Content .. 16 17 18 19 ..

Nissan Titan (2022 year). Manual in english - page 18

Front defroster button

Temperature control dial (driver’s side)/
AUTO button

Display screen

Temperature control dial (passenger’s
side)/DUAL button

Fresh air intake button

Air recirculation button

A/C (air conditioner) button

MODE (manual air flow control) button

Fan speed control buttons

10.

ON-OFF button

11.

Rear window and/or

outside

mirror defroster switch (if so equipped)

WARNING

•

The air conditioner cooling function
operates only when the engine is
running.

•

Do not leave children or adults who
would normally require the assis-
tance of others alone in your vehicle.
Pets should also not be left alone.
They could accidentally injure them-
selves or others through inadvertent
operation of the vehicle. Also, on hot,
sunny days, temperatures in a closed
vehicle could quickly become high
enough to cause severe or possibly
fatal injuries to people or animals.

•

Do not use the recirculation mode for
long periods as it may cause the inte-
rior air to become stale and the win-
dows to fog up.

NOTE:
• Odors from inside and outside the ve-

hicle can build up in the air conditioner
unit. Odor can enter the passenger
compartment through the vents.

• When parking, set the heater and air

conditioner controls to turn off air re-
circulation to allow fresh air into the
passenger compartment. This should
help reduce odors inside the vehicle.

LHA3575

HEATER AND AIR CONDITIONER
(automatic) (if so equipped)

Monitor, climate, audio, phone and voice recognition systems

4-37

AUTOMATIC OPERATION

Cooling or heating (auto)

This mode may be normally used all year
round as the system automatically works
to keep a constant temperature. Air flow
distribution and fan speed are also con-
trolled automatically.

1. Press the AUTO button on.

2. Turn the temperature dial to the left or

right to set the desired temperature.
Driver and passenger temperatures can
be set independently. Press the DUAL
button to activate dual climate control
functions. Turn the passenger's side
temperature control dial to the left or
right to set the desired passenger's
temperature.

• Adjust the temperature dial to about 75°F

(24°C) for normal operation.

• The temperature of the passenger com-

partment will be maintained automati-
cally. Air flow distribution, fan speed and
A/C on/off are also controlled automati-
cally. The A/C button indicator will remain
in the last user setting. Under this condi-
tion, the indicator light on the A/C button
indicator will not turn on if the user had
not selected the A/C button off. Turning
off the air conditioning via the A/C button
is not allowed in this mode. If the A/C
button indicator was on when entering
this mode, and the A/C button is selected
in this mode, the A/C button indicator will
turn off, but the A/C compressor will still
be automatically enabled. For additional
information, see “Air flow control” (P. 4-40).
To turn off the compressor, turn off auto
mode, then turn the A/C on then off until
the A/C button indicator is not lit.

• A visible mist may be seen coming from

the vents in hot, humid conditions as the
air is cooled rapidly. This does not indicate
a malfunction.

Heating

When you need to heat only, use this mode.

1. Press the AUTO button.

2. Turn the temperature control dial to the

left or the right to set the desired tem-
perature. Driver and passenger tem-
peratures can be set independently.
Press the DUAL button to activate dual
climate control functions. Turn the pas-
senger’s side temperature control dial
to the left or right to set the desired
passenger’s temperature.

• The temperature of the passenger com-

partment will be maintained automati-
cally. Air flow distribution and fan speed
are also controlled automatically.

• Do not set the temperature lower than

the outside air temperature. Otherwise,
the system may not work properly.

• Not recommended if windows fog up.

Dehumidified defrosting or
defogging

1. Press the

defroster control button

to turn the system on. The indicator light
in the button will illuminate.

2. The fan will automatically change to

blower speed 5. Blower speed can be
changed by pressing the

fan speed

control button. Increase the fan to 6 or 7
for

aggressive

defogging

performance.

4-38

Monitor, climate, audio, phone and voice recognition systems

3. Turn the temperature dial to the left or

right to set the desired temperature.

• To quickly remove ice from the outside of

the windows, press the

fan speed

control button to the maximum position.

• As soon as possible after the windshield

is clean, press the AUTO button to return
to the auto mode.

