter the parking space

O

C

.

4. Maneuver the steering wheel to make

the vehicle width guide lines

O

D

parallel

to the parking space

O

C

while referring

to the predicted course lines.

5. When the vehicle is parked in the space

completely, move the shift lever to the P
(Park) position and apply the parking
brake.

LHA5043

LHA4770

Monitor, climate, audio, phone and voice recognition systems

4-7

-------------------------------------------------------------------------------------------------------------------------------------------------------------

ADJUSTING THE SCREEN

1. Press the CAMERA button.

2. Touch the “Display Settings” key.

3. Touch the “Brightness”, “Contrast”, Tint”,

“Color”, or “Black Level” key.

4. Adjust the item by touching the “+” or “–”

key on the touch-screen display.

NOTE:

Do not adjust any of the display settings
of the RearView Monitor while the ve-
hicle is moving.

HOW TO TURN ON AND OFF
PREDICTED COURSE LINES

To toggle on and off the predicted course
lines while in the P (Park) position:

1. Press the CAMERA button.

2. Touch the “Predicted Course Lines” key

to turn the feature on or off.

REARVIEW MONITOR SYSTEM
LIMITATIONS

WARNING

Listed below are the system limitations
for RearView Monitor. Failure to oper-
ate the vehicle in accordance with
these system limitations could result in
serious injury or death.

The system cannot completely elimi-
nate blind spots and may not show
every object.

Underneath the bumper and the cor-
ner areas of the bumper cannot be
viewed on the RearView Monitor be-
cause of its monitoring range limita-
tion. The system will not show small
objects below the bumper, and may
not show objects close to the bum-
per or on the ground.

Objects

viewed

in

the

RearView

Monitor differ from actual distance
because a wide-angle lens is used.

Objects in the RearView Monitor will
appear visually opposite compared
to when viewed in the rearview and
outside mirrors.

Use the displayed lines as a refer-
ence. The lines are highly affected by
the number of occupants, fuel level,
vehicle position, road conditions and
road grade.

Make sure that the liftgate is securely
closed when backing up.

Do not put anything on the rearview
camera. The rearview camera is in-
stalled in the rear bumper.

When washing the vehicle with high
pressure water, be sure not to spray it
around the camera. Otherwise, water
may enter the camera unit causing
water condensation on the lens, a
malfunction, fire or an electric shock.

Do not strike the camera. It is a preci-
sion instrument. Otherwise, it may
malfunction or cause damage result-
ing in a fire or an electric shock.

LHA3522

4-8

Monitor, climate, audio, phone and voice recognition systems

-------------------------------------------------------------------------------------------------------------------------------------------------------------

The following are operating limitations and
do not represent a system malfunction:
• When the temperature is extremely high

or low, the screen may not clearly display
objects.

• When strong light directly shines on the

camera, objects may not be displayed
clearly.

• Vertical lines may be seen in objects on

the screen. This is due to strong reflected
light from the bumper.

• The screen may flicker under fluorescent

light.

• The colors of objects on the RearView

Monitor may differ somewhat from the
actual color of objects.

• Objects on the monitor may not be clear

in a dark environment.

• There may be a delay when switching

between views.

• If dirt, rain or snow accumulate on the

camera, the RearView Monitor may not
display objects clearly. Clean the camera.

• Do not use wax on the camera lens. Wipe

off any wax with a clean cloth dampened
with a diluted mild cleaning agent, then
wipe with a dry cloth.

SYSTEM MAINTENANCE

CAUTION

Do not use alcohol, benzine or thin-
ner to clean the camera. This will
cause discoloration.

Do not damage the camera as the
monitor screen may be adversely
affected.

If dirt, rain or snow accumulates on the
camera

O

1

, the RearView Monitor may not

display objects clearly. Clean the camera
by wiping it with a cloth dampened with a
diluted mild cleaning agent and then wip-
ing it with a dry cloth.

LHA5431

Monitor, climate, audio, phone and voice recognition systems

4-9

-------------------------------------------------------------------------------------------------------------------------------------------------------------

1. CAMERA button

LHA5435

INTELLIGENT AROUND VIEW
MONITOR (if so equipped)

4-10

Monitor, climate, audio, phone and voice recognition systems

-------------------------------------------------------------------------------------------------------------------------------------------------------------

WARNING

Failure to follow the warnings and in-
structions for the proper use of the
Intelligent Around View Monitor sys-
tem could result in serious injury or
death.

The Intelligent Around View Monitor
is a convenience feature and is not a
substitute for proper vehicle opera-
tion because it has areas where ob-
jects cannot be viewed. The four cor-
ners of the vehicle in particular, are
areas where objects do not always
appear in the bird’s-eye, front, or rear
views. Always check your surround-
ings to be sure that it is safe to move
before operating the vehicle. Always
operate the vehicle slowly.

The driver is always responsible for
safety during parking and other
maneuvers.

CAUTION

Do not scratch the camera lens when
cleaning dirt or snow from the front of
the camera.

The Intelligent Around View Monitor sys-
tem is designed as an aid to the driver in
situations such as slot parking or parallel
parking.

The monitor displays various views of the
position of the vehicle in a split screen for-
mat. Not all views are available at all times.

Available views:

• Front View

A view of the front of the vehicle.

• Rear View

A view of the rear of the vehicle.

• Bird's-Eye View

The surrounding view of the vehicle from
above.

• Front-Side View

The view around and ahead of the front
passenger's side wheel.

• Front-Wide View

A wider area view of the front view.

• Rear-Wide View

A wider area view of the rear view.

To display the multiple views, the Intelligent
Around View Monitor system uses cam-
eras located in the front grille, on the vehi-
cle’s outside mirrors and in the rear bum-
per

O

1

.

INTELLIGENT AROUND VIEW
MONITOR SYSTEM OPERATION

With the ignition switch in the ON position,
move the shift lever to the R (Reverse) po-
sition or press the CAMERA button to oper-
ate the Intelligent Around View Monitor.

LHA5436

Monitor, climate, audio, phone and voice recognition systems

4-11

-------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

 

 

 

 

 

Content      ..     15      16      17      18     ..