Nissan Titan (2022 year). Manual in english - page 17

•

Do not strike the cameras. They are
precision

instruments.

Doing

could cause a malfunction or cause
damage resulting in a fire or an elec-
tric shock.

There are some areas where the system
will not show objects and the system does
not warn of moving objects. When in the
front or rear view display, an object below
the bumper or on the ground may not be
viewed

. When in the bird’s-eye view, a tall

object near the seam

of the camera

viewing areas will not appear in the
monitor.

The following are operating limitations and
do not represent a system malfunction:
• There may be a delay when switching

between views.

• When the temperature is extremely high

or low, the screen may not display objects
clearly.

• When strong light directly shines on the

camera, objects may not be displayed
clearly.

• The screen may flicker under fluorescent

light.

• The colors of objects on the Intelligent

Around View® Monitor may differ some-
what from the actual color of objects.

• Objects on the Intelligent Around View®

Monitor may not be clear and the color of
the

object

may

differ

dark

environment.

• There may be differences in sharpness

between each camera view of the bird's-
eye view.

• Do not use wax on the camera lens. Wipe

off any wax with a clean cloth that has
been dampened with a diluted mild
cleaning agent, then wipe with a dry
cloth.

• Due to a sudden change in humidity, con-

densation may form on the camera lens
causing the image to be unclear.

• Under fluorescent lights, the screen may

flicker.

• The vertical lines may appear on the sub-

ject on the screen. This is caused by the
strong reflected light from the bumper.

System temporarily unavailable

When the “!” icon is displayed on the screen,
there are abnormal conditions in the Intel-
ligent Around View® Monitor. This will not
hinder normal driving operation but it is
recommended that the system be in-
spected. It is recommended that you visit a
NISSAN dealer for this service.

LHA3591

Monitor, climate, audio, phone and voice recognition systems

4-21

When the “[X]” icon is displayed on the
screen, the camera image may be receiv-
ing temporary electronic disturbances
from surrounding devices. This will not hin-
der normal driving operation but it is rec-
ommended that the system be inspected
if it occurs frequently. It is recommended
that you visit a NISSAN dealer for this
service.

SYSTEM MAINTENANCE

CAUTION

•

Do not use alcohol, benzine or thin-
ner to clean the camera. This will
cause discoloration.

•

Do not damage the cameras as the
monitor screen may be adversely
affected.

If dirt, rain or snow accumulates on any of
the cameras

, the Intelligent Around

View® Monitor may not display objects
clearly. Clean the camera by wiping with a
cloth dampened with a diluted mild clean-
ing agent and then wiping with a dry cloth.

LHA3592

LHA3909

4-22

Monitor, climate, audio, phone and voice recognition systems

1. CAMERA button

LHA5568

MOVING OBJECT DETECTION (MOD)
(if so equipped)

Monitor, climate, audio, phone and voice recognition systems

4-23

WARNING

•

Failure to follow the warnings and in-
structions for proper use of the Mov-
ing Object Detection system could
result in serious injury or death.

•

The MOD system is not a substitute
for proper vehicle operation and is
not designed to prevent contact with
objects

surrounding

the

vehicle.

When maneuvering, always use the
outside mirrors and rearview mirror
and turn and check the surroundings
to ensure it is safe to maneuver.

•

The system is deactivated at speeds
above 6 mph (10 km/h). It is reacti-
vated at lower speeds.

•

The MOD system is not designed to
detect

surrounding

stationary

objects.

The MOD system can inform the driver of
moving objects near the vehicle when
backing out of garages, maneuvering in
parking lots and in other such instances.

The MOD system detects moving objects
by using image processing technology on
the image shown in the display.

MOD SYSTEM OPERATION

The MOD system will turn on automatically
under the following conditions:
• When the shift lever is in the R (Reverse)

position.

• When vehicle speed decreases below ap-

proximately 6 mph (10 km/h) and the
camera screen is displayed.

The MOD system operates in the following
conditions when the camera view is
displayed:
• When the shift lever is in the P (Park) or N

(Neutral) position and the vehicle is
stopped, the MOD system detects mov-
ing objects in the bird’s-eye view. The
MOD system will not operate if the out-
side mirrors are moving in or out, in the
stowed position, or if either front door is
opened.

LHA4190

Front and bird’s-eye views

4-24

Monitor, climate, audio, phone and voice recognition systems

• When the shift lever is in the D (Drive)

position and the vehicle speed is below
approximately 6 mph (10 km/h), the MOD
system detects moving objects in the
front view.

• When the shift lever is in the R (Reverse)

position and the vehicle speed is below
approximately 6 mph (10 km/h), the MOD
system detects moving objects in the
rear view. The MOD system will not oper-
ate if the tailgate is open.

