Nissan Rogue (2022 year). Manual in english - page 8

 

  Index      Manuals     Nissan Rogue (2022 year). Manual in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

 

 

 

Content      ..     6      7      8      9     ..

 

 

 

Nissan Rogue (2022 year). Manual in english - page 8

 

 

ROUTE GUIDANCE

ABOUT ROUTE GUIDANCE

After setting the route, select [Start] to
start the route guidance.

During route guidance, the system navi-
gates you through the guide points using
visual and voice guidance.

WARNING

.

The navigation system’s visual and
voice guidance is for reference
purposes only. The contents of
the guidance may be inappropri-
ate depending on the situation.

.

Follow all traffic regulations when
driving along the suggested route
(e.g., one-way traffic).

“Route guidance” (page 6-41)
“Route guidance” (page 6-53)

Voice guidance during route gui-
dance

Basics of voice guidance:

Voice guidance announces which direc-
tion to turn when approaching an inter-
section for which a turn is necessary.

INFO:

.

There may be some cases in which
voice guidance and actual road con-
ditions do not correspond. This may
occur because of discrepancies be-
tween the actual road and the infor-
mation on the map data, or may also
be due to the vehicle speed.

.

In case voice guidance does not cor-
respond to the actual road conditions,
follow the information obtained from
traffic signs or notices on the road.

.

Route guidance provided by the navi-
gation system does not take carpool
lane driving into consideration, espe-
cially when carpool lanes are sepa-
rated from other road lanes.

.

The system will announce street
names when the system language is
set to English. Street names are not
announced when the system is set to
French or Spanish.

.

When approaching a guide point (in-
tersection or corner) or destination/
waypoint during route guidance, voice
guidance announces the remaining
distance and/or turning direction.
Push and hold

<MAP>

to repeat voice

guidance.

ROUTE MENU

WARNING

Always stop the vehicle in a safe
location before modifying the route
conditions. Modifying the route con-
ditions while driving may cause an
accident.

During route guidance, the route condi-
tions can be modified and the route
information can be confirmed. Set route
conditions according to your personal
preference.

Push

<MAP>

when a destination is set,

and then touch [Route] on the Launch Bar.

The route menu screen is displayed.

6. Navigation (if so equipped)

6-13

-------------------------------------------------------------------------------------------------------------------------------------------------------------

6. Navigation (if so equipped)

Available settings

Menu item

Result

[Cancel Route]

Cancels the current route guidance.

[Turn List]

Displays the details of the suggested route.

[Detour]

A detour of a specified distance can be calculated.

[Route Preference]

Set the route search conditions.

“Route Preference” (page 6-16)

[Recalculate]

Manually search for the route again after changing the search
conditions, etc. and have the system calculate a route.

“Recalculating route” (page 6-19)

[Show Destination]

[Move Location]

Displays a map screen and allows the location of the destination to be
adjusted.

[Nearby POIs]

Search for points of interest near the destination, such as restaurants
and gas stations, etc. The location can be set as a waypoint.

[Save Location]

Save the destination in the Address Book.

[Edit/Add to Route]

A destination or waypoint can be edited/added to a route that has
already been set.

“Editing route” (page 6-19)

[Guidance Settings]

Various guidance settings can be customized.

“Guidance settings” (page 6-22)

[Save Route]

The current route (a destination and waypoints) can be saved. A
maximum of 10 routes can be saved. The saved routes can easily be
recalled for future use. Saved route includes only the location
information, not the route itself. Route may vary depending on the
traffic information or other conditions.

[Map Scroll]

Displays the current map screen which can be scrolled to confirm the
location of the destination, waypoints, route, etc.

6-14

-------------------------------------------------------------------------------------------------------------------------------------------------------------

[Simulation]

Simulates the route guidance. This function provides a detailed image
of the route with voice guidance.
The following operations are available:
[

]: Pauses the simulation.

[

]: Resumes the simulation.

[

]: Ends the simulation.

[

]: Increases the play speed.

[

]: Decrease the play speed.

6. Navigation (if so equipped)

6-15

-------------------------------------------------------------------------------------------------------------------------------------------------------------

6. Navigation (if so equipped)

ROUTE PREFERENCE

It is possible to set the conditions of the route search.

1.

Touch [Settings] on the Launch Bar.

2.

Touch [Navigation] and touch [Route Preference].

