Nissan Murano Z51 (2008 year). Manual - part 389

VTL-44

< ON-VEHICLE REPAIR >

[WITHOUT 7 INCH DISPLAY]

HEATER CORE

HEATER CORE

Exploded View

INFOID:0000000003464591

1.

Ventilator seal

2.

Upper ventilator seal

3.

Defroster seal

4.

Adapter case

5.

Center case

6.

Intake sensor bracket

7.

Intake sensor

8.

Upper ventilator door motor

9.

Upper ventilator door rod

10. Upper ventilator door lever

11.

Filter cover

12.

In-cabin microfilter

13. Foot duct 1 (right)

14.

Foot duct 2 (right)

15.

Air mix door motor (passenger side)

16. Heater & cooling unit case cover

17.

Evaporator pipe assembly

18.

O-ring

19. Evaporator

20.

Expansion valve

21.

Case packing

22. Grommet

23.

Cooler pipe grommet

24.

Drain hose

25. Heater & cooling unit case (right)

26.

Air mix door (Slide door)

27.

Heater pipe support

28. Heater pipe grommet

29.

Heater & cooling unit case (left)

30.

Heater core 

31. Heater pipe cover

32.

Foot duct 2 (left)

33.

Foot duct 1 (left)

34. Heater duct

35.

Aspirator

36.

Aspirator hose

37. Mode door motor

38.

Main link

39.

Rod link

40. Max. cool door link

41.

Ventilator door link

42.

Foot door link

43. Mode door lever

44.

Defroster door link

45.

Ventilator door lever

46. Foot door lever

47.

Defroster door lever

48.

Max. cool door lever

JPIIA0454GB

Revision: 2008 October

2009 Murano

HEATER CORE

VTL-45

< ON-VEHICLE REPAIR >

[WITHOUT 7 INCH DISPLAY]

C

D

E

F

G

H

J

K

L

M

A

B

VTL

N

O

P

Removal and Installation

INFOID:0000000003072915

REMOVAL

1.

Remove the heater & cooling unit assembly. Refer to 

VTL-35, "Exploded View"

. 

2.

Remove the mounting screws (A), and then remove the foot
duct (left) (1). 

3.

Remove the heater pipe grommet (1). 

4.

Remove the mounting screw (A), and then remove the heater
pipe support (2). 

5.

Remove the mounting screws (B), and then remove the heater
pipe cover (3). 

6.

Slide the heater core (1) in the direction shown by the arrow, and
then remove it. 

INSTALLATION

Install in the reverse order of removal.

CAUTION:

• Replace the O-ring with a new one. Apply a coat of compressor oil to the O-ring prior to installation. 
• Check for refrigerant leakage when charging refrigerant.
NOTE:
• Refer to 

CO-9, "Refilling"

 when filling the radiator with engine coolant. 

• Charge the refrigerant again. 

49.

Air mix door motor (driver side)

50.

Distributor upper case

51. Distributor lower case

52.

Ventilator door

53.

Foot door

54. Max. cool door

55.

Defroster door

56.

Upper ventilator door

Refer to 

GI-4, "Components"

 for symbols in the figure.

JPIIA0579ZZ

JPIIA0580ZZ

JPIIA0581ZZ

Revision: 2008 October

2009 Murano

VTL-46

< ON-VEHICLE REPAIR >

[WITHOUT 7 INCH DISPLAY]

DUCT AND GRILLE

DUCT AND GRILLE

CENTER VENTILATOR GRILLE

CENTER VENTILATOR GRILLE : Exploded View

INFOID:0000000003072916

CENTER VENTILATOR GRILLE : Removal and Installation

INFOID:0000000003072917

REMOVAL

1.

Remove the cluster lid A. Refer to 

IP-11, "Exploded View"

. 

2.

Remove the cluster lid D. Refer to 

IP-11, "Exploded View"

.

1.

Defroster nozzle

2.

Side defroster nozzle (left)

3.

Foot duct (left)

4.

Heater duct

5.

Heater & cooling unit assembly

6.

Ventilator duct

7.

Side defroster grille (left)

8.

Instrument panel assembly

9.