The MOD system does not detect moving
objects in the front-side view. The MOD
icon is not displayed on the screen when in
this view.

When the MOD system detects moving ob-
jects near the vehicle, a chime will be heard
and a yellow frame will be displayed on the
view where the objects are detected. While
the MOD system continues to detect mov-
ing objects, the yellow frame continues to
be displayed.

NOTE:

While the RCTA chime is beeping, the
MOD system will not chime.

In the bird’s-eye view, the yellow frame

displayed on each camera image (front,
rear, right, left) depending on where mov-
ing objects are detected.

The yellow frame

is displayed on each

view in the front view and rear view modes.

A blue MOD icon

is displayed in the view

where the MOD system is operative. A gray
MOD icon is displayed in the view where the
MOD system is not operative.

If the MOD system is turned off, the MOD
icon

is not displayed.

TURNING MOD ON AND OFF (if so
equipped)

Some vehicles include the option to allow
the MOD system to be turned on or off.

To turn the MOD system on or off:

1. Press the

button on the

steering wheel and select “Settings” in
the vehicle information display.

2. Using the

buttons, select “Driver

Assistance” and press the ENTER button.

3. Select “Parking Aids”.

LHA5345

Rear and bird’s-eye views

LHA5346

Rear and front-side views

Monitor, climate, audio, phone and voice recognition systems

4-25

4. Toggle ON or OFF “Moving Object” using

the ENTER button.

You can also turn the MOD on or off by
pressing the Parking Aids system switch (if
so equipped).

MOD SYSTEM LIMITATIONS

WARNING

Listed below are the system limitations
for MOD. Failure to operate the vehicle
in accordance with these system limi-
tations could result in serious injury or
death.

•

Do not use the MOD system when
towing a trailer. The system may not
function properly.

•

Excessive noise (for example, audio
system volume or open vehicle win-
dow) will interfere with the chime
sound, and it may not be heard.

•

The MOD system performance will be
limited according to environmental
conditions and surrounding objects
such as:

–

When there is low contrast be-

tween background and the mov-
ing objects.

–

When there is a blinking source of

light.

–

When strong light such as another

vehicle’s headlight or sunlight is
present.

–

When camera orientation is not in

its usual position, such as when a
mirror is folded.

–

When there is dirt, water drops or

snow on the camera lens.

–

When the position of the moving

objects in the display is not
changed.

•

The MOD system might detect flow-
ing water droplets on the camera
lens, white smoke from the muffler,
moving shadows, etc.

•

The MOD system may not function
properly depending on the speed, di-
rection, distance or shape of the
moving objects.

•

If your vehicle sustains damage to
the parts where the camera is in-
stalled, leaving it misaligned or bent,
the sensing zone may be altered and
the MOD system may not detect ob-
jects properly.

•

When the temperature is extremely
high or low, the screen may not dis-
play objects clearly. This is not a
malfunction.

NOTE:
The blue MOD icon will change to or-
ange if one of the following has oc-
curred:
• When the system is malfunctioning.
• When the component temperature

reaches a high level (icon will blink).

• When the RearView camera has de-

tected a blockage (icon will blink).

If the icon light continues to illuminate
orange, have the MOD system checked. It
is recommended that you visit a NISSAN
dealer for this service.

4-26

Monitor, climate, audio, phone and voice recognition systems

SYSTEM MAINTENANCE

CAUTION

•

Do not use alcohol, benzine or thin-
ner to clean the camera. This will
cause discoloration.

•

Do not damage the camera as the
monitor screen may be adversely
affected.

If dirt, rain or snow accumulates on any of
the cameras

, the MOD system may not

operate properly. Clean the camera by wip-
ing with a cloth dampened with a diluted
mild cleaning agent and then wiping with a
dry cloth.

LHA3909

Monitor, climate, audio, phone and voice recognition systems

4-27

Adjust air flow direction for the driver's and
passenger's side vents

, center vents

and rear passengers' vents (if so equipped)

by moving the vent slide and/or vent

assemblies.

WARNING

•

The air conditioner cooling function
operates only when the engine is
running.

•

Do not leave children or adults who
would normally require the assis-
tance of others alone in your vehicle.
Pets should also not be left alone.
They could accidentally injure them-
selves or others through inadvertent
operation of the vehicle. Also, on hot,
sunny days, temperatures in a closed
vehicle could quickly become high
enough to cause severe or possibly
fatal injuries to people or animals.

•

Do not use the recirculation mode for
long periods as it may cause the inte-
rior air to become stale and the win-
dows to fog up.

