|
|
REAR BUMPER EI-19 C D E F G H J K L M A B EI Revision: 2004 November 2004 Murano REMOVAL 1. Remove rear combination lamp assembly. Refer to LT-165, "Removal and Installation" . 2. Remove bumper fascia bolts from both right/left rear fender. 3. Remove upper portion of bumper fascia clips, and remove clips of lower portion. 4. Pull out center of bumper fascia, and pull out side of bumper fascia from clips. 5. Remove bumper fascia assembly. 6. Remove rear bumper energy absorber. 7. Remove bumper reinforcement nuts and remove bumper reinforce assembly. INSTALLATION Install in the reverse order of removal. REAR BUMPER CLOSING 1. Remove clips of bumper closing. 2. Remove bumper closing. Installation Install in the reverse order of removal. DRAFTER GUARD 1. Remove nut and bolt of drafter guard. 2. Remove drafter guard assembly. Installation Install in the reverse order of removal. PIIA3839E PIIA3840E |