3.

Touch the item you would like to set.

Available items may vary depending on models, specifications and software versions.

Setting Item

Action

[Basic Route Type]

[Fastest Route]

Prioritizes the use of fastest route.

[Energy-Saving]

Prioritizes a route which uses less energy.

[Shortest Distance]

Prioritizes the shortest route.
The route may not be the shortest because the system
prioritizes roads that are easy to drive on for safety
reasons.

[Other Routing
Choices]

[Minimize Freeway]

Minimizes the use of freeways.

[Minimize Toll Roads]

Minimizes the use of toll roads.

[Time Restricted
Roads]

[Use Restriction Info]

Calculates route taking time restriction information into
consideration.

[Do Not Use Restriction Info]

Calculates route without taking time restriction informa-
tion into consideration.

[Avoid]

Calculates route avoiding the use of time restricted roads.

[Seasonal Restricted
Roads]

[Use Restriction Info]

Calculates route taking seasonal restriction information
into consideration.

[Do Not Use Restriction Info]

Calculates route without taking seasonal restriction
information into consideration.

[Avoid]

Calculates route avoiding the use of seasonal restricted
roads.

6-16

-------------------------------------------------------------------------------------------------------------------------------------------------------------

[Use Traffic Informa-
tion]

[Auto]

Calculates the route automatically taking traffic informa-
tion into consideration.

[Accept]

If a traffic jam or incident occurs, a confirmation screen will
appear before calculation.

[OFF]

Calculates the route without taking traffic information
into consideration.

[Use Avoid Area Settings]

When enabled, the system avoids the previously defined
avoid areas.

[Use Ferries]

Includes the use of ferries.

[Use Unpaved Roads]

Includes the use of unpaved roads.

[Use HOV Lanes]

Includes the use of HOV lanes.

[Use Learned Routes]

Uses the roads that are most frequently traveled with the
help of self-learning technology.

[Customize More
Routes]

[3types]

Calculates 3 types of route when confirming other routes.

[1type]

Calculates an alternative route when confirming other
routes.

[Estimated Time]

[Destination]

Displays the estimated time of arrival or remaining time to
the destination during route guidance.

[Waypoint]

Displays the estimated time of arrival or remaining time to
the waypoint during the route guidance.

[Time Shown on
Map]

[ETA]

Displays the estimated time of arrival.

[Remaining]

Displays the remaining time to arrival.

6. Navigation (if so equipped)

6-17

-------------------------------------------------------------------------------------------------------------------------------------------------------------

6. Navigation (if so equipped)

INFO:

.

If the vehicle greatly deviates from the suggested route, the system calculates a new route.

.

Traffic jam information displayed on the map screen is not statistical traffic information.

.

If [Do Not Use Restriction Info] is selected for [Time Restricted Roads] setting, the system calculates a route without any
consideration of the regulations concerning the time or day of the week. Therefore, the suggested route may include a road
subject to traffic regulations concerning the time or day of the week. When driving along the route, always follow all traffic
regulations regardless of whether [Time Restricted Roads] is set to be considered or not.

.

Even when [Use Traffic Information] is turned on, if traffic information has not been provided for the area, a detour may not always
be indicated in a location where a traffic jam occurs.

.

The system calculates to reduce the time required for the entire route from the start to the destination. If there are no appropriate
routes, the system may lead to a route where a traffic jam occurs instead of leading to a detour.

.

The system may not lead to a detour if the traffic closure or a traffic jam occurs far from the present location.

6-18

-------------------------------------------------------------------------------------------------------------------------------------------------------------

RECALCULATING ROUTE

A route can be manually searched again
after changing the search conditions, etc.

1.

Push

<MAP>

and then touch [Route]

on the Launch Bar.

2.

Touch [Recalculate]. A message is
displayed and the route is recalcu-
lated.

3.

Touch [Start] or conduct other opera-
tions as necessary.

“Options before starting the route
guidance” (page 6-12)

INFO:

.

When a waypoint has been set on the
route, the system will search for only
one route, even if route recalculation is
performed.

.

When the vehicle deviates from the
suggested route, the route from the
current location to the destination is
automatically searched again by the
Auto Reroute function.

EDITING ROUTE

1.

Push

<MAP>

and then touch [Route]

on the Launch Bar.

2.

Touch [Edit/Add to Route].