NOTE:
• Odors from inside and outside the ve-

hicle can build up in the air conditioner
unit. Odor can enter the passenger
compartment through the vents.

• When parking, set the heater and air

conditioner controls to turn off air re-
circulation to allow fresh air into the
passenger compartment. This should
help reduce odors inside the vehicle.

LHA3772

VENTS

HEATER AND AIR CONDITIONER
(manual) (if so equipped)

4-28

Monitor, climate, audio, phone and voice recognition systems

CONTROLS

Fan speed control dial / system

OFF dial / A/C (air conditioning) button

2. Air flow control buttons

3. Temperature control dial / MAX A/C

button

Air recirculation button

Outside mirror defroster switch (if

so equipped)

Front windshield defrost button

Fan speed control dial

The

fan speed control dial turns the

fan on and off and controls fan speed.

Fan speed control dial — OFF mode

Setting the

fan speed control dial to the

off position will turn off the fan and the air
recirculation indicator light will turn on. To
get fresh air in fan off mode, press the
air recirculation button to turn off the indica-
tor. In fan off mode, the mode buttons can be
selected to change the air vent distribution
(if the air recirculation mode is off).

Air flow control buttons

The air flow control buttons allow you to
select the air flow outlets.

MAX
A/C

—

Air flows from center and side
vents with maximum cooling.

—

Air flows from center and side
vents.

—

Air flows from center and side
vents and foot outlets.

—

Air flows mainly from foot outlets
and side vents.

—

Air flows from defroster outlets
and foot outlets.

—

Air flows mainly from defroster
outlets.

LHA4127

Monitor, climate, audio, phone and voice recognition systems

4-29

Temperature control dial

The temperature control dial allows you to
adjust the temperature of the outlet air. To
lower the temperature, turn the dial to the
left. To increase the temperature, turn the
dial to the right.

Air recirculation button

ON position (Indicator light on)

Interior air is recirculated inside the vehicle.

Press the

button to the ON position

when:
• driving on a dusty road.
• to prevent traffic fumes from entering

passenger compartment.

• for maximum cooling when using the air

conditioner.

OFF position (Indicator light off)

If outside air is desired in off mode, press
the recirculation button until the indicator
turns off.

If fogging occurs, press the

front

windshield defrost button.

A/C (air conditioner) button

Start the engine, turn the

fan speed

control dial to the desired position and
press the

button to turn on the air

conditioner. To turn off the air conditioner,
press the

button again.

The air conditioner cooling function op-
erates only when the engine is running.

Outside mirror defroster switch (if
so equipped)

For additional information, see “Rear win-
dow

and/or

outside

mirror

defroster

switch” (P. 2-44).

HEATER OPERATION

Heating

This mode is used to direct heated air to
the foot outlets. Some air also flows from
the defrost outlets.

1. Press the

button to the OFF posi-

tion for normal heating. The indicator
light on the

button will go off.

2. Press the

air flow control button.

3. Turn the

fan speed control dial to

the desired position.

4. Turn the temperature control dial to the

desired position between the middle
and the hot position.

Ventilation

This mode directs outside air to the side
and center vents.

1. Press the

button to the off position.

The indicator light on the

button

will go off.

2. Press the

air flow control button.

3. Turn the

fan speed control dial to

the desired position.

4. Turn the temperature control dial to the

desired position.

Defrosting or defogging

This mode directs the air to the defrost
outlets to defrost/defog the windows.

1. Press the

defrost/defog button.

2. Turn the

fan speed control dial to

the desired position.

3. Turn the temperature control dial to the

desired position between the middle
and the hot position.

4-30

Monitor, climate, audio, phone and voice recognition systems

• To quickly remove ice or fog from the win-

dows, turn the

fan speed control dial

to the highest setting and the tempera-
ture control to the full HOT position.

• When the

position is selected, the air

conditioner automatically turns on if the
outside temperature is approximately at
or below freezing. This dehumidifies the
air which helps defog the windshield. The

mode automatically turns off, allow-

ing outside air to be drawn into the pas-
senger compartment to further improve
the defogging performance. Under this
condition, the indicator light on the A/C
button indicator will not turn on if the user
had selected the A/C off. Turning off the
air conditioning via the A/C button is not
allowed In this mode. If the A/C button
indicator was on when entering this
mode, and the A/C button is selected in
this mode, the A/C button indicator will
turn off, but the A/C compressor will still
be automatically enabled. The recircula-
tion button indicator will not illuminate if
the button is pressed in this mode.

Bi-level heating

The bi-level mode directs warmed air to
the side and center vents and to the front
and rear floor outlets.

1. Press the

button to the off position.

The indicator light on the

button

will go off.

