Nissan Murano Z51 (2008 year). Manual - part 110

 

  Index      Manuals     Nissan Murano Z51 (2008 year) - Service and Repair Manual

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

Content      ..     108      109      110      111     ..

 

 

Nissan Murano Z51 (2008 year). Manual - part 110

 

 

DLK-292

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

P POSITION WARNING DOES NOT OPERATE

7.

CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-40, "Intermittent Incident"

.

NO

>> GO TO 1.

Revision: 2008 October

2009 Murano

ACC WARNING DOES NOT OPERATE

DLK-293

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

ACC WARNING DOES NOT OPERATE

Description

INFOID:0000000003318181

NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to 

DLK-14, "Work

Flow"

.

• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm

the list above twice in order to ensure proper operation. Refer to 

DLK-41, "WARNING FUNCTION : System

Description"

.

• Door lock function is normal.

Diagnosis Procedure

INFOID:0000000003318182

1.

CHECK POWER POSITION

Check if ignition switch position is changing or not.

Does ignition switch position change?

YES

>> GO TO 2.

NO

>> Check DTC for BCM. Refer to 

DLK-255, "DTC Index"

.

2.

CHECK BUZZER (COMBINATION METER)

Check buzzer (combination meter).
Refer to 

DLK-144, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK COMBINATION METER DISPLAY FUNCTION

Check combination meter display function.
Refer to 

DLK-143, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-40, "Intermittent Incident"

.

NO

>> GO TO 1.

Revision: 2008 October

2009 Murano

DLK-294

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

TAKE AWAY WARNING DOES NOT OPERATE

TAKE AWAY WARNING DOES NOT OPERATE

DOOR IS OPEN

DOOR IS OPEN : Description

INFOID:0000000003318185

NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to 

DLK-14, "Work

Flow"

.

• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm

the list above twice in order to ensure proper operation. Refer to 

DLK-41, "WARNING FUNCTION : System

Description"

.

• Door lock function is normal.

DOOR IS OPEN : Diagnosis Procedure

INFOID:0000000003318186

1.

CHECK POWER POSITION

Check if ignition switch position is changing or not.

Does ignition switch position change?

YES

>> GO TO 2.

NO

>> Check DTC for BCM. Refer to 

DLK-255, "DTC Index"

.

2.

CHECK BUZZER (COMBINATION METER)

Check buzzer (combination meter).
Refer to 

DLK-144, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK COMBINATION METER DISPLAY

Check combination meter display.
Refer to 

DLK-143, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK DOOR SWITCH

Check door switch (driver side).
Refer to 

DLK-103, "WITH AUTOMATIC BACK DOOR : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CHECK INTELLIGENT KEY WARNING BUZZER

Check Intelligent Key warning buzzer.
Refer to 

DLK-133, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Repair or replace the malfunctioning parts.

6.

CHECK INSIDE KEY ANTENNA

Check inside key antenna.
Refer to 

DLK-95, "DTC Logic"

 (instrument center).

Refer to 

DLK-97, "DTC Logic"

 (console).

Refer to 

DLK-99, "DTC Logic"

 (luggage room).

Is the inspection result normal?

YES

>> GO TO 7.

NO

>> Repair or replace the malfunctioning parts.

Revision: 2008 October

2009 Murano

TAKE AWAY WARNING DOES NOT OPERATE

DLK-295

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

7.

CHECK KEY SLOT ILLUMINATION

Check key slot illumination.
Refer to 

DLK-139, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 8.

NO

>> Repair or replace the malfunctioning parts.

8.

CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-40, "Intermittent Incident"

.

NO

>> GO TO 1.

ANY DOOR OPEN TO ALL DOORS CLOSED

ANY DOOR OPEN TO ALL DOORS CLOSED : Description

INFOID:0000000003318191

NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to 

DLK-14, "Work

Flow"

.

• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm

the list above twice in order to ensure proper operation. Refer to 

DLK-41, "WARNING FUNCTION : System

Description"

.

• Door lock function is normal.