• When the

control is activated, the air

conditioner will automatically be turned
on at outside temperatures approxi-
mately at or below freezing. This dehu-
midifies the air which helps defog the
windshield. Under this condition, the indi-
cator light on the A/C button indicator will
not turn on if the user had selected A/C
off prior to entering this mode. Turning off
the air condition via the A/C button is not
allowed in this mode. If the A/C button
indicator was on when entering this
mode, and the A/C button is selected in
this mode, the A/C compressor will still be
automatically enabled. The air recircula-
tion mode automatically turns off, allow-
ing outside air to be drawn into the pas-
senger compartment to further improve
the defogging performance.

Remote Engine Start with
Intelligent Climate Control (if so
equipped)

Vehicles equipped with automatic climate
controls and Remote Engine Start function
may go into automatic heating or cooling
mode when Remote Engine Start is acti-
vated depending on outside and cabin
temperatures. During this period, the cli-
mate control display and buttons will be
inoperable until the ignition switch is
turned on. In Remote Engine Start defrost-
ing mode, the rear window defroster (if so
equipped), heated seats (if so equipped)
and heated steering wheel (if so equipped)
may be activated automatically.

Voice Recognition logic (if so
equipped)

When the climate control system is on, the
front and rear (if so equipped) fan speeds
may be automatically lowered so that
commands are more easily recognized.
Fan speed can be adjusted using the fan
speed

decrease and

increase

buttons, if desired.

MANUAL OPERATION

Fan speed control

Press the

fan speed control buttons

to manually control the fan speed.

Press the AUTO button to return to auto-
matic control of the fan speed.

When adjusting the manual fan from auto
mode, the outlet direction (floor, floor/
defrost, vent, bi-level) will still automatically
change. To fix the outlet to a manual mode,
select the desired air flow location using
the MODE button.

Temperature control dial

The temperature control dial allows you to
adjust the temperature of the outlet air. To
lower the temperature, turn the dial to the
left. To increase the temperature, turn the
dial to the right. Temperature can be ad-
justed on the driver’s and passenger’s side.

Air recirculation

Press the

air recirculation button to

recirculate interior air inside the vehicle
when:
• driving on a dusty road
• to prevent traffic fumes from entering

passenger compartment.

Monitor, climate, audio, phone and voice recognition systems

4-39

• for maximum cooling when using the air

conditioning system.

Press the AUTO button to return to auto-
matic mode.

The air recirculation button will not be acti-
vated when the air conditioner is in
mode.

When the outside temperature exceeds
approximately 70°F (21°C), the air condition-
ing system may default to air recirculation
mode automatically to reduce overall
power consumption. To exit air recircula-
tion mode, select the fresh air intake but-
ton to enter fresh air mode.

In Floor/Defrost mode, the recirculation
button can be selected to block outside
odors. However, for maximum defogging in
this mode, it is recommended to turn recir-
culation off when possible.

Fresh air intake

Press the

fresh air intake button to

draw outside air into the passenger
compartment.

Automatic intake air control

In the AUTO mode, the intake air will be
controlled automatically. When the outside
temperature exceeds approximately 70°F
(21°C), the air conditioning system may de-
fault to air recirculation mode automati-
cally to reduce overall power consumption.
To exit air recirculation mode, select the
fresh air intake button to enter fresh air
mode. The air recirculation indicator will
turn off, the fresh air indicator will turn on.

To manually control the intake air, press the

fresh air intake button. To return to the

automatic control mode if the

fresh

air indicator is illuminated, press and hold
the

fresh air intake button for about 2

seconds. The fresh air indicator and air re-
circulation indicator lights will flash twice,
and then the intake air will be controlled
automatically. To return to the automatic
control mode if the

air recirculation

icon is illuminated, press and hold the
air recirculation button for about 2 sec-
onds. The

air recirculation indicator

and

fresh air intake indicator lights will

flash twice and the intake air will be con-
trolled automatically. When OFF is selected,
the intake door is automatically forced to
recirculate. To get fresh air in OFF mode,
select the

fresh air intake button. The

MODE can be changed in OFF mode to
direct the flow of incoming air if intake is set
to

fresh.

A/C (air conditioner) button

Start the engine, turn the

fan speed

control buttons to the desired position and
press the

button to turn on the air

conditioner. To turn off the air conditioner,
press the

button again. In auto

mode, the air conditioner will be on even if
the

button indicator is off at tem-

peratures

approximately

above

freezing.