2. Press the

air flow control button.

3. Turn the

fan speed control dial to

the desired position.

4. Turn the temperature control dial to the

desired position.

Heating and defogging

This mode heats the interior and defogs
the windshield.

1. Press the

air flow control button.

2. Turn the

fan speed control dial to

the desired position.

3. Turn the temperature control dial to the

desired position between the middle
and the hot position.

• When the

position is selected, the

air conditioner automatically turns on if
the outside temperature is approxi-
mately at or below freezing. Under this
condition, the indicator light on the A/C
button indicator will not turn on if the user
had selected A/C off. Turning off the air
conditioning via the A/C button is not al-
lowed in this mode. If the A/C button indi-
cator was on when entering this mode,
and the A/C button is selected in this
mode, the A/C compressor will still be
automatically

enabled.

recom-

mended that

mode be turned off for

maximum defogging. The recirculation
button can be selected in this mode to
block outside odors. However, for maxi-
mum defogging in this mode, it is recom-
mended to turn recirculation off when
possible.

Operating tips

Clear snow and ice from the wiper blades
and air inlet in front of the windshield.
This improves heater operation.

Monitor, climate, audio, phone and voice recognition systems

4-31

AIR CONDITIONER OPERATION

Start the engine, turn the

fan speed

control dial to the desired position, and
press the

button to activate the air

conditioner. When the air conditioner is on,
cooling and dehumidifying functions are
added to the heater operation.

The air conditioner cooling function op-
erates only when the engine is running.

Cooling

This mode is used to cool and dehumidify
the air.

1. Press the

button to the off position.

2. Press the

air flow control button.

3. Turn the

fan speed control dial to

the desired position.

4. Press the

button.

5. Turn the temperature control dial to the

desired position between the middle
and the cold position.

• For quick cooling when the outside tem-

perature is high, press the

button to

the on position. Be sure to return the
to the off position for normal cooling. The
indicator light on the

button will go

off. You may also select MAX A/C for quick
cooling.

Dehumidified heating

This mode is used to heat and dehumidify
the air.

1. Press the

button to the off position.

The indicator light on the

button

will go off.

2. Press the

air flow control button.

3. Turn the

fan speed control dial to

the desired position.

4. Press the

button on.

5. Turn the temperature control dial to the

desired position.

Dehumidified defogging

This mode is used to defog the windows
and dehumidify the air.

1. Press the

front defroster button.

2. Turn the

fan speed control dial to

the desired position.

When the

positions are se-

lected, the air conditioner automatically
turns on if the outside temperature is ap-
proximately at or below freezing. The air
conditioning system will continue to oper-
ate until the

fan speed control dial is

turned to OFF, the air conditioner is turned
OFF, or the vehicle is shut off. If a position
other than the

front defrost air flow

button is selected, the A/C compressor will
not turn off even if the user had selected
A/C off prior to entering defrost. In
front defrost or

foot defrost the indi-

cator light on the A/C button will not turn
on if the user had selected A/C off. Turning
off the air conditioning via the A/C button is
not allowed in this mode. If the A/C button
indicator was on when entering this mode,
and the A/C button is selected in this
mode, the A/C button indicator will turn off,
but the A/C compressor will still be auto-
matically enabled. This dehumidifies the air
which helps defog the windshield. The
mode automatically turns off, allowing out-
side air to be drawn into the passenger
compartment to further improve the de-
fogging performance.

3. Turn the temperature control dial to the

desired position.

4-32

Monitor, climate, audio, phone and voice recognition systems

Operating tips

• Keep the windows closed while the air

conditioner is in operation.

• After parking in the sun, drive for 2 or 3

minutes with the windows open to vent
hot air from the passenger compart-
ment. Then, close the windows. This al-
lows the air conditioner to cool the inte-
rior more quickly.

•

The air conditioning system should be
operated for approximately 10 minutes
at least once a month. This helps pre-
vent damage to the system due to lack
of lubrication.

• A visible mist may be seen coming from

the ventilators in hot, humid conditions
as the air is cooled rapidly. This does not
indicate a malfunction.

•

If the engine coolant temperature
gauge indicates engine coolant tem-
perature over the normal range, turn
the air conditioner off. For additional
information, see “If your vehicle over-
heats” (P. 6-12).

AIR FLOW CHARTS

The following charts show the button and
dial positions for

MAXIMUM AND QUICK

heating, cooling or defrosting. For addi-
tional information on heating and cooling,
see “Heater and air conditioner (manual)”
(P. 4-28).

The air recirculation (

) but-

ton should always be in the OFF position
for heating and defrosting.

Monitor, climate, audio, phone and voice recognition systems

4-33