Nissan Juke (2014 year). Service Repair Manual - part 54

DLK-89, "Diagnosis Procedure"

Diagnosis Procedure

INFOID:0000000009753997

CHECK REMOTE KEYLESS ENTRY RECEIVER POWER SUPPLY

Turn ignition switch OFF.

Disconnect remote keyless entry receiver connector.

Check voltage between remote keyless entry receiver harness connector and ground.

Is the inspection result normal?

YES

>> GO TO 3.

>> GO TO 2.

DETECT MALFUNCTIONING PART

Check the following.
• 10 A fuse (No. 7)
• Harness for open or short between remote keyless entry receiver and battery
Is the inspection result normal?

YES

>> GO TO 6.

>> Repair or replace the malfunctioning parts.

CHECK REMOTE KEYLESS ENTRY RECEIVER GROUND CIRCUIT

Disconnect BCM connector.

Check continuity between BCM harness connector and remote keyless entry receiver harness connector.

Check continuity between BCM harness connector and ground.

Is the inspection result normal?

YES

>> GO TO 4.

>> Repair or replace harness.

Monitor item

Condition

RKE OPE COUN1

Checks whether value changes when operating Intelligent Key

(+)

(–)

Voltage

Remote keyless entry receiver

Connector

Terminal

M75

Ground

Battery voltage

BCM

Remote keyless entry receiver

Continuity

Connector

Terminal

Connector

Terminal

M68

M75

Existed

BCM

Ground

Continuity

Connector

Terminal

M68

Existed

Revision: 2013 October

2014 JUKE

DLK-90

< DTC/CIRCUIT DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

REMOTE KEYLESS ENTRY RECEIVER

CHECK REMOTE KEYLESS ENTRY RECEIVER OUTPUT SIGNAL

Reconnect BCM connector and remote keyless entry receiver connector.

Check signal between remote keyless entry receiver harness connector and ground using oscilloscope.

Is the inspection result normal?

YES

>> GO TO 5.

>> Replace remote keyless entry receiver.

CHECK REMOTE KEYLESS ENTRY RECEIVER CIRCUIT

Disconnect BCM connector and remote keyless entry receiver connector.

Check continuity between BCM harness connector and remote keyless entry receiver harness connector.

Check continuity between BCM harness connector and ground.

Is the inspection result normal?

YES

>> Replace BCM. Refer to

>> Repair or replace harness.

CHECK INTERMITTENT INCIDENT

>> INSPECTION END

(+)

(–)

Condition

Signal

(Reference value)

Remote keyless entry receiver

Connector

Terminal

M75

Ground

Waiting

12 V

Press the Intelligent
Key lock or unlock
button

JMMIA0572GB

BCM

Remote keyless entry receiver

Continuity

Connector

Terminal

Connector

Terminal

M68

M75

Existed

BCM

Ground

Continuity

Connector

Terminal

M68

Not existed

Revision: 2013 October

2014 JUKE

SHIFT P WARNING LAMP

DLK-91

< DTC/CIRCUIT DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

DLK

SHIFT P WARNING LAMP

Component Function Check

INFOID:0000000009753998

CHECK FUNCTION

Select “INTELLIGENT KEY” of “BCM” using CONSULT.

Select “LCD” in “ACTIVE TEST” mode.

Check that the function operates normally according to the following conditions.

Is the inspection result normal?

YES

>> Shift P warning lamp is OK.

DLK-91, "Diagnosis Procedure"

Diagnosis Procedure

INFOID:0000000009753999

CHECK SHIFT P WARNING LAMP

MWI-20, "On Board Diagnosis Function"

Is the inspection result normal?

YES

>> GO TO 2.

>> Repair or replace the malfunctioning parts.

CHECK INTERMITTENT INCIDENT

>> INSPECTION END

Monitor item

Status

LCD

SFT P

Shift P warning lamp

Turns ON

Revision: 2013 October

2014 JUKE

DLK-92

< DTC/CIRCUIT DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

UNLOCK SENSOR

UNLOCK SENSOR

Component Function Check

INFOID:0000000009754000

CHECK FUNCTION

Select “INTELLIGENT KEY” of “BCM” using CONSULT.