3.

Edit the following settings and touch
[Calculate].

Available settings

[Add Destination]:

Touch to add a new destination.

Current destination:

Touch to edit or delete the destina-
tion.

“Editing/deleting destination or
waypoint” (page 6-20)

Criteria for calculating a route to the
destination/waypoint:

Touch to change the conditions for
route calculation.

“Changing route calculation con-

ditions” (page 6-20)

[Add Waypoint]:

Touch to add a waypoint.

“Setting destination or waypoint”
(page 6-19)

Current waypoint:

Touch to edit or delete the waypoint.

“Editing/deleting destination or
waypoint” (page 6-20)

[Calculate]:

After editing the route, touch to
recalculate a route with new condi-
tions.

Setting destination or waypoint

A destination or waypoint can be added to
a route that has already been set. Up to 20
waypoints besides one destination can be
set.

1.

Push

<MAP>

and then touch [Route]

on the Launch Bar.

2.

Touch [Edit/Add to Route].

3. Touch [Add Destination] or [Add Way-

point].

6. Navigation (if so equipped)

6-19

-------------------------------------------------------------------------------------------------------------------------------------------------------------

6. Navigation (if so equipped)

INFO:

If [Add Destination] is selected, the
current destination changes to a way-
point.

4. Set a destination or waypoint. The

method of searching for a destination
or waypoint is the same as the one for
a destination.

“Setting destination” (page 6-10)

5. Touch [Add to Route] to add the

location to the route.

6. The route information with the se-

lected location added to the route is
displayed. Adjust the route calculation
conditions as necessary.

“Changing route calculation con-
ditions” (page 6-20)

7.

Touch [Calculate] to confirm the route
change. The route will be recalculated.

INFO:

The prior route will be deleted automati-
cally.

Editing/deleting destination or
waypoint

A destination or waypoint that has al-
ready been set can be modified or deleted.

1.

Push

<MAP>

and then touch [Route]

on the Launch Bar.

2.

Touch [Edit/Add to Route].

3.

Touch a destination or waypoint that
is already set.

4. Touch to edit the following settings:

Available settings

.

[Delete]:

A selected destination or waypoint
that has already been set can be
deleted.

.

[Change Order]:

The order of a destination and
waypoints that are already set can
be changed.

.

[Move Dest.]:

The location of the destination or
waypoint can be adjusted by mov-
ing the cross pointer across the
map on the touch screen display.

5. Touch [Calculate] to apply the change.

INFO:

If the destination is deleted, the route
guidance will be canceled.

Changing route calculation con-
ditions

Each section of the route between way-
points can have different route calcula-
tion conditions.

1.

Push

<MAP>

and then touch [Route]

on the Launch Bar.

2.

Touch [Edit/Add to Route].

3. Touch the route condition shown on

the preferred section of the route to
the destination or waypoint.

4. Touch the preferred condition.

“Route Preference” (page 6-16)

5. The conditions are changed and the

display returns to the edit route
screen.

6-20

-------------------------------------------------------------------------------------------------------------------------------------------------------------

6. Touch [Calculate] to apply the change.

INFO:

The recalculated route may not be the
shortest route because the system prior-
itizes roads that are easy to drive on for
safety reasons.

Changing order of destination
and waypoints

The order of a destination and waypoints
that are already set can be changed.

1.

Push

<MAP>

and then touch [Route]

on the Launch Bar.

2.

Touch [Edit/Add to Route].

3.

Touch a destination or waypoint that
is already set.

4. Touch [Change Order].

5. Touch a preferred destination or way-

point to replace the previously se-

lected destination or waypoint.

6. Touch [Calculate] to apply the change.

6. Navigation (if so equipped)

6-21

-------------------------------------------------------------------------------------------------------------------------------------------------------------

6. Navigation (if so equipped)

GUIDANCE SETTINGS

Various settings are available to customize the guidance information provided by the system.

1.

Touch [Settings] on the Launch Bar.

2.

Touch [Navigation] and touch [Guidance Settings].

3.

Touch an item you would like to set.

Setting item

Action

[Guidance Volume]

Adjusts the volume level of voice guidance.

[Guidance Voice]

Activates or deactivates voice guidance.

[Traffic Announcement]

Activates or deactivates the traffic announcement.
When this item is activated, the system provides an announcement of traffic
information or events on the route. The indicator illuminates if traffic announcement
is activated.

