|
|
DTC P0643 SENSOR POWER SUPPLY EC-485 C D E F G H I J K L M A EC Revision: 2006 July 2007 Murano DTC P0643 SENSOR POWER SUPPLY PFP:18919 On Board Diagnosis Logic NBS00398 This self-diagnosis has the one trip detection logic. FAIL-SAFE MODE When the malfunction is detected, ECM enters fail-safe mode and the MIL lights up. DTC Confirmation Procedure NBS00399 NOTE: WITH CONSULT-II 1. Turn ignition switch ON. 2. Select “DATA MONITOR” mode with CONSULT-II. 3. Start engine and let it idle for 1 second. 4. EC-488, "Diagnostic Procedure" . WITH GST Follow the procedure “WITH CONSULT-II” above. DTC No. Trouble diagnosis name DTC detecting condition Possible cause P0643 Sensor power supply ECM detects a voltage of power source for ● Harness or connectors ● Accelerator pedal position sensor ● Power steering pressure sensor ● EVAP control system pressure sensor ● Refrigerant pressure sensor Engine operation condition in fail-safe mode ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return SEF058Y |