The air conditioner cooling function op-
erates only when the engine is running.

Air flow control

Press the MODE button to manually control
air flow and select the air outlet.

—

Air flows from center and side
vents.

—

Air flows from center and side
vents and foot outlets.

—

Air flows mainly from foot outlets.

—

Air flows from defroster and foot
outlets.

4-40

Monitor, climate, audio, phone and voice recognition systems

To turn system off

Press the ON-OFF button.

Rear window and/or outside
mirror defroster switch (if so
equipped)

For additional information, see “Rear win-
dow

and/or

outside

mirror

defroster

switch” (P. 2-44).

OPERATING TIPS

The sunload sensor (if so equipped)

, lo-

cated on the top center of the instrument
panel, helps the system maintain a con-
stant temperature. Do not put anything on
or around this sensor.

• When the climate system is in automatic

operation and the engine coolant tem-
perature and outside air temperature are
low, the air flow outlet may default to de-
froster mode for approximately 2 min-
utes 30 seconds. This is not a malfunc-
tion.

After

the

engine

coolant

temperature warms up, the air flow outlet
will return to foot mode and operation will
continue normally.

• When the outside and interior cabin tem-

peratures are moderate to high, the in-
take setting may default to turn off air
recirculation to allow fresh air into the
passenger compartment. You may no-
tice air flow from the foot mode, bi-level
mode, or side demist vent outlets for a
maximum of 15 seconds. This may occur
when previous climate setting was sys-
tem off. This is not a malfunction. After
the initial warm air is expelled, the intake
will return to automatic control, air flow
outlet will return to previous settings, and
operation will continue normally. To exit,
press any climate control button.

• Keep the windows closed while the air

conditioner is in operation.

• If you feel that the air flow mode you have

selected and the outlets the air is coming
out do not match, select the

mode.

LHA4126

Monitor, climate, audio, phone and voice recognition systems

4-41

• When you change the air flow mode, you

may feel air flow from the foot outlets for
just a moment. This is not a malfunction.

• When the ignition is placed in the ON po-

sition, in some fogging or high cabin
temp conditions, air may flow automati-
cally to the foot outlets for 3 to 7 seconds
to purge the hot air in the system.

The air conditioner system in your NISSAN
vehicle is charged with a refrigerant de-
signed with the environment in mind.

This refrigerant does not harm the
earth's ozone layer.

Special charging equipment and lubricant
is required when servicing your NISSAN air
conditioner. Using improper refrigerants or
lubricants will cause severe damage to
your air conditioner system. For additional
information, see “Air conditioner system re-
frigerant

and

oil

recommendations”

(P. 10-8).

It is recommended that you visit a NISSAN
dealer to service your “environmentally
friendly” air conditioner system.

WARNING

The air conditioner system contains re-
frigerant under high pressure. To avoid
personal injury, any air conditioner ser-
vice should be done only by an experi-
enced

technician

with

proper

equipment.

The vehicle is equipped with a shark fin
antenna.

SERVICING AIR CONDITIONER

ANTENNA

4-42

Monitor, climate, audio, phone and voice recognition systems

WARNING

•

It is unlawful in most jurisdictions for
a person to drive a motor vehicle
which is equipped with a television
monitor or screen that is visible, di-
rectly or indirectly, to the driver while
operating the vehicle. In the interest
of safety, the unit should never be
installed where it will be directly or
indirectly visible, by the operator of
the motor vehicle.

•

For safety reasons when changing
discs, it is recommended that the ve-
hicle is not in motion, and that you do
not allow children to unfasten safety
belts to change discs or make any
adjustments to the system. System
adjustments can be accomplished
using

the

remote

control,

while

safety belts remain fastened.

•

Enjoy your RSI system but remember
that safety of all passengers remains
the number one priority. Devices in-
stalled in the USB, HDMI, or head-
phone jack may protrude and create
a potential eye impact hazard for un-
belted passengers during a vehicle
accident. To reduce the risk of injury,
use only SD cards (hidden on left side
of driver side monitor) or low-profile
USB storage devices.