[Toll Booth Guide]

Activates or deactivates the function to notify that the vehicle is approaching a toll
booth.

INFO:

.

[Guidance Settings] can also be accessed from the route menu screen.

“Route menu” (page 6-13)

.

The guidance volume can also be adjusted by turning

<VOL/PUSH POWER>

/

<

/VOL>

/

<VOL/PUSH

>

or pushing

<

>

on the

steering wheel while voice guidance is being announced.

6-22

-------------------------------------------------------------------------------------------------------------------------------------------------------------

VIEWING TRAFFIC INFORMA-
TION

Two types of traffic information are avail-
able on this system, SiriusXM Traffic

TM

Information and Premium Traffic Informa-
tion.

To Activate SiriusXM Traffic

TM

Information,

set [Use Premium Traffic] off.

To Activate Premium Traffic Information,
set [Use Premium Traffic] on.

“Traffic information setting”
(page 6-26)

SiriusXM Traffic

TM

(if so equipped)

SiriusXM Traffic

TM

information is a sub-

scription service offered by SiriusXM®
Satellite Radio.

This service provides real-time informa-
tion regarding traffic flow, accidents, road
construction and other incidents, where
available.

SiriusXM Traffic

TM

combines information

from commercial and public traffic data
providers including government depart-
ments of transportation, police, emer-
gency services, road sensors, cameras
and aircraft reports. The traffic informa-
tion is broadcast to the vehicle by the
SiriusXM® satellites. Available traffic infor-
mation on the route the driver selected is

shown on the navigation screen so traffic
conditions between you and the destina-
tion are known. Three types of real-time
traffic information for major roadways are
shown on the navigation system:

* Unscheduled traffic data, for example,
accidents and disabled vehicles.

* Scheduled traffic data, for example, road
construction and road closures.

* Traffic flow information (rate of speed
data).

WARNING

SiriusXM Traffic

TM

information is not a

substitute for attentive driving. Traffic
conditions change constantly and
emergency situations can arise with-
out warning. Relying only on SiriusXM
Traffic

TM

information may lead to a

collision and could result in serious
personal injury.

NOTE:

.

Turn [Use Premium Traffic] off when
receiving SiriusXM Traffic

TM

informa-

tion.

“Traffic information setting”
(page 6-26)

.

Flow information is provided only for
roads equipped with traffic sensors
and is not available in all markets
covered by the service. Flow data
may not be available on portions of a
road that is under construction.

.

A SiriusXM Traffic

TM

subscription is

necessary to view Traffic Info.

Notes on SiriusXM Traffic

TM

infor-

mation

.

The SiriusXM Traffic

TM

information

service is not provided for some cities.
In addition, the cities for which the
traffic information service is provided
may be changed.

.

In some cases, infrastructure pro-
blems may prevent the complete dis-
play of the traffic information. This is
not a malfunction.

.

Depending on the traffic information, a
detour route may be slower than the
original route.

6. Navigation (if so equipped)

6-23

-------------------------------------------------------------------------------------------------------------------------------------------------------------

6. Navigation (if so equipped)

.

SiriusXM® Satellite Radio and SiriusXM
Traffic

TM

subscriptions are sold sepa-

rately or as a package, and are con-
tinuous until you call SiriusXM® to
cancel. See SiriusXM® Customer
Agreement for complete terms at the
SiriusXM® website.

SiriusXM® website:

For U.S.

www. siriusxm.com

For Canada

www.siriusxm.ca (English)

www.siriusxm.ca/fr (French)

.

SiriusXM® Travel Link is available in
select markets. For more information,
refer to the SiriusXM® website or call
Listener Care.

SiriusXM® website:

For U.S.

www.siriusxm.com/traffic

For Canada

https://www.siriusxm.ca/siriusxm-
infotainment (English)

https://www.siriusxm.ca/fr/siriusxm-
infodivertissement (French)

Listener Care:

For U.S.

1-877-447-0011

For Canada

1-877-438-9677

.

SiriusXM Traffic

TM

is available in over

130 metropolitan markets. For the
most current list of markets covered,
please refer to the SiriusXM® website
or call Listener Care.