ANY DOOR OPEN TO ALL DOORS CLOSED : Diagnosis Procedure

INFOID:0000000003318192

1.

CHECK DOOR SWITCH

Check door switch (driver side).
Refer to 

DLK-103, "WITH AUTOMATIC BACK DOOR : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK COMBINATION METER DISPLAY

Check combination meter display.
Refer to 

DLK-143, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK INSIDE KEY ANTENNA

Check inside key antenna.
Refer to 

DLK-95, "DTC Logic"

 (instrument center).

Refer to 

DLK-97, "DTC Logic"

 (console).

Refer to 

DLK-99, "DTC Logic"

 (luggage room).

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-40, "Intermittent Incident"

.

NO

>> GO TO 1.

PUSH-BUTTON IGNITION SWITCH OPERATION

Revision: 2008 October

2009 Murano

DLK-296

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

TAKE AWAY WARNING DOES NOT OPERATE

PUSH-BUTTON IGNITION SWITCH OPERATION : Description

INFOID:0000000003318187

NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to 

DLK-14, "Work

Flow"

.

• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm

the list above twice in order to ensure proper operation. Refer to 

DLK-41, "WARNING FUNCTION : System

Description"

.

• Door lock function is normal.

PUSH-BUTTON IGNITION SWITCH OPERATION : Diagnosis Procedure

INFOID:0000000003318188

1.

CHECK POWER POSITION

Check if ignition switch position is changing or not.

Does ignition switch position change?

YES

>> GO TO 2.

NO

>> Check DTC for BCM. Refer to 

DLK-255, "DTC Index"

.

2.

CHECK PUSH-BUTTON IGNITION SWITCH

Check push-button ignition switch.
Refer to 

PCS-66, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK BUZZER (COMBINATION METER)

Check buzzer (combination meter).
Refer to 

DLK-144, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK COMBINATION METER DISPLAY

Check combination meter display.
Refer to 

DLK-143, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CHECK INSIDE KEY ANTENNA

Check inside key antenna.
Refer to 

DLK-95, "DTC Logic"

 (instrument center).

Refer to 

DLK-97, "DTC Logic"

 (console).

Refer to 

DLK-99, "DTC Logic"

 (luggage room).

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Repair or replace the malfunctioning parts.

6.

CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-40, "Intermittent Incident"

.

NO

>> GO TO 1.

TAKE AWAY THROUGH WINDOW

TAKE AWAY THROUGH WINDOW : Description

INFOID:0000000003318195

NOTE:

Revision: 2008 October

2009 Murano

TAKE AWAY WARNING DOES NOT OPERATE

DLK-297

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to 

DLK-14, "Work

Flow"

.

• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm

the list above twice in order to ensure proper operation. Refer to 

DLK-41, "WARNING FUNCTION : System

Description"

.

• Door lock function is normal.

TAKE AWAY THROUGH WINDOW : Diagnosis Procedure

INFOID:0000000003318196

1.

CHECK POWER POSITION

Check if ignition switch position is changing or not.
Does ignition switch position change?

YES

>> GO TO 2.

NO

>> Check DTC for BCM. Refer to 

DLK-255, "DTC Index"

.

2.

CHECK “TAKE OUT FROM WIN WARN” SETTING IN “WORK SUPPORT”

Check “TAKE OUT FROM WIN WARN” setting in “WORK SUPPORT”.
Refer to 

DLK-61, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Set “TAKE OUT FROM WIN WARN” setting in “WORK SUPPORT”.

3.

CHECK COMBINATION METER DISPLAY

Check combination meter display.
Refer to 

DLK-143, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK INSIDE KEY ANTENNA

Check inside key antenna.
Refer to 

DLK-95, "DTC Logic"

 (instrument center).

Refer to 

DLK-97, "DTC Logic"

 (console).

Refer to 

DLK-99, "DTC Logic"

 (luggage room).

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CHECK KEY SLOT ILLUMINATION

Check key slot illumination.
Refer to 

DLK-139, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Repair or replace the malfunctioning parts.

