|
|
CAN SYSTEM (TYPE 2) LAN-57 [CAN] C D E F G H I J L M A B LAN Revision: 2004 November 2004 Murano Work Flow AKS00A4O 1. When there are no indications of “TRANSMISSION”, “BCM”, “METER A/C AMP”, or “IPDM E/R” on 2. Print all the data of “SELF-DIAG RESULTS” for “ENGINE”, “TRANSMISSION”, “BCM”, “METER A/C 3. Print all the data of “CAN DIAG SUPPORT MNTR” for “ENGINE”, “TRANSMISSION”, “BCM”, “METER A/ 4. Attach the printed sheet of “SELECT SYSTEM”, “SELF-DIAG RESULTS” and “CAN DIAG SUPPORT 5. Based on the indications of “SELECT SYSTEM” and the results of “CAN DIAG SUPPORT MNTR”, put . NOTE: ● If “NG” is displayed on “INITIAL DIAG (Initial diagnosis)” as “CAN DIAG SUPPORT MNTR” for the diag- ● The “CAN DIAG SUPPORT MNTR” items, which are not in check sheet table, are not related to diag- 6. Check CAN communication line of the navigation system. Refer to AV-175, "CAN Communication Line . 7. Attach the CAN DIAG SUPPORT MONITOR check sheet onto the check sheet. Refer to PKIA2093E PKIA8260E PKIA8343E |