SiriusXM® website:

For U.S.

www.siriusxm.com/siriusxmtraffic

For Canada

https://www.siriusxm.ca/siriusxm-
infotainment (English)

https://www.siriusxm.ca/fr/siriusxm-
infodivertissement (French)

Listener Care:

For U.S.

1-877-447-0011

For Canada

1-877-438-9677

.

Due to road maintenance, infrastruc-
ture problems (e.g. malfunction of
road sensors, outage of central com-
puter of infrastructure) or natural dis-

asters, there are times when some or
all traffic information may not be
available.

.

Incident information is based on hu-
man collection. Not all incidents that
have happened are collected and
provided.

.

Due to the coverage and quality of
traffic information and road condi-
tions, it is not always possible for the
system to provide the shortest time
route even when traffic information is
considered.

.

Traffic information that is displayed
may differ from information from
other media (e.g., radio), as other
media may use different information
sources.

PREMIUM TRAFFIC INFORMATION

Real-time traffic information can also be
obtained from Premium Traffic informa-
tion with more street coverage.

The types of event displayed on the
screen are the same as SiriusXM Traffic

TM

Information.

Premium Traffic information is available
by turning [Use Premium Traffic] on and
connecting a Wi-Fi device or connecting a
s m a r t p h o n e t h r o u g h W i - F i ( i f s o

6-24

-------------------------------------------------------------------------------------------------------------------------------------------------------------

equipped).

“Traffic information setting”
(page 6-26)

INFO:

You can also use the Premium Traffic
Information when a Door to Door Naviga-
tion enabled smartphone is connecting to
the vehicle.

VIEWING AVAILABLE TRAFFIC IN-
FORMATION

Viewing traffic events from list

1.

Push

<MENU>

and then touch [Info] on

the Launch Bar.

2.

Touch [SXM Traffic] or [Premium Traf-
fic]. A list of available types of informa-
tion is displayed.

Available
items

Function

[Show the
Traffic on
the Route]

Displays a list of traffic infor-
mation found on the route
from the current vehicle loca-
tion to the destination. Avail-
able only when a route is set.

[Nearby
Traffic
Info]

Displays a list of available
traffic information around the
current vehicle location.

INFO:

[SXM Traffic] or [Premium Traffic] is
available only when the traffic infor-
mation is received.

3. Touch the preferred item. A list of

available events are displayed.

4. Touch an event from the list to check

the detailed information and the map.
Touch [Avoid] to search for an alter-
nate route.

Displaying urgent traffic informa-
tion

When an urgent event is found around the
current vehicle location, a message pops
up automatically on the touch screen
display with a voice announcement.

The message includes the icon, event
type, event information and the direct
distance from the current location to the
event.

INFO:

.

When there are multiple urgent events,
the event with the shortest direct
distance from the current location is
displayed.

.

If the urgent event is on the recom-
mended route, and if a detour is found,
the detour route notification screen is
displayed when the vehicle ap-
proaches the detour point.

Traffic information on map

Traffic information is displayed on both 2D
and 3D map screens.

Screen information

Example

6. Navigation (if so equipped)

6-25

-------------------------------------------------------------------------------------------------------------------------------------------------------------

6. Navigation (if so equipped)

Road conditions
Free Flow: Green
Slow traffic: Yellow
Heavy traffic: Red
Road closed and section affected by
serious traffic event: Orange and
white stripes
Queuing traffic: Orange (Premium
Traffic information only)

Traffic information icon:
If a route is not already set, all of the
traffic information icons on the map
screen are displayed in gray. When a
route is already set, the icons on the
route are displayed in color, and the
icons outside the route are displayed
in gray.

: Traffic jam

: Slow traffic

: Traffic flowing freely

: Road closed

: Accident

: Road work

: Narrow lanes

: All other events

Remaining distance and estimated
remaining time to the destination/
time of arrival calculated with con-
sideration of traffic information on
route.
Whether to display the remaining
time to the destination or estimated
arrival time at the destination can be
selected.

“Route Preference” (page 6-16)

Traffic indicator:

SiriusXM Traffic

TM

Displayed when there is available
SiriusXM Traffic

TM

Information re-

ceived.

Premium Traffic

Displayed when there is available
Premium Traffic Information re-
ceived.
A SiriusXM Traffic

TM

subscription is

necessary to view traffic information.

INFO:

Traffic icons are displayed in the scale
level of 1/64 miles (15 m) - 7.5 miles (12.5
km) range. Some traffic icons are dis-
played only on the map at higher detail
levels.

