Content .. 17 18 19 20 ..

Nissan Murano Z50 (2005 year). Manual - part 19

NAVIGATION SYSTEM

AV-111

Revision: 2005 August

2005 Murano

Display with Pressed “SETTING” Button

The function of each icon is as follows:

Display Settings

How To Perform Display Settings.

Start the engine.

Press “SETTING” button.

Select “Display”.

Application Items

Brightness/Contrast/Map Background

Select “Brightness/Contrast/Map Background”.

●

Brightness, Contrast and Back ground are shown at the lower part of the screen, and it can be set by
pressing joystick.

Display Off

Select “Display Off”.

●

When setting is turned on (Indicator light ON), the display will be under sleep mode.

Setting Of the Under Section Display

Select “Setting of the under section display”.

●

The setting status that is selected from A/C or AV is shown at the lower part of the screen.

SKIA4496E

Icon

Description

Display

Settings of display can be performed.

Vehicle Electronic Systems

Settings of vehicle electrical equipment can be performed.

System Settings

Settings of linguistic select, time adjusting and beep sound can be performed.

Navigation

Settings and adjusting of navigation can be performed.

Short Menus

Easy Mode and Expert Easy Mode can be switched.

Guidance Volume

The volume and/or on/off of voice prompt can be controlled by the joystick.

Help (only easy mode)

Explanation of navigational functions appear on the display.

SKIA5791E

Icon

Description

Reference

page

Brightness/Contrast/Map Background

Brightness, Contrast and Map Background can be set.

AV-111

Display Off

Display sleep mode ON/OFF can be switched.

AV-111

Setting of the under section display

The setting status of A/C or AV can be shown.

AV-111

AV-112

NAVIGATION SYSTEM

Revision: 2005 August

2005 Murano

Vehicle Electronic Systems

How To Perform Vehicle Electronic Systems.

Start the engine.

Press “SETTING” button.

Select “Vehicle Electronic Systems”.

Application Items

*1: If so equipped
*2: If Intelligent Key is equipped
*3: Even if you change the horn chirp or the hazard flash with the keyfob or the Intelligent Key, the change may not be reflected in the
display. Use the keyfob or the Intelligent Key to return to the previous mode.

SKIA9490E

Icon

Description

Adjust Driver Seat When Exiting Vehicle

The driver's seat automatically moves back and returns to the original position for ease
of exit and entry.

Selective Door Unlock

/Remote Unlock

Driver's Door First

This key can switch the unlock doors of the 1st unlocking operation as follows:
ON (Only the driver side door)

⇔

OFF (All the doors)

Keyless Remote Response - Horn

This key changes the horn chirp mode that occurs when pressing the LOCK button on
the Intelligent Key or the keyfob.

Keyless Remote Response - Lights

This key changes the hazard indicator flash mode that occurs when pressing the LOCK
or UNLOCK button on the Intelligent Key or the keyfob.

Auto Re-Lock Time

The length of the auto door re-lock time can be set. Select the “Auto Re-Lock time” key,
then move the joystick and press the ENTER button to adjust the time.

Sensitivity of Automatic Headlights

Automatic light illumination can be set as desired. Select the “Sensitivity of Automatic
Headlights” key, then move joystick to the left (lower) or right (higher).

Automatic Headlights Off Delay

You can control how long it takes the automatic turn off timer to extinguish the head-
lights in the AUTO position. Select the “Automatic Headlights Off Delay” key, then move
the joystick to the left or right to adjust the timer.

Speed Dependent Wiper

This key turns on and off the driving speed dependent intermittent wiper function.

Intelligent Key Lock Response - Sound

The sound pattern of the Intelligent request switch operation can be set as desired.
Select the “Intelligent Key lock response - Sound” key, then press the ENTER button to
change the sound pattern.

Intelligent Key Unlock Response - Sound

The beep sounds when unlocking door with the Intelligent request switch can be turned
on or off.