6.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-40, "Intermittent Incident"

.

NO

>> GO TO 1.

INTELLIGENT KEY IS REMOVED FROM KEY SLOT

INTELLIGENT KEY IS REMOVED FROM KEY SLOT : Description

INFOID:0000000003318199

NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to 

DLK-14, "Work

Flow"

.

Revision: 2008 October

2009 Murano

DLK-298

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

TAKE AWAY WARNING DOES NOT OPERATE

• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm

the list above twice in order to ensure proper operation. Refer to 

DLK-41, "WARNING FUNCTION : System

Description"

.

• Door lock function is normal.

INTELLIGENT KEY IS REMOVED FROM KEY SLOT : Diagnosis Procedure

INFOID:0000000003318200

1.

CHECK KEY SLOT

Check key slot.
Refer to 

DLK-137, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK COMBINATION METER DISPLAY

Check combination meter display.
Refer to 

DLK-143, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK INSIDE KEY ANTENNA

Check inside key antenna.
Refer to 

DLK-95, "DTC Logic"

 (instrument center).

Refer to 

DLK-97, "DTC Logic"

 (console).

Refer to 

DLK-99, "DTC Logic"

 (luggage room).

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK KEY SLOT ILLUMINATION

Check key slot illumination.
Refer to 

DLK-139, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-40, "Intermittent Incident"

.

NO

>> GO TO 1.

Revision: 2008 October

2009 Murano

INTELLIGENT KEY LOW BATTERY WARNING DOES NOT OPERATE

DLK-299

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

INTELLIGENT KEY LOW BATTERY WARNING DOES NOT OPERATE

Description

INFOID:0000000003318203

NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to 

DLK-14, "Work

Flow"

.

• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm

the list above twice in order to ensure proper operation. Refer to 

DLK-41, "WARNING FUNCTION : System

Description"

.

Diagnosis Procedure

INFOID:0000000003318204

1.

CHECK “LO- BATT OF KEY FOB WARN” SETTING IN “WORK SUPPORT”

Check “LO- BATT OF KEY FOB WARN” setting in “WORK SUPPORT”.
Refer to 

DLK-61, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Set “LO- BATT OF KEY FOB WARN” setting in “WORK SUPPORT”.

2.

CHECK INTELLIGENT KEY BATTERY

Check Intelligent Key battery.
Refer to 

DLK-135, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK COMBINATION METER DISPLAY

Check combination meter display.
Refer to 

DLK-143, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK INSIDE KEY ANTENNA

Check inside key antenna.
Refer to 

DLK-95, "DTC Logic"

 (instrument center).

Refer to 

DLK-97, "DTC Logic"

 (console).

Refer to 

DLK-99, "DTC Logic"

 (luggage room).

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CHECK KEY SLOT ILLUMINATION

Check key slot illumination.
Refer to 

DLK-139, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Repair or replace the malfunctioning parts.

6.

CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-40, "Intermittent Incident"

.

NO

>> GO TO 1.

Revision: 2008 October

2009 Murano

DLK-300

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

DOOR LOCK OPERATION WARNING DOES NOT OPERATE WITH DOOR RE-

QUEST SWITCH

DOOR LOCK OPERATION WARNING DOES NOT OPERATE WITH DOOR
REQUEST SWITCH

Description

INFOID:0000000003318205

NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to 

DLK-14, "Work

Flow"

.

• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm

the list above twice in order to ensure proper operation. Refer to 

DLK-41, "WARNING FUNCTION : System

Description"

.

Diagnosis Procedure

INFOID:0000000003318206

1.

CHECK DOOR LOCK FUNCTION

Check door lock function by door request switch.

Does door lock/unlock with door request switch?

YES

>> GO TO 2.

NO

>> • Go to 

DLK-283, "DRIVER SIDE : Description"

 (driver side).

• Go  to 

DLK-283, "PASSENGER SIDE : Description"

 (passenger side).

• Go  to 

DLK-284, "BACK DOOR : Description"

 (back door).

