|
|
DLK-388 < FUNCTION DIAGNOSIS > [WITHOUT INTELLIGENT KEY SYSTEM] POWER DOOR LOCK SYSTEM FUNCTION DIAGNOSIS POWER DOOR LOCK SYSTEM System Diagram INFOID:0000000003497498 System Description INFOID:0000000003497499 DOOR LOCK FUNCTION • The door lock and unlock switch (driver side) is build into power window main switch. locked. • Interlocked with the unlocking operation of door lock and unlock switch, door lock actuators of all doors and are unlocked. Door Key Cylinder • With the door key inserted in the door key cylinder on driver side, turning it to “LOCK”, will lock door lock actuator of all doors. • With the door key inserted in the door key cylinder on driver side, turning it to “UNLOCK” once unlocks the driver side door lock actuator; turning it to “UNLOCK” again within 60 seconds after the first unlock operation Selective unlock operation mode can be changed using “DOOR LOCK-UNLOCK SET” mode in “WORK SUP- DLK-400, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK)" AUTOMATIC DOOR LOCK/UNLOCK FUNCTION (LOCK OPERATION) The interlock door lock function is the function that locks all doors linked with the vehicle speed or shift posi- Vehicle Speed Sensing Auto Door Lock*1 All doors are locked when the vehicle speed reaches 15 miles or more. P Range Interlock Door Lock All doors are locked when shifting the selector lever from the P position to any position other than P. Setting change of Automatic Door Lock/Unlock Function The lock operation setting of the automatic door lock/unlock function can be changed. With CONSULT-III The ON/OFF switching of the automatic door lock function and the type selection of the automatic door lock/ JMKIA1991GB Revision: 2008 October 2009 Murano |