Return All Settings to Default

When this key is selected and turned on using the “ENTER” button, all settings made
by VEHICLE ELECTRONICS will return to the initial conditions.

NAVIGATION SYSTEM

AV-113

Revision: 2005 August

2005 Murano

System Settings

How To Perform System Settings.

Start the engine.

Press “SETTING” button.

Select “System Settings”.

Application Items

Language Setting

Select “Language/ Unit”.

●

Language setting can be switched.

●

Unit setting can be changed.

Clock Settings

Select “Clock”.

●

Select the “Hours” or “Minutes” key and tilt the joystick to the
right or left to adjust the time.

●

Turn ON and OFF daylight saving time.

●

Select the “Auto Adjust” key. The time will be reset to the GPS
time.

●

Select the “Select Time Zone” key. The [TIME ZONE] screen will
appear.

SKIA4536E

Icon

Description

Reference

page

Language/Unit

Settings of Language or unit can be performed.

AV-113

Clock

Settings of clock can be performed.

AV-113

Beep Setting

Settings of Beep sound can be performed.

AV-114

SKIA2065E

SKIA2063E

AV-114

NAVIGATION SYSTEM

Revision: 2005 August

2005 Murano

Beep Setting

Select “Beep Setting”.

●

When Beep Setting is on (indicator light on), a beep will sound if
the button is pressed.

NOTE:
Items in exception of Beep Setting ON/OFF.

●

An error beep.

●

An interrupted-screen beep.

Navigation Settings

How To Perform Navigation Settings.

Start the engine.

Press “SETTING” button.

Select “Navigation”.

Application Items

SKIA4829E

SKIA0551E

Icon

Description

Reference

page

View

Map display mode can be switched.

AV-115

Heading

Heading of the map display can be customized for either north heading or the
actual driving direction of the vehicle.

AV-115

Nearby Display Icons

Icons of facilities can be displayed.
Facilities to be displayed can be selected from the variety selections.

AV-115

Save Current Location

Current vehicle location can be registered in Address Book.

AV-115

Adjust Current Location

Current location of position marker can be adjusted. Direction of position marker
also can be calibrated when heading direction of the vehicle on the display is
not matched with the actual direction.

AV-116

Auto Re-route On/Off

ON/OFF of Auto Re-route can be switched.

AV-116

Avoid Area Setting

A particular area can be avoided when routing.

AV-116

Clear Memory

Address Book, Previous destination or Avoid area can be deleted.

AV-117

Edit Address Book

Address Book can be edited.

AV-117

GPS Information

The GPS data includes longitude, latitude and altitude (distance above sea
level) of the present vehicle position, and current date and time for the area in
which the vehicle is being driven.
Also indicated are the GPS reception conditions and the GPS satellite position.

AV-117

Quick Stop Customer Setting

One facility of your selection can be added to your Quick Stop.

AV-117

Set Average Speed for Estimated
Journey Time

Average vehicle speed can be set to calibrate estimated journey time for the
destination.

AV-118

Tracking On/Off

Tracking to the present vehicle position can be displayed.

AV-118

NAVIGATION SYSTEM

AV-115

Revision: 2005 August

2005 Murano

“VIEW” MODE

●

To open the map screen display with BIRDVIEW

™

, select

“BIRDVIEW”

●

To open the map screen display with Plan View, select “Plan
View”.

“HEADING” MODE

●

To display North up, select “North up”.

●

To display the car heading up, select “Heading up”.

“NEARBY DISPLAY ICONS” MODE

●

Select an icon to display on the map screen.

“SAVE CURRENT LOCATION” MODE

●

The current vehicle location can be registered in “Address
Book”.

NOTE:
“Address Book” can store 50 items max.

SKIA0554E

SKIA0561E

SKIA0562E

SKIA0556E

AV-116

NAVIGATION SYSTEM

Revision: 2005 August

2005 Murano

“ADJUST CURRENT LOCATION” MODE

●

Select an icon “right” or “left” to calibrate the heading direction.
(Arrow marks will rotate corresponding to the calibration key.)

