|
|
BR-22 < REMOVAL AND INSTALLATION > BRAKE PIPING FRONT : Hydraulic Piping INFOID:0000000006263322 FRONT : Removal and Installation INFOID:0000000006263323 REMOVAL CAUTION: Never spill or splash brake fluid on painted surfaces. Brake fluid may seriously damage paint. Wipe it 1. Remove tires with power tool. 2. Drain brake fluid. Refer to 3. Loosen the flare nut with a flare nut wrench and separate the brake tube from the hose. CAUTION: • Never scratch the flare nut and the brake tube. 4. Remove the union bolt and copper washers, and remove the brake hose from the brake caliper assembly. 5. Remove the lock plate and remove the brake hose. INSTALLATION CAUTION: Never spill or splash brake fluid on painted surfaces. Brake fluid may seriously damage paint. Wipe it 1. Assemble the union bolt and the copper washers to the brake hose. CAUTION: Never reuse the copper washer. 1. ABS actuator and electric unit (con- 2. Front disc brake 3. Master cylinder assembly 4. Brake booster 5. Connector 6. Rear disc brake A. Brake tube B. Brake hose : Flare nut : Union bolt JPFIA0456ZZ Revision: 2011 November 2011 MURANO |