CAUTION

•

If your vehicle is equipped with a
wireless rear seat audio system or
any other wireless infrared device,
make sure it is powered off when op-
erating the RSI system. If both sys-
tems are powered on at the same
time, the two systems may obstruct
each other, possibly creating unde-
sirable audio interference through
the wireless headphones.

•

Do not touch the inner pins of the
jacks on the front panel. Electrostatic
discharge may cause permanent
damage to the device.

•

The LCD display screen is not touch-
screen. Do not put pressure or add
suction cups on the screen.

•

Caution children to avoid touching or
scratching the screen, as it may be-
come dirty or damaged.

•

Be sure to run the vehicle engine
while using the system. Using this
system without running the engine
can result in battery drain. To avoid
the risk of battery drain, please re-
member to turn off the system when
the vehicle is not in use.

WELCOME

The Rear Seat Infotainment (RSI) system,
with built-in Wi-Fi, has some advanced fea-
tures. Before operating this system, read
this section thoroughly and retain it for fu-
ture reference.

System features

• Twin 8-inch Color TFT-LCD Panels with

1024x600 Resolution

• Internal Wi-Fi Network
• Bluetooth® 4.1 Audio Streaming
• Miracast®/Smart View Capability
• SmartStream Content Sharing
• USB 2.0 Port, SDXC Card Input

REAR SEAT INFOTAINMENT (RSI) (if
so equipped)

Monitor, climate, audio, phone and voice recognition systems

4-43

• HDMI 1.4 Input with MHL 2.0 Support
• Exclusive Slingplayer® Application
• 3.5mm Stereo Headphone Output
• Front Panel Capacitive Touch Controls
• Infrared Wireless Headphones
• Full-Function Slimline Remote Control
• Monitor Screen Sharing

GETTING STARTED

Turning the monitor on or off

1. Press the

button

on the top of

the monitor or the remote control to
turn the monitor on or off. When in use,
the front panel controls will illuminate.

2. After the monitor has been turned on

and is displaying a picture, the up/down
viewing angle can be adjusted to opti-
mize the picture quality. Press the push-
button latch

located on the top of the

monitor to pivot the screen.

Power up tips

1. After the ignition is placed in the ON po-

sition, there is a 12 second delay before
the monitor

(power) button is

operable.

2. On some vehicles after the ignition is

turned off, the system will continue to
work for 10 minutes, or until the driver's
door is opened.

3. Remember to turn the monitor off and

pivot the screen to the locked (latched)
position when not in use.

Audio options

Wireless headphones

Each monitor includes a built-in dual chan-
nel infrared transmitter for use with wire-
less

headphones. The

wireless

head-

phones must be used within a line of sight
from the transmitter as infrared signals, like
visible light, travel only in a straight line.

How to use the wireless headphones

When placing the headphones on your
head, make sure to observe the left and
right orientation. The headphones must be
oriented correctly (facing forward) to re-
ceive

the

audio

signal.

Press

the

(power) button on the headphones,

LHA5588

4-44

Monitor, climate, audio, phone and voice recognition systems

then select channel “A” to listen to monitor
A, or channel “B” to listen to monitor B. Ad-
just the audio level using the volume con-
trol on each headphone.

Wired headphones

There is a 3.5mm stereo headphone out-
put on each monitor which can be used
with most standard stereo headphones
(wired headphones sold separately).

Bluetooth® streaming audio

To listen to audio throughout the entire ve-
hicle, the system includes the ability to
stream audio over a Bluetooth® connec-
tion to the vehicle’s stereo system.

When monitor A is selected as the source
to stream from, the audio output to the
wireless and wired headphones will be dis-
abled (only on monitor A). To use the wire-
less or wired headphones with monitor A,
you must turn off the Bluetooth® stream-
ing feature. To enable/disable Bluetooth®
streaming, navigate to the “SETTINGS”
menu, or press

on the remote control

during content playback. For additional in-
formation, see “Settings” (P. 4-68).

Media compatibility

For a list of compatible media formats for
this system, see “Storage device format-
ting” (P. 4-45).
• The metadata or file information of some

audio and video files may not be correctly
displayed.

• It is not possible to play content that is

protected

DRM

(Digital

Rights

Management).

• There may be a delay before playback

begins when using USB flash drives or SD
cards with complex folder hierarchies or
many files.

• Some audio, video, and image files may

be incompatible with this system due to
file characteristics, file format, recording
software

used,

directory

structure,

and/or the type of audio/video encoding
used.