2.

CHECK DOOR SWITCH

Check door switch (driver side).
Refer to 

DLK-103, "WITH AUTOMATIC BACK DOOR : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK INTELLIGENT KEY WARNING BUZZER

Check Intelligent Key warning buzzer.
Refer to 

DLK-133, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK INSIDE KEY ANTENNA

Check inside key antenna.
Refer to 

DLK-95, "DTC Logic"

 (instrument center).

Refer to 

DLK-97, "DTC Logic"

 (console).

Refer to 

DLK-99, "DTC Logic"

 (luggage room).

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-40, "Intermittent Incident"

.

NO

>> GO TO 1.

Revision: 2008 October

2009 Murano

KEY ID WARNING DOES NOT OPERATE

DLK-301

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

KEY ID WARNING DOES NOT OPERATE

Description

INFOID:0000000003318209

NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to 

DLK-14, "Work

Flow"

.

• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm

the list above twice in order to ensure proper operation. Refer to 

DLK-41, "WARNING FUNCTION : System

Description"

.

Diagnosis Procedure

INFOID:0000000003318210

1.

CHECK INTELLIGENT KEY

Check Intelligent Key.
Refer to 

DLK-135, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK COMBINATION METER DISPLAY FUNCTION

Check combination meter display function.
Refer to 

DLK-143, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-40, "Intermittent Incident"

.

NO

>> GO TO 1.

Revision: 2008 October

2009 Murano

DLK-302

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

INTELLIGENT KEY LOW BATTERY WARNING DOES NOT OPERATE

INTELLIGENT KEY LOW BATTERY WARNING DOES NOT OPERATE

Description

INFOID:0000000003625929

NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to 

DLK-14, "Work

Flow"

.

• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm

the list above twice in order to ensure proper operation. Refer to 

DLK-41, "WARNING FUNCTION : System

Description"

.

Diagnosis Procedure

INFOID:0000000003625930

1.

CHECK INTELLIGENT KEY

Check Intelligent Key.
Refer to 

DLK-135, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK COMBINATION METER DISPLAY FUNCTION

Check combination meter display function.
Refer to 

DLK-143, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-40, "Intermittent Incident"

.

NO

>> GO TO 1.

Revision: 2008 October

2009 Murano

INTEGRATED HOMELINK TRANSMITTER DOES NOT OPERATE

DLK-303

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

INTEGRATED HOMELINK TRANSMITTER DOES NOT OPERATE

Description

INFOID:0000000003318219

NOTE:
Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to 

DLK-14, "Work Flow"

.

Diagnosis Procedure

INFOID:0000000003318220

1.

CHECK INTEGRATED HOMELINK TRANSMITTER

Check integrated homelink transmitter.
Refer to 

DLK-171, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-40, "Intermittent Incident"

.

NO

>> GO TO 1.

Revision: 2008 October

2009 Murano

DLK-304

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

AUTOMATIC BACK DOOR OPERATION DOES NOT OPERATE

AUTOMATIC BACK DOOR OPERATION DOES NOT OPERATE

ALL SWITCHES

ALL SWITCHES : Diagnosis Procedure

INFOID:0000000003465104

1.

CHECK POWER SUPPLY AND GROUND CIRCUIT

Check power supply and ground circuit.
Refer to 

DLK-101, "AUTOMATIC BACK DOOR CONTROL UNIT : Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK AUTOMATIC BACK DOOR CONTROL UNIT SPECIFICATION 

Check ground circuit.
Refer to 

DLK-170, "AUTOMATIC BACK DOOR CONTROL UNIT : Diagnosis Procedure"

. 

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CONFIRM THE OPERATION 

Confirm the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-40, "Intermittent Incident"

.

NO

>> GO TO 1.

AUTOMATIC BACK DOOR SWITCH

AUTOMATIC BACK DOOR SWITCH : Diagnosis Procedure

INFOID:0000000003465095

1.

