Nissan Murano Z50 (2003 year). Manual - part 17
INTEGRATED DISPLAY SYSTEM
AV-65
C
D
E
F
G
H
I
J
L
M
A
B
AV
Revision; 2004 April
2003 Murano
SETTING SCREEN
●
Setting of electric status can be changed by A/C and AV switch. The signal is sent to BCM through display
unit to change vehicle electric system setting.
●
Display unit is communicating with seat ECU.
●
Pressing “SETTING” switch once cycles display from DISPLAY
→
LANGUAGE
→
BEEP SET
→
SERVICE
ALERT
→
PERSONALIZED SETTINGS MENU
→
DISPLAY OFF
→
DISPLAY.
●
Using the joystick, setting of each item will become possible.
Adjustable Vehicle Status
NOTE:
Setting in factory shipment is ON.
D/N SCREEN
●
When D/N switch is pressed, change screen of adjustment lumi-
nance.
●
If press D/N again when display adjustment luminance, change
DAY-NIGHT(NIGHT-DAY) mode (screen of adjustment lumi-
nance).
As follows:
●
Press “PREV” or not operate for 10sec. when displayed screen
of adjustment luminance, back to default screen (same mode).
●
Can adjust luminance by joystick (R/L) in adjustment screen.
●
Adjustment range is a 12 stage (MIN to MAX) and default set value is 10(DAY) and 4(NIGHT).
WARNING INDICATIONS
When unified meter and A/C amp. receives warning signal from some control units or sensors, then combina-
tion meter warning lamp is illuminated.
Then unified meter and A/C amp. sends warning signal to display unit warning indications on the screen.
Setting items
Setting
variations
Initial
setting
Operation
DISPLAY
ON/OFF
ON
It switches displayed/Non-displayed of the screen.
LANGUAGE
ENGLISH/
FRANCAIS
–
It switches displayed language.
BEEP SET
ON/OFF
ON
It selects beep sound ON/OFF during switch operation.
SERVICE ALERT
ON/OFF
OFF
It switches displayed/Non-displayed of alert indication.
●
When the setting is ON, if engine oil or tire rotation will be replace
distance, alert is displayed.
●
When the setting is OFF, alert is not displayed.
PERSONALIZED
SETTINGS MENU
SLIDE BACK DR
SEAT ON EXIT
ON/OFF
OFF
Note
The driver’s seat automatically slides backward when the driver gets
out, and returns to the original position when the driver gets on.
Details; the same as above
CONFIRM
RESET
SETTINGS
YES/NO
OFF
If YES is selected, all setting items are return to default.
Now
Change display
DAY
DAY (adjustment)
→
NIGHT (adjustment)
→
DAY (adjustment)
→
·····
NIGHT
NIGHT (adjustment)
→
DAY (adjustment)
→
NIGHT (adjustment)
→
·····
SKIA4374E
Warning indicators
Warning lamps in
instrument panel
Warning detection and cancel conditions
Cases of malfunction
DOOR OPEN
Door
Detection
condition
Vehicle is running [approx. 5 km/h (3 MPH) or
faster] and door ajar of any of the doors is
detected.
Door is open
Cancel
condition
Vehicle is stopped and all the doors lock.