Side ventilator grille (left)

10. Center ventilator grille assembly

11. Side ventilator grille (right)

12. Side defroster grille (right)

13. Center speaker grille

14. Blower unit assembly

15. Foot duct (right)

16. Side defroster nozzle (right)

17. Upper ventilator duct

JPIIA1225ZZ

Revision: 2008 October

2009 Murano

DUCT AND GRILLE

VTL-47

< ON-VEHICLE REPAIR >

[WITHOUT 7 INCH DISPLAY]

C

D

E

F

G

H

J

K

L

M

A

B

VTL

N

O

P

3.

Remove the mounting screws (A), and then remove the center
ventilator grille assembly (1). 

INSTALLATION

Install in the reverse order of removal.

SIDE VENTILATOR GRILLE

SIDE VENTILATOR GRILLE : Exploded View

INFOID:0000000003465023

SIDE VENTILATOR GRILLE : Removal and Installation

INFOID:0000000003072919

REMOVAL

JPIIA0582ZZ

1.

Defroster nozzle

2.

Side defroster nozzle (left)

3.

Foot duct (left)

4.

Heater duct

5.

Heater & cooling unit assembly

6.

Ventilator duct

7.

Side defroster grille (left)

8.

Instrument panel assembly

9.

Side ventilator grille (left)

10. Center ventilator grille assembly

11. Side ventilator grille (right)

12. Side defroster grille (right)

13. Center speaker grille

14. Blower unit assembly

15. Foot duct (right)

16. Side defroster nozzle (right)

17. Upper ventilator duct

JPIIA1225ZZ

Revision: 2008 October

2009 Murano

VTL-48

< ON-VEHICLE REPAIR >

[WITHOUT 7 INCH DISPLAY]

DUCT AND GRILLE

1.

Remove the instrument side finisher (LH/RH). Refer to 

IP-11, "Exploded View"

. 

2.

Remove the mounting screw (A). 

3.

Remove side ventilator grille metal clip using remover tool (B),
and then remove side ventilator grille (1).

INSTALLATION

Install in the reverse order of removal.

SIDE DEFROSTER GRILLE

SIDE DEFROSTER GRILLE : Exploded View

INFOID:0000000003465024

: Metal clip

JPIIA0583ZZ

1.

Defroster nozzle

2.

Side defroster nozzle (left)

3.

Foot duct (left)

4.

Heater duct

5.

Heater & cooling unit assembly

6.

Ventilator duct

7.

Side defroster grille (left)

8.

Instrument panel assembly

9.

Side ventilator grille (left)

10. Center ventilator grille assembly

11. Side ventilator grille (right)

12. Side defroster grille (right)

13. Center speaker grille

14. Blower unit assembly

15. Foot duct (right)

16. Side defroster nozzle (right)

17. Upper ventilator duct

JPIIA1225ZZ

Revision: 2008 October

2009 Murano

DUCT AND GRILLE

VTL-49

< ON-VEHICLE REPAIR >

[WITHOUT 7 INCH DISPLAY]

C

D

E

F

G

H

J

K

L

M

A

B

VTL

N

O

P

SIDE DEFROSTER GRILLE : Removal and Installation

INFOID:0000000003072921

REMOVAL

1.

Remove the defroster nozzle and side defroster nozzle. Refer to 

VTL-52, "DEFROSTER NOZZLE AND

SIDE DEFROSTER NOZZLE : Exploded View"

. 

2.

Remove the mounting screws (A), and then remove the side
defroster grilles (left/right) (1). 

INSTALLATION

Install in the reverse order of removal.

VENTILATOR DUCT

VENTILATOR DUCT : Exploded View

INFOID:0000000003465025

JPIIA0584ZZ

1.

Defroster nozzle

2.

Side defroster nozzle (left)

3.

Foot duct (left)

4.

Heater duct

5.

Heater & cooling unit assembly

6.

Ventilator duct

7.

Side defroster grille (left)

8.

Instrument panel assembly

9.