Storage device formatting

This system is compatible with several
types of formatting for USB flash drives and
SD cards. Refer to the documentation that
comes with your storage device for more
details on how to format.

FAT32 - USB and SDHC

Good for smaller capacity storage devices,
but individual files on the drive must be less
than 4GB. This format is good for music
and images.

EX-FAT - USB and SDXC

Better choice for larger capacity storage
devices with files that are more than 4GB.
This format is better for larger files such as
full-length movies.

NTFS - USB and SDXC

Best choice for very large capacity storage
devices - with no limitations on file size. This
format can be used for all file sizes.

Monitor, climate, audio, phone and voice recognition systems

4-45

Supported Formats

Format

Extension

Supported Variations/Codecs

VIDEO

ASF

.wmv

H.263, H.264, MPEG-2 Part 2, WMV

AVI

.avi

H.263, H.264, MPEG-2 Part 2, Xvid, WMV

MP4

.mp4, .m4v

H.263, H.264, MPEG-2 Part 2, MPEG-4 Part 2

Matroska

.mkv

H.263, H.264, MPEG-2 Part 2, MPEG-4 Part 2, WMV

MPEG

.mpg, .mpeg, .vob

H.264, MPEG-2 Part 2, MPEG-4 Part 2

AUDIO

AAC

.m4a, .aac

ASF

.wma

WMA, WMA Lossless, WMA Voice, WMA Pro

FLAC

.flac

FLAC 1.2.1

Matroska

.mka

MPEG

.mp1, .mp2, .mp3

MPEG-1 Audio Layer 1, 2, 3, MPEG-2/2.5 Audio Layer 1, 2, 3

OGG

.ogg

WAV

.wav

PHOTO

BMP

.bmp

GIF

.gif

JPEG

.jpg, .jpeg

PNG

.png

TIFF

.tiff, .tif

WebP

.webp

Video Profiles Supported:
ASF:

WMV7, WMV8, WMV9;

H.264:

Baseline, Main, Extended, High

MPEG-2 Part 2:

Simple, Main, High;

MPEG-4 Part 2:

Simple, Advanced Simple Profile, Xvid

4-46

Monitor, climate, audio, phone and voice recognition systems

CONTROL DESCRIPTION

SD Card Slot

Play videos, music, and images stored on
most SD cards.

The full-size SD card slot is accessible on
the left side of the monitor when the
screen is in the open position.

Screen latch

Press the push-button latch located on
the top of the monitor to pivot the
screen. Remember to turn the monitor
off and pivot the screen to the locked
(latched) position when not in use.

Power (Monitor A)

Press this button to turn the monitor on.
Press again to turn the monitor off. Press
and hold for 6 seconds to reset the sys-
tem (Monitor A only)

Power (Monitor B)

Press this button to turn the monitor on.
Press again to turn the monitor off.

Front panel controls

Capacitive-touch buttons provide user
interface navigation, Select, Back, and
Home functions.

Monitor screen display

Includes an 8-inch TFT Liquid Crystal
Display with 1024 x 600 resolution.

HDMI port

Connect an external audio/video source
using a full-size HDMI connector. Sup-
ports MHL 2.0 playback and charging.

LHA5995

Monitor A (Driver’s Side)

Monitor, climate, audio, phone and voice recognition systems

4-47

USB 2.0 port

Play videos, music, and images stored on
most USB devices. Provides up to 2 amps
of

output

charge

most

mobile

devices.

Headphone output jack

Connect wired headphones using a 1/8
in (3.5 mm) stereo connector.

CAUTION

•

Do not use any harsh solvents or
chemicals

when

cleaning

the

monitor.

•

Do not use any abrasive cleaners that
may scratch the screen. Use only a
lightly dampened lint free cloth to
wipe the screen if it is dirty.

•

The LCD display screen is not touch-
screen. Do not put pressure or add
suction cups on the screen.

•

Caution children to avoid touching or
scratching the screen, as it may be-
come dirty or damaged.

•

Place the monitor in the fully closed
position when not in use.

LHA5996

Monitor B (Passenger’s Side)

4-48

Monitor, climate, audio, phone and voice recognition systems

REMOTE CONTROL OPERATION

Before use

Before attempting to operate your remote
control, turn the remote control face down
and remove the battery insulator by pulling
the clear plastic tab away from the remote
control.

