|
|
PCS PUSH-BUTTON IGNITION SWITCH PCS-67 < COMPONENT DIAGNOSIS > [POWER DISTRIBUTION SYSTEM] C D E F G H I J K L B A O P N Is the inspection result normal? YES >> GO TO 4. NO >> Repair or replace harness. 4. CHECK PUSH-BUTTON IGNITION SWITCH PCS-67, "Component Inspection" . Is the inspection result normal? YES >> GO TO 5. NO >> Replace push-button ignition switch. Refer to PCS-130, "Removal and Installation" . 5. CHECK INTERMITTENT INCIDENT GI-40, "Intermittent Incident" . >> INSPECTION END Component Inspection INFOID:0000000003375899 1. CHECK PUSH-BUTTON IGNITION SWITCH 1. Turn ignition switch OFF. 2. Disconnect push-button ignition switch connector. 3. Check continuity between push-button ignition switch terminals. Is the inspection result normal? YES >> INSPECTION END NO >> Replace push-button ignition switch. Refer to PCS-130, "Removal and Installation" . Push-button ignition switch Ground Continuity Connector Terminal M101 1 Existed Push-button ignition switch Condition Continuity Terminal 1 4 Push-button ignition switch Pressed Existed Not pressed Not existed Revision: 2008 October 2009 Murano |