Side ventilator grille (left)

10. Center ventilator grille assembly

11. Side ventilator grille (right)

12. Side defroster grille (right)

JPIIA1225ZZ

Revision: 2008 October

2009 Murano

VTL-50

< ON-VEHICLE REPAIR >

[WITHOUT 7 INCH DISPLAY]

DUCT AND GRILLE

VENTILATOR DUCT : Removal and Installation

INFOID:0000000003072923

REMOVAL

1.

Remove the defroster nozzle and side defroster nozzle. Refer to 

VTL-52, "DEFROSTER NOZZLE AND

SIDE DEFROSTER NOZZLE : Exploded View"

. 

2.

Remove the mounting screws (A), and then remove the ventilator duct (1). 

INSTALLATION

Install in the reverse order of removal.

UPPER VENTILATOR DUCT

13. Center speaker grille

14. Blower unit assembly

15. Foot duct (right)

16. Side defroster nozzle (right)

17. Upper ventilator duct

JPIIA0585ZZ

Revision: 2008 October

2009 Murano

DUCT AND GRILLE

VTL-51

< ON-VEHICLE REPAIR >

[WITHOUT 7 INCH DISPLAY]

C

D

E

F

G

H

J

K

L

M

A

B

VTL

N

O

P

UPPER VENTILATOR DUCT : Exploded View

INFOID:0000000003465026

UPPER VENTILATOR DUCT : Removal and Installation

INFOID:0000000003072925

REMOVAL

1.

Remove the defroster nozzle and side defroster nozzle. Refer to 

VTL-52, "DEFROSTER NOZZLE AND

SIDE DEFROSTER NOZZLE : Exploded View"

. 

2.

Remove the mounting screws (A), and then remove the upper
ventilator duct (1). 

INSTALLATION

Install in the reverse order of removal.

1.

Defroster nozzle

2.

Side defroster nozzle (left)

3.

Foot duct (left)

4.

Heater duct

5.

Heater & cooling unit assembly

6.

Ventilator duct

7.

Side defroster grille (left)

8.

Instrument panel assembly

9.

Side ventilator grille (left)

10. Center ventilator grille assembly

11. Side ventilator grille (right)

12. Side defroster grille (right)

13. Center speaker grille

14. Blower unit assembly

15. Foot duct (right)

16. Side defroster nozzle (right)

17. Upper ventilator duct

JPIIA1225ZZ

JPIIA0586ZZ

Revision: 2008 October

2009 Murano

VTL-52

< ON-VEHICLE REPAIR >

[WITHOUT 7 INCH DISPLAY]

DUCT AND GRILLE

DEFROSTER NOZZLE AND SIDE DEFROSTER NOZZLE

DEFROSTER NOZZLE AND SIDE DEFROSTER NOZZLE : Exploded View

INFOID:0000000003465027

DEFROSTER NOZZLE AND SIDE DEFROSTER NOZZLE : Removal and Installation

INFOID:0000000003072927

REMOVAL

1.

Remove the instrument panel assembly. Refer to 

IP-11, "Exploded View"

. 

1.

Defroster nozzle

2.

Side defroster nozzle (left)

3.

Foot duct (left)

4.

Heater duct

5.

Heater & cooling unit assembly

6.

Ventilator duct

7.

Side defroster grille (left)

8.

Instrument panel assembly

9.

Side ventilator grille (left)

10. Center ventilator grille assembly

11. Side ventilator grille (right)

12. Side defroster grille (right)

13. Center speaker grille

14. Blower unit assembly

15. Foot duct (right)

16. Side defroster nozzle (right)

17. Upper ventilator duct

JPIIA1225ZZ

Revision: 2008 October

2009 Murano

DUCT AND GRILLE

VTL-53

< ON-VEHICLE REPAIR >

[WITHOUT 7 INCH DISPLAY]

C

D

E

F

G

H

J

K

L

M

A

B

VTL

N

O

P

2.

Remove the mounting screws (A), and then remove the defroster nozzle (1) together with the side
defroster nozzle (right) (2) and side defroster nozzle (left) (3). 

3.

Remove the side defroster nozzle (right) and side defroster nozzle (left) from the defroster nozzle. 

INSTALLATION

Install in the reverse order of removal.