TRAFFIC INFORMATION SETTING

Settings for traffic information related
functions can be changed.

1.

Touch [Settings] on the Launch Bar.

2.

Touch [Navigation].

3. Touch [Traffic Info Settings].

4. Touch the preferred setting. The in-

dicator for the selected setting illumi-
nates.

Available setting items may vary depend-
ing on models, specifications and soft-
ware versions.

Available setting items

.

[Use Premium Traffic]:
Turns the Premium Traffic information
on/off.

.

[Filter Traffic Icons]:
Selects which types of traffic incidents
(e.g., accident) will be displayed on the
map screen.

6-26

-------------------------------------------------------------------------------------------------------------------------------------------------------------

INFO:

Even when [Traffic Announcement] is set
to off, the route guidance will not be
affected. Also, the announcement of
emergency information and weather in-
formation will not be turned off.

“Guidance settings” (page 6-22)

STORING A LOCATION/ROUTE

STORING LOCATION

Often visited locations can be stored in
the Address Book. The stored addresses
can be easily retrieved to set them as a
destination or waypoint.

Storing home or work location

A home or work location can be stored in
the system.

1.

Touch [Settings] on the Launch Bar.

2.

Touch [Navigation] and touch [Ad-
dress Book].

3.

Touch [Add Home Location] or [Add
Work Location].

4. Touch an appropriate method to set

the location. Refer to the search meth-
ods used for destination setting.

“Setting destination” (page 6-10)

When stored, the location is displayed
at the center of the map on the touch
screen display.

5. Edit the contents of the stored item as

necessary and touch [OK].

“Editing stored location”
(page 6-30)

INFO:

If you touch [Go Home (Save Location)] or
[Go to Work (Save Location)] on the
destination screen while the home or
work location is not stored yet, the system
will display a message asking if you wish
to store a home or work location. Touch
[Yes] to store the home or work location.

Storing location by searching

It is possible to store a location by
searching in various ways.

6. Navigation (if so equipped)

6-27

-------------------------------------------------------------------------------------------------------------------------------------------------------------

6. Navigation (if so equipped)

1.

Touch [Settings] on the Launch Bar.

2.

Touch [Navigation].

3.

Touch [Address Book].

4. Touch [Saved Locations].

5. Touch [Add New].

6. Touch an appropriate method to set a

location. Refer to the search methods
used for destination setting.

“Setting destination” (page 6-10)

7.

Touch [OK].

8. A message is displayed, and the ad-

dress of the location is stored in the
Address Book.

9. Adjust and edit the contents of the

stored item as necessary. Touch [OK]
to confirm.

“Editing stored location”
(page 6-30)

INFO:

.

When the location is stored in the
Saved Locations, [Address Book] can
be used to search for the location.

.

When 200 locations are already stored,
a new location cannot be stored until a
currently stored location is deleted.

Storing location by moving map

1.

Move to the preferred location on the
map and touch [

] on the touch

screen display.

2.

Touch [Save Location]. A message is
displayed.

3.

The icon representing the stored loca-
tion is displayed on the map. Push

<MAP>

to return to the current

location map screen.

STORING ROUTE

A maximum of 10 calculated routes can be
stored. Stored routes can be easily re-
trieved and set as the suggested route.

A route requires at least one waypoint in
order to be stored.

1.

Push

<MAP>

and then touch [Route]

on the Launch Bar.

2.

Touch [Save Route]. A confirmation
message is displayed. Select [Yes] to
store the current route.

INFO:

.

At least 1 waypoint must be set for the
route to be stored.

.

A stored route includes only locations
(destination and waypoints) and route
calculation conditions, not the route
itself.

.

The route is stored in the first available
position number in the stored routes
list.

.

When 10 routes are already stored in
the address book, a new route cannot
be stored until a route is deleted.

“Deleting stored item” (page 6-33)

STORING AVOID AREA

An Avoid Area can be stored. The Avoid
Area is an area that can be excluded from
a route, such as a road that is always
congested. Once Avoid Areas are stored,
the system avoids those areas when
calculating a route. Up to 10 Avoid Areas
can be stored.

1.

Touch [Settings] on the Launch Bar.

6-28

-------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

 

 

 

 

 

Content      ..     6      7      8      9     ..