|
|
SERVICE DATA AND SPECIFICATIONS (SDS) SC-29 C D E F G H I J L M A B SC Revision: 2006 August 2006 Murano SERVICE DATA AND SPECIFICATIONS (SDS) PFP:00030 Battery NKS001MP Starter NKS001MQ Alternator NKS001MR Standard Option (With Intelligent Key) Type 80D23L 110D26L 20 hour rate capacity 12 V - 62 Ah 12 V - 75 Ah Cold cranking current (For reference value) 582 A 720 A Type M1T68681 MITSUBISHI make Reduction gear type System voltage 12 V No-load Terminal voltage 11 V Current Less than 90 A Revolution More than 2,750 rpm Minimum diameter of commutator 28.8 mm (1.134 in) Minimum length of brush 5.5 mm (0.217 in) Brush spring tension 15.0 - 20.4 N (1.53 - 20.8 kg, 3.3 - 4.5 lb) Clearance between bearing metal and armature shaft Less than 0.2 mm (0.008 in) Movement in height of pinion assembly 0.5 - 2.0 mm (0.020 - 0.079 in) Type LR1110 - 723E HITACHI make Nominal rating 12 V - 110 A Ground polarity Negative Minimum revolution under no-load (When 13.5 V is applied) Less than 1,100 rpm Hot output current (When 13.5 V is applied) (More than 35 A/1,300 rpm) More than 70 A/1,800 rpm More than 91 A/2,500 rpm More than 110 A/5,000 rpm Regulated output voltage 14.1 - 14.7 V Minimum length of brush More than 6.00 mm (0.236 in) Brush spring pressure 1.00 - 3.43 N (102 - 350 g, 3.60 - 12.34 oz) Slip ring minimum outer diameter More than 26.0 mm (1.024 in) Rotor (Field coil) resistance 2.16 - 2.45 Ω |