Replacing the battery

1. Turn the remote control face down. Use

a coin to turn the battery cover counter-
clockwise and remove it.

2. Replace the battery with a CR2032 or

equivalent. Make sure that proper polar-
ity is observed. The positive (+) side of the
battery should face upwards.

3. Place the cover back into position and

turn it clockwise until it locks into place.

The remote control will only operate this
device. It is not a universal remote control
and will not control other equipment.

WARNING

•

Keep the battery out of the reach of
children. In case the battery is acci-
dentally

swallowed,

immediately

consult a doctor. Also, when dispos-
ing of used batteries, please comply
with governmental regulations or
environmental

public

institution

rules that apply in your country/area.

CAUTION

•

Always ensure that the battery is in-
serted in the correct direction as
shown in the battery compartment.

•

When the battery fails to function, re-
place it immediately.

•

Remove the battery if the remote
control is not used for a month or
longer.

•

Storage in extreme cold can weaken
the battery. Keep the remote control
stored in a cool, dry place.

LHA5589

Battery door in locked position

LHA5590

Battery door in unlocked position

Monitor, climate, audio, phone and voice recognition systems

4-49

REMOTE CONTROL BUTTONS

Power

Press this button to turn the monitor on.
Press again to turn the monitor off.

Monitor A

Press this button to transmit the remote
control codes and functions to operate
monitor A (Driver side).

Directional pad

Press

these

buttons

increase/

decrease the volume or navigate up/
down when displaying a menu or file list.

Home

Press this button to return to the home
screen.

Back

Press this button to go back to the pre-
vious screen.

Monitor B

Press this button to transmit the remote
control codes and functions to operate
monitor B (Passenger side).

Select

Press this button to make a selection
when displaying a menu or file list.

Menu

Press this button to open the context
menu (when available).

NOTE:
You must first select the desired moni-
tor (press A or B) to control it. Example
- Press A, then press Power to turn
monitor A on/off.

LHA4879

4-50

Monitor, climate, audio, phone and voice recognition systems

WIRELESS HEADPHONE
OPERATION

Installing the batteries

Before attempting to operate the head-
phones, install the batteries as described
below:

1. Remove the headphone battery cover

by using a screwdriver.

2. Install two “AAA” batteries into the head-

phones. Make sure that proper polarity
(+ or -) is observed.

3. Reinstall headphone battery cover.

Headphone operation

Press the power button

on the head-

phones to turn on and off the headphones.
The red LED will illuminate when the head-
phone is turned on. Set the select switch to
“A” or “B” for use with the “A” monitor or “B”
monitor respectively. Use the volume
thumb wheel

to adjust the volume level

for the headphone audio.

NOTE:
If the headphones are accidentally left
on and system is powered off, a bat-
tery saver feature will automatically
turn off the headphones after ap-
proximately 3 minutes.

LHA5591

Monitor, climate, audio, phone and voice recognition systems

4-51

WARNING

•

Keep the batteries out of the reach of
children. In case the batteries are ac-
cidentally swallowed, immediately
consult a doctor. Also, when dispos-
ing of used batteries, please comply
with governmental regulations or
environmental

public

institution

rules that apply in your country/area.

CAUTION

•

Always ensure that the batteries are
inserted with the positive and nega-
tive terminals in the correct direction
as shown in the battery compart-
ment

•

Different types of batteries have dif-
ferent characteristics. Do not mix dif-
ferent types.

•

Do not mix old and new batteries.
Mixing old and new batteries will
shorten battery life and/or cause
chemical

leaks

from

the

old

batteries.

•

When batteries fail to function, re-
place them immediately.

•

Remove the batteries if the head-
phones are not used for a month or
longer.

GENERAL OPERATION

Navigating menus

When fully powered on, the Home screen
can be accessed at any time by pressing
the

button on the remote control, or

the

button on the monitor.

The main menu

is located on the far-left

side of the screen and allows users to se-
lect a source, change settings, USB fast-
charge certain devices, and mirror content
playing from the opposite monitor.

LHA5592

4-52

Monitor, climate, audio, phone and voice recognition systems

Content .. 16 17 18 19 ..