Select “UNLK SEN -DR” in “DATA MONITOR” mode.

Check that the function operates normally according to the following conditions.

Is the inspection result normal?

YES

>> Unlock sensor is OK.

DLK-92, "Diagnosis Procedure"

Diagnosis Procedure

INFOID:0000000009754001

CHECK BCM OUTPUT SIGNAL

Turn ignition switch OFF.

Disconnect front door lock assembly (driver side) connector.

Check signal between front door lock assembly (driver side) harness connector and ground using oscillo-
scope.

Is the inspection result normal?

YES

>> GO TO 3.

>> GO TO 2.

CHECK UNLOCK SENSOR CIRCUIT

Disconnect BCM connector.

Check continuity between BCM harness connector and front door lock assembly (driver side) harness
connector.

Check continuity between BCM harness connector and ground.

Is the inspection result normal?

YES

>> Replace BCM. Refer to

Monitor item

Condition

Status

UNLK SEN -DR

Driver side door

Lock

OFF

Unlock

(+)

(–)

Signal

(Reference value)

Front door lock assembly (driver side)

Connector

Terminal

D38

Ground

PKIB4960J

BCM

Front door lock assembly (driver side)

Continuity

Connector

Terminal

Connector

Terminal

M68

D38

Existed

BCM

Ground

Continuity

Connector

Terminal

M68

Not existed

Revision: 2013 October

2014 JUKE

UNLOCK SENSOR

DLK-93

< DTC/CIRCUIT DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

DLK

>> Repair or replace harness.

CHECK UNLOCK SENSOR GROUND CIRCUIT

Check continuity between front door lock assembly (driver side) harness connector and ground.

Is the inspection result normal?

YES

>> GO TO 4.

>> Repair or replace harness.

CHECK UNLOCK SENSOR

DLK-93, "Component Inspection"

Is the inspection result normal?

YES

>> GO TO 5.

>> Replace front door lock assembly (driver side).

CHECK INTERMITTENT INCIDENT

DLK-77, "Component Function Check"

>> INSPECTION END

Component Inspection

INFOID:0000000009754002

CHECK UNLOCK SENSOR

Turn ignition switch OFF.

Disconnect front door lock assembly (driver side) connector.

Check continuity between front door lock assembly (driver side) terminals.

Is the inspection result normal?

YES

>> INSPECTION END

>> Replace front lock assembly (driver side).

Front door lock assembly (driver side)

Ground

Continuity

Connector

Terminal

D38

Existed

Front door lock assembly (driver side)

Condition

Continuity

Terminal

Driver side door

Unlock

Existed

Lock

Not existed

Revision: 2013 October

2014 JUKE

DLK-94

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

DOOR DOES NOT LOCK/UNLOCK WITH DOOR LOCK AND UNLOCK SWITCH

SYMPTOM DIAGNOSIS

DOOR DOES NOT LOCK/UNLOCK WITH DOOR LOCK AND UNLOCK
SWITCH

ALL DOOR

ALL DOOR : Description

INFOID:0000000009754003

All doors do not lock/unlock using door lock and unlock switch.

ALL DOOR : Diagnosis Procedure

INFOID:0000000009754004

CHECK DOOR LOCK AND UNLOCK SWITCH

Check door lock and unlock switch.
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Repair or replace the malfunctioning parts.

CHECK DOOR LOCK ACTUATOR

Check front door lock assembly (driver side).
Refer to

DLK-72, "DRIVER SIDE : Component Function Check"

Is the inspection result normal?

YES

>> GO TO 3.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-72, "DRIVER SIDE : Component Function Check"

DRIVER SIDE

DRIVER SIDE : Description

INFOID:0000000009754005

Driver side door does not lock/unlock using door lock and unlock switch.

DRIVER SIDE : Diagnosis Procedure

INFOID:0000000009754006

CHECK DOOR LOCK ACTUATOR

Check front door lock assembly (driver side).
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-73, "PASSENGER SIDE : Component Function Check"

PASSENGER SIDE

Revision: 2013 October

2014 JUKE

DOOR DOES NOT LOCK/UNLOCK WITH DOOR LOCK AND UNLOCK SWITCH

DLK-95

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

DLK

PASSENGER SIDE : Description

INFOID:0000000009754007

Passenger side door does not lock/unlock using door lock and unlock switch.