●

Select “Set”. Then the vehicle mark will be matched to the arrow
mark.

“AUTO RE-ROUTE” MODE

●

To activate “AUTO RE-ROUTE” mode, select “On”.

●

To disactivate “AUTO RE-ROUTE” mode, select “Off”.

“AVOID AREA SETTINGS” MODE

●

Areas to avoid can be registered.

SKIA0563E

SKIA0564E

SKIA0558E

SKIA0563E

NAVIGATION SYSTEM

AV-117

Revision: 2005 August

2005 Murano

“CLEAR MEMORY” MODE

●

To delete all the stored places in “Address Book”, “Avoid Area”
and “Previous Dest”, select “Yes”.

“EDIT ADDRESS BOOK” MODE

●

Edit the items registered in Address Book.

“GPS INFORMATION” MODE

●

Latitude, longitude, altitude, astrometric state, and satellite loca-
tion are displayed as GPS information.

NOTE:
Altitude is displayed only in three–dimensional status.

“QUICK STOP CUSTOMER SETTING” MODE

●

Select a category for the “Quick Stop” menu.

SKIA3572E

SKIA3511E

SKIA0555E

SKIA5820E

AV-118

NAVIGATION SYSTEM

Revision: 2005 August

2005 Murano

“SET AVERAGE SPEED” MODE

●

Set the average vehicle speed to calibrate the estimated journey
time for the destination.

●

Set three items; “Freeway”, “Main Roads”, and “Ordinary
Roads”.

“TRACKING” MODE

●

To delete the tracking marks on the map, select “Off”.

●

To leave the tracking marks on the map, select “On”.

NOTE:
When a trail display is turned Off, trail data is erased from the mem-
ory.

GUIDANCE VOLUME
Description

Following guidance volume setting can be changed.

Activation/Deactivation Setting

●

The voice prompt can be turned on/off by pressing the “Guidance Volume” button.

Voice Volume Setting

●

Volume of the voice can be controlled by bending the joystick to left/right.

SKIA0565E

SKIA0559E

SKIA4497E

NAVIGATION SYSTEM

AV-119

Revision: 2005 August

2005 Murano

DISPLAY WITH PRESSED “TRIP” BUTTON

●

When the “TRIP” button is pressed, the following models will display on the screen.

●

Warning message (if there are any)

→

TRIP 1

→

TRIP 2

→

FUEL ECONOMY

→

MAINTENANCE

→

OFF.

TRIP 1 OR TRIP 2

●

Elapsed time, Driving distance and Average speed are dis-
played as Trip 1 information or Trip 2 information.

●

The way to reset is by pressing the “Reset” switch or by keeping
pressing “TRIP” button more than 1.5 seconds.

FUEL ECONOMY

●

Average Fuel Economy, Distance to Empty, Fuel Economy are
displayed as Fuel Economy information.

●

The way to reset is by pressing the “Reset” switch or by keeping
pressing “TRIP” button more than 1.5 seconds.

Display items

Display/Setting contents

Reference

page

Trip 1 or Trip 2

Elapsed Time

Displays driving time with a range of 0000:00:00 to
9999:59:59.

AV-119, "TRIP

1 OR TRIP 2"

Driving Distance
[(miles) or (km)]

Displays driving distance with a range of 00000.0 to
99999.9.

Average speed
[(MPH) or (km/h)]

Displays average speed with a range of 000.0 to 999.9.

Fuel Economy

Average Fuel Economy
[(MPG) or (l/100km)]

Displays fuel economy with ignition switch ON, average
fuel economy each 30 minutes.

AV-119,

"FUEL

ECONOMY"

Distance to Empty
[(miles) or (km)]

Displays possible driving distance with remaining fuel.

