Nissan Murano Z50 (2005 year). Manual - part 77
WARNING CHIME
DI-69
C
D
E
F
G
H
I
J
L
M
A
B
DI
Revision: 2005 August
2005 Murano
Terminals and Reference Value for Combination Meter
AKS00D60
Trouble Diagnosis
AKS00D61
HOW TO PERFORM TROUBLE DIAGNOSIS
1.
Confirm the symptom or customer complaint.
2.
Understand operation description and function description. Refer to
3.
Perform the preliminary check. Refer to
4.
Select “METER A/C AMP” on CONSULT-II, and perform self-diagnosis of unified meter and A/C amp.
Refer to
DI-31, "CONSULT-II Function (METER A/C AMP)"
. When no malfunction detected, go to next
step 5. When malfunction detected, go to
in “COMBINATION METER”
5.
Check symptom and repair or replace the cause of malfunction.
6.
Does the warning chime operate normally? If so, GO TO 7. If not, GO TO 5.
7.
INSPECTION END
PRELIMINARY CHECK
Inspection for Power Supply and Ground Circuit
1.
CHECK FUSE AND FUSIBLE LINK
Check for blown BCM fuses and fusible link.
OK or NG
OK
>> GO TO 2.
NG
>> If fuse is blown, be sure to eliminate cause of malfunction before installing new fuse. Refer to
3, "POWER SUPPLY ROUTING CIRCUIT"
.
Terminal
No.
Wire
color
Item
Measuring condition
Reference value (V)
Ignition
switch
Operation or condition
3
LG
Seat belt buckle switch
(Driver side)
ON
Unfastened (ON)
Approx. 0
Fastened (OFF)
Approx. 12
18
R/L
TX communication line (To
unified meter and A/C amp.)
ON
—
19
R/B
RX communication line
(From unified meter and A/C
amp.)
ON
—
20
O
Ignition switch ON or START
ON
—
Battery voltage
21
Y/R
Battery power supply
OFF
—
Battery voltage
22
B
Ground
ON
—
Approx. 0
23
24
SKIA3361E
SKIA3362E
Unit
Power source
Fuse and fusible link No.
BCM
Battery
F
18
Ignition switch ON or START
1