REAR VENTILATOR GRILLE

REAR VENTILATOR GRILLE : Exploded View

INFOID:0000000003465029

JPIIA0587ZZ

JPIIA0457ZZ

Revision: 2008 October

2009 Murano

VTL-54

< ON-VEHICLE REPAIR >

[WITHOUT 7 INCH DISPLAY]

DUCT AND GRILLE

REAR VENTILATOR GRILLE : Removal and Installation

INFOID:0000000003072931

REMOVAL

1.

Remove the center pillar lower garnish (left/right). Refer to 

INT-19, "Exploded View"

. 

2.

Disengage the joints of the tabs, and then remove the rear venti-
lator grilles (left/right) (1). 

INSTALLATION

Install in the reverse order of removal.

REAR VENTILATOR DUCT 1

1.

Heater & cooling unit assembly

2.

Rear ventilator duct 4 (center pillar lower 
garnish left)

3.

Rear ventilator grille (left)

4.

Rear ventilator duct 3 (left)

5.

Rear ventilator duct 3 (right)

6.

Rear ventilator grille (right)

7.

Rear ventilator duct 4 (center pillar lower 
garnish right)

8.

Rear foot duct 1 (right)

9.

Rear ventilator duct 1

10.

Rear foot duct 1 (left)

11.

Rear foot duct 2 (left)

12. Rear foot duct 3 (left)

13.

Rear ventilator duct 2

14.

Rear foot duct 3 (right)

15. Rear foot duct 2 (right)

:Clip

JPIIA0588ZZ

Revision: 2008 October

2009 Murano

DUCT AND GRILLE

VTL-55

< ON-VEHICLE REPAIR >

[WITHOUT 7 INCH DISPLAY]

C

D

E

F

G

H

J

K

L

M

A

B

VTL

N

O

P

REAR VENTILATOR DUCT 1 : Exploded View

INFOID:0000000003465087

REAR VENTILATOR DUCT 1 : Removal and Installation

INFOID:0000000003457791

REMOVAL

1.

Remove the rear ventilator duct 2. Refer to 

VTL-56, "REAR VENTILATOR DUCT 2 : Exploded View"

. 

2.

Remove the rear ventilator duct 1 (1). 

INSTALLATION

Install in the reverse order of removal.

1.

Heater & cooling unit assembly

2.

Rear ventilator duct 4 (center pillar lower 
garnish left)

3.

Rear ventilator grille (left)

4.

Rear ventilator duct 3 (left)

5.

Rear ventilator duct 3 (right)

6.

Rear ventilator grille (right)

7.

Rear ventilator duct 4 (center pillar lower 
garnish right)

8.

Rear foot duct 1 (right)

9.

Rear ventilator duct 1

10.

Rear foot duct 1 (left)

11.

Rear foot duct 2 (left)

12. Rear foot duct 3 (left)

13.

Rear ventilator duct 2

14.

Rear foot duct 3 (right)

15. Rear foot duct 2 (right)

JPIIA0457ZZ

JPIIA0589ZZ

Revision: 2008 October

2009 Murano

VTL-56

< ON-VEHICLE REPAIR >

[WITHOUT 7 INCH DISPLAY]

DUCT AND GRILLE

REAR VENTILATOR DUCT 2

REAR VENTILATOR DUCT 2 : Exploded View

INFOID:0000000003465088

REAR VENTILATOR DUCT 2 : Removal and Installation

INFOID:0000000003457779

REMOVAL

1.

Remove the front seat assembly (left/right). Refer to 

SE-99, "Exploded View"

. 

2.

Remove the lower console finisher (left/right). Refer to 

IP-19, "Exploded View"

. 

3.

Remove the screws (A), nut (B), and clips (C), and then remove rear ventilator duct 2 (1). 

1.

Heater & cooling unit assembly

2.

Rear ventilator duct 4 (center pillar lower 
garnish left)

3.

Rear ventilator grille (left)

4.

Rear ventilator duct 3 (left)

5.

Rear ventilator duct 3 (right)

6.

Rear ventilator grille (right)

7.

Rear ventilator duct 4 (center pillar lower 
garnish right)

8.

