|
|
CAN SYSTEM (TYPE 7) LAN-285 [CAN] C D E F G H I J L M A B LAN Revision: 2005 August 2005 Murano 2. CHECK HARNESS FOR OPEN CIRCUIT 1. Disconnect harness connector M9. 2. Check continuity between data link connector M24 terminals 6 OK or NG OK >> GO TO 3. NG >> Repair harness. 3. CHECK HARNESS FOR OPEN CIRCUIT 1. Disconnect harness connector B4. 2. Check continuity between harness connector B2 terminals 1 (L), OK or NG OK >> Connect all the connectors and diagnose again. Refer to LAN-7, "TROUBLE DIAGNOSES WORK FLOW" NG >> Repair harness. Inspection Between Driver Seat Control Unit and AWD Control Unit Circuit AKS00CJK 1. CHECK CONNECTOR 1. Turn ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check following terminals and connectors for damage, bend and loose connection (connector side and – Harness connector B4 – Harness connector E105 OK or NG OK >> GO TO 2. NG >> Repair terminal or connector. 2. CHECK HARNESS FOR OPEN CIRCUIT 1. Disconnect harness connector B4. 2. Check continuity between harness connector B2 terminals 1 (L), OK or NG OK >> GO TO 3. NG >> Repair harness. 6 (L) - 1 (L) : Continuity should exist. 14 (Y) - 13 (Y) : Continuity should exist. PKIB5307E 1 (L) - 4 (L) : Continuity should exist. 13 (Y) - 10 (Y) : Continuity should exist. PKIB5308E 1 (L) - 4 (L) : Continuity should exist. 13 (Y) - 10 (Y) : Continuity should exist. PKIB5308E |