Fuel Economy
[(MPG) or (l/100km)]

Displays fuel economy each approx. 100 ms.

Maintenance

Engine oil

Maintenance intervals of engine oil and setting of oil
change cycle.

AV-120,

"MAINTE-

NANCE"

Tire rotation

Maintenance intervals of tire and setting of tire replace-
ment cycle.

Tire pressure

Tire pressure displayed as tire pressure information.

SKIA4526E

SKIA4527E

AV-120

NAVIGATION SYSTEM

Revision: 2005 August

2005 Murano

MAINTENANCE

●

Engine Oil, Tire Rotation and Tire pressure are displayed as
Maintenance information.

NOTE:
In a case of a vehicle with Low tire pressure warning control unit,
“Tire Pressure” switch is displayed.

ENGINE OIL OR TIRE ROTATION

●

Possible to set up interval of engine oil and tire rotation by mov-
ing joystick right and left.

TIRE PRESSURE

●

Pressure indication in

psi on the screen indicates that the

pressure is being measured. After a few driving trips, the pres-
sures for all four tires will be displayed.

●

The order of tire pressure figures displayed on the screen does
not correspond with the actual order of the tire position.

●

Tire pressure rises and falls depending on the heat caused by
the vehicle's traveling condition and the temperature.

●

In case of low tire pressure, the low tire pressure warning light
will come on and/or a warning is displayed on the screen.

●

FLAT TIRE–very low tire air pressure.

NOTE:

●

In a case of FLAT TIRE pressure, interrupt screen is not shown on the display.

●

On the screen of TIRE PRESSURE, “FLAT TIRE”, “Check”, “All tire” is displayed.

SKIA4528E

SKIA4650E

SKIA4651E

NAVIGATION SYSTEM

AV-121

Revision: 2005 August

2005 Murano

WARNING INDICATIONS

Warning signal (Door switch signal) is received from BCM through
CAN communication line.

REAR VIEW SCREEN

When A/T selector lever is in R position, rear view image is dis-
played on the display.

Image Quality Adjustment

●

When pressing “SETTING” switch at rear view image, image
quality can be adjusted.

●

The image quality of the rear view image and the image quality
of the RGB screen can be separately set. And then, it can be
separately set when lighting switch is ON or OFF.

CAN Communication System Description

AKS007PX

CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle mul-
tiplex communication line with high data communication speed and excellent error detection ability. Modern
vehicles are equipped with many electronic control units and each control unit shares information and links
with other control units during operation (not independent). In CAN communication, control units are con-
nected with 2 communication lines (CAN H line, CAN L line) allowing a high rate of information transmission
with less wiring. Each control unit transmits/receives data but selectively reads required data only.

CAN Communication Unit

AKS007PY

Refer to

LAN-29, "CAN Communication Unit"

SKIA5609E

Warning indicators

Warning lamps in

instrument panel

Warning detection and cancel conditions

Cases of malfunction

DOOR OPEN

Door

Detection condition

Vehicle is running [approx. 5 km/h
(3 MPH) or faster] and door ajar of
any of the doors is detected.

Door is open

Cancel condition

Vehicle is stopped and all the
doors lock.

SKIB3094E

SKIB3095E

AV-122

NAVIGATION SYSTEM

Revision: 2005 August

2005 Murano

Component Parts and Harness Connector Location

AKS004R6

SKIB2700E

NAVIGATION SYSTEM

AV-123

Revision: 2005 August

2005 Murano

Schematic — NAVI —

AKS004R8

TKWB0518E

AV-124

NAVIGATION SYSTEM

Revision: 2005 August

2005 Murano

TKWB0905E

NAVIGATION SYSTEM

AV-125

Revision: 2005 August

2005 Murano

Wiring Diagram — NAVI —

AKS004R9

TKWB0906E

AV-126

NAVIGATION SYSTEM

Revision: 2005 August

2005 Murano

TKWB0519E

Content .. 17 18 19 20 ..