Rear foot duct 1 (right)

9.

Rear ventilator duct 1

10.

Rear foot duct 1 (left)

11.

Rear foot duct 2 (left)

12. Rear foot duct 3 (left)

13.

Rear ventilator duct 2

14.

Rear foot duct 3 (right)

15. Rear foot duct 2 (right)

JPIIA0457ZZ

JPIIA0590ZZ

Revision: 2008 October

2009 Murano

DUCT AND GRILLE

VTL-57

< ON-VEHICLE REPAIR >

[WITHOUT 7 INCH DISPLAY]

C

D

E

F

G

H

J

K

L

M

A

B

VTL

N

O

P

INSTALLATION

Install in the reverse order of removal.

REAR VENTILATOR DUCT 3

REAR VENTILATOR DUCT 3 : Exploded View

INFOID:0000000003465089

REAR VENTILATOR DUCT 3 : Removal and Installation

INFOID:0000000003457783

REMOVAL

Driver side

1.

Remove the front seat assembly (left). Refer to 

SE-99, "Exploded View"

. 

2.

Pull up the driver side floor carpet. Refer to 

INT-23, "Exploded View"

. 

1.

Heater & cooling unit assembly

2.

Rear ventilator duct 4 (center pillar lower 
garnish left)

3.

Rear ventilator grille (left)

4.

Rear ventilator duct 3 (left)

5.

Rear ventilator duct 3 (right)

6.

Rear ventilator grille (right)

7.

Rear ventilator duct 4 (center pillar lower 
garnish right)

8.

Rear foot duct 1 (right)

9.

Rear ventilator duct 1

10.

Rear foot duct 1 (left)

11.

Rear foot duct 2 (left)

12. Rear foot duct 3 (left)

13.

Rear ventilator duct 2

14.

Rear foot duct 3 (right)

15. Rear foot duct 2 (right)

JPIIA0457ZZ

Revision: 2008 October

2009 Murano

VTL-58

< ON-VEHICLE REPAIR >

[WITHOUT 7 INCH DISPLAY]

DUCT AND GRILLE

3.

Remove the mounting screws (A), and then remove rear ventila-
tor duct 3 (left) (1). 

Passenger side

1.

Remove the front seat assembly (right). Refer to 

SE-99, "Exploded View"

. 

2.

Pull up the passenger side floor carpet. Refer to 

INT-23, "Exploded View"

. 

3.

Remove the mounting screws (A), and then remove rear ventila-
tor duct 3 (right) (1). 

INSTALLATION

Install in the reverse order of removal.

REAR VENTILATOR DUCT 4

JPIIA0591ZZ

JPIIA0592ZZ

Revision: 2008 October

2009 Murano

DUCT AND GRILLE

VTL-59

< ON-VEHICLE REPAIR >

[WITHOUT 7 INCH DISPLAY]

C

D

E

F

G

H

J

K

L

M

A

B

VTL

N

O

P

REAR VENTILATOR DUCT 4 : Exploded View

INFOID:0000000003465086

REAR VENTILATOR DUCT 4 : Removal and Installation

INFOID:0000000003072933

REMOVAL

1.

Remove the center pillar lower garnish (left/right). Refer to 

INT-19, "Exploded View"

. 

INSTALLATION

Install in the reverse order of removal.

REAR FOOT DUCT 1

1.

Heater & cooling unit assembly

2.

Rear ventilator duct 4 (center pillar lower 
garnish left)

3.

Rear ventilator grille (left)

4.

Rear ventilator duct 3 (left)

5.

Rear ventilator duct 3 (right)

6.

Rear ventilator grille (right)

7.

Rear ventilator duct 4 (center pillar lower 
garnish right)

8.

Rear foot duct 1 (right)

9.

Rear ventilator duct 1

10.

Rear foot duct 1 (left)

11.

Rear foot duct 2 (left)

12. Rear foot duct 3 (left)

13.

Rear ventilator duct 2

14.

Rear foot duct 3 (right)

15. Rear foot duct 2 (right)

JPIIA0457ZZ

Revision: 2008 October

2009 Murano