|
|
PWC-20 < COMPONENT DIAGNOSIS > POWER WINDOW MOTOR 3. CHECK FRONT POWER WINDOW MOTOR (DRIVER SIDE) Check front power window motor (driver side). PWC-20, "DRIVER SIDE : Component Inspection" . Is the inspection result normal? YES >> GO TO 4. NO >> Replace power window motor (driver side). Refer to GW-20, "Removal and Installation" . 4. CHECK INTERMITTENT INCIDENT GI-40, "Intermittent Incident" >> INSPECTION END DRIVER SIDE : Component Inspection INFOID:0000000004756740 1. CHECK FRONT POWER WINDOW MOTOR (DRIVER SIDE) 1. Turn ignition switch OFF. 2. Disconnect front power window motor (driver side) connector. 3. Check motor operate by connecting the battery voltage directly to front power window motor (driver side) Is the inspection result normal? YES >> INSPECTION END NO >> Replace front power window motor (driver side). Refer to GW-20, "Removal and Installation" . PASSENGER SIDE PASSENGER SIDE : Description INFOID:0000000004756741 Door glass moves UP/DOWN by receiving the signal from power window main switch or front power window PASSENGER SIDE : Component Function Check INFOID:0000000004756742 1. CHECK FRONT POWER WINDOW MOTOR (PASSENGER SIDE) OPERATION Check front power window motor (passenger side) operation with power window main switch or front power YES >> Power window motor (passenger side) is OK. NO >> Refer to PWC-20, "PASSENGER SIDE : Diagnosis Procedure" . PASSENGER SIDE : Diagnosis Procedure INFOID:0000000004756743 1. CHECK FRONT POWER WINDOW MOTOR (PASSENGER SIDE) INPUT SIGNAL 1. Turn ignition switch OFF. 2. Disconnect front power window motor (passenger side) connector. 3. Turn ignition switch ON. 4. Check voltage between front power window motor (passenger side) harness connector and ground. Front power window motor (driver side) Motor condition Connector Terminal (+) (–) D7 1 2 DOWN 2 1 UP Revision: 2008 October 2009 Murano |