CHECK AUTOMATIC BACK DOOR SWITCH

Check automatic back door switch.
Refer to 

DLK-151, "Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-40, "Intermittent Incident"

.

NO

>> GO TO 1.

AUTOMATIC BACK DOOR CLOSE SWITCH

AUTOMATIC BACK DOOR CLOSE SWITCH : Diagnosis Procedure

INFOID:0000000003465097

1.

CONFIRM THE OPERATION

1.

Turn ON automatic back door main switch.

2.

Confirm the operation.

Is the result normal?

YES

>> Automatic back door system is normal.

NO

>> GO TO 2.

2.

CHECK AUTOMATIC BACK DOOR CLOSE SWITCH

Check automatic back door close switch.
Refer to 

DLK-147, "Diagnosis Procedure"

.

Is the inspection result normal?

Revision: 2008 October

2009 Murano

AUTOMATIC BACK DOOR OPERATION DOES NOT OPERATE

DLK-305

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK AUTOMATIC BACK DOOR MAIN SWITCH

Check automatic back door main switch.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-40, "Intermittent Incident"

.

NO

>> GO TO 1.

INTELLIGENT KEY

INTELLIGENT KEY : Diagnosis Procedure

INFOID:0000000003465099

1.

CONFIRM THE OPERATION

1.

Turn ON automatic back door main switch.

2.

Confirm the operation.

Is the result normal?

YES

>> Automatic back door system is normal.

NO

>> GO TO 2.

2.

CHECK DOOR LOCK SYSTEM

Check Intelligent Key system.
Refer to 

DLK-277, "Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK AUTOMATIC BACK DOOR MAIN SWITCH

Check automatic back door main switch.
Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-40, "Intermittent Incident"

.

NO

>> GO TO 1.

BACK DOOR OPENER SWITCH

BACK DOOR OPENER SWITCH : Diagnosis Procedure

INFOID:0000000003465101

1.

CONFIRM THE OPERATION

1.

Turn ON automatic back door main switch.

2.

Confirm the operation.

Is the result normal?

YES

>> Automatic back door system is normal.

NO

>> GO TO 2.

2.

CHECK DOOR LOCK SYSTEM

Check Intelligent Key system.

Revision: 2008 October

2009 Murano

DLK-306

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

AUTOMATIC BACK DOOR OPERATION DOES NOT OPERATE

Refer to 

DLK-277, "Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-40, "Intermittent Incident"

.

NO

>> GO TO 1.

CLOSURE FUNCTION

CLOSURE FUNCTION : Diagnosis Procedure

INFOID:0000000003609289

1.

CHECK HALF LATCH SWITCH

Check half latch switch.
Refer to 

DLK-157, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK CLOSURE MOTOR

Check closure door motor.
Refer to 

DLK-157, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-40, "Intermittent Incident"

.

NO

>> GO TO 1.

BACK DOOR OPEN/CLOSE FUNCTION

BACK DOOR OPEN/CLOSE FUNCTION : Diagnosis Procedure

INFOID:0000000003609293

1.

CHECK POWER SUPPLY AND GROUND CIRCUIT

Check power supply and ground circuit.
Refer to 

DLK-101, "BCM (BODY CONTROL MODULE) : Diagnosis Procedure"

 (BCM).

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK TOUCH SENSOR

Check touch sensor LH/RH.
Refer to 

DLK-160, "LH : Component Function Check"

 (LH). 

Refer to 

DLK-159, "RH : Component Function Check"

 (RH). 

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK CLUTCH

Check clutch.
Refer to 

DLK-165, "Diagnosis Procedure"

.

Is the inspection result normal?

Revision: 2008 October

2009 Murano

AUTOMATIC BACK DOOR OPERATION DOES NOT OPERATE

DLK-307

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK AUTOMATIC BACK DOOR MOTOR

Check automatic back door motor.
Refer to 

DLK-166, "Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-40, "Intermittent Incident"

.

NO

>> GO TO 1.

Revision: 2008 October

2009 Murano

 

 

 

 

 

 

 

Content      ..     108      109      110      111     ..