|
|
LAN-350 [CAN] CAN SYSTEM (TYPE 10) Revision; 2004 April 2003 Murano BCM Circuit Check AKS006TZ 1. CHECK CONNECTOR 1. Turn ignition switch OFF. 2. Disconnect the negative battery terminal. 3. Check terminals and connector of BCM for damage, bend and loose connection (control module side and OK or NG OK >> GO TO 2. NG >> Repair terminal or connector. 2. CHECK HARNESS FOR OPEN CIRCUIT 1. Disconnect BCM connector. 2. Check resistance between BCM harness connector M37 termi- OK or NG OK >> Replace BCM. Refer to BCS-36, "Removal and Installa- NG >> Repair harness between BCM and data link connector. Unified Meter and A/C Amp. Circuit Check AKS006U0 1. CHECK CONNECTOR 1. Turn ignition switch OFF. 2. Disconnect the negative battery terminal. 3. Check terminals and connector of unified meter and A/C amp. for damage, bend and loose connection OK or NG OK >> GO TO 2. NG >> Repair terminal or connector. 2. CHECK HARNESS FOR OPEN CIRCUIT 1. Disconnect unified meter and A/C amp. connector. 2. Check resistance between unified meter and A/C amp. harness OK or NG OK >> Replace unified meter and A/C amp. NG >> Repair harness between unified meter and A/C amp. and data link connector. 70 (L) - 71 (Y) : Approx. 54 - 66 Ω LKIA0028E 1 (L) - 11 (Y) : Approx. 54 - 66 Ω PKIA2078E |