PASSENGER SIDE : Diagnosis Procedure

INFOID:0000000009754008

CHECK DOOR LOCK ACTUATOR

Check front door lock assembly (passenger side).
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-74, "REAR LH : Component Function Check"

REAR LH

REAR LH : Description

INFOID:0000000009754009

Rear LH side door does not lock/unlock using door lock and unlock switch.

REAR LH : Diagnosis Procedure

INFOID:0000000009754010

CHECK DOOR LOCK ACTUATOR

Check rear door lock assembly LH.
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-75, "REAR RH : Component Function Check"

REAR RH

REAR RH : Description

INFOID:0000000009754011

Rear RH side door does not lock/unlock using door lock and unlock switch.

REAR RH : Diagnosis Procedure

INFOID:0000000009754012

CHECK DOOR LOCK ACTUATOR

Check rear door lock assembly RH.
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Revision: 2013 October

2014 JUKE

DOOR DOES NOT LOCK/UNLOCK WITH DOOR REQUEST SWITCH

DLK-97

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

DLK

DOOR DOES NOT LOCK/UNLOCK WITH DOOR REQUEST SWITCH

ALL DOOR REQUEST SWITCHES

ALL DOOR REQUEST SWITCHES : Description

INFOID:0000000009754013

All doors do not lock/unlock using all door request switches.

ALL DOOR REQUEST SWITCHES : Diagnosis Procedure

INFOID:0000000009754014

CHECK REMOTE KEYLESS ENTRY FUNCTION

Check remote keyless entry function.

Does door lock/unlock with Intelligent Key button?

YES

>> GO TO 2.

DLK-21, "REMOTE KEYLESS ENTRY FUNCTION : System Description"

CHECK “LOCK/UNLOCK BY I-KEY” SETTING IN “WORK SUPPORT”

Select “INTELLIGENT KEY” of “BCM” using CONSULT.

Select “LOCK/UNLOCK BY I-KEY” in “WORK SUPPORT” mode.

Check “LOCK/UNLOCK BY I-KEY” in “WORK SUPPORT”.
Refer to

DLK-31, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"

Is the inspection result normal?

YES

>> GO TO 3.

>> Set “LOCK/UNLOCK BY I-KEY” in “WORK SUPPORT”.

CHECK DOOR SWITCH

Check door switch.
Refer to

DLK-81, "Component Function Check"

Is the inspection result normal?

YES

>> GO TO 4.

>> Repair or replace the malfunctioning parts.

CHECK INSIDE KEY ANTENNA

Check inside key antenna.
• Instrument center: Refer to

DLK-51, "DTC Logic"

• Console: Refer to

DLK-53, "DTC Logic"

• Luggage room: Refer to

DLK-55, "DTC Logic"

Is the inspection result normal?

YES

>> GO TO 5.

>> Repair or replace the malfunctioning parts.

CHECK OUTSIDE KEY ANTENNA

Check outside key antenna.
• Driver side: Refer to

DLK-59, "DTC Logic"

• Passenger side: Refer to

DLK-57, "DTC Logic"

• Rear bumper: Refer to

DLK-61, "DTC Logic"

Is the inspection result normal?

YES

>> GO TO 6.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-79, "Component Function Check"

DRIVER SIDE DOOR REQUEST SWITCH

Revision: 2013 October

2014 JUKE

DLK-98

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

DOOR DOES NOT LOCK/UNLOCK WITH DOOR REQUEST SWITCH

DRIVER SIDE DOOR REQUEST SWITCH : Description

INFOID:0000000009754015

All doors do not lock/unlock using driver side door request switch.

DRIVER SIDE DOOR REQUEST SWITCH : Diagnosis Procedure

INFOID:0000000009754016

CHECK DRIVER SIDE DOOR REQUEST SWITCH

Check driver side door request switch.
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Repair or replace the malfunctioning parts.

CHECK OUTSIDE KEY ANTENNA

Check outside key antenna (driver side).
Refer to

DLK-59, "DTC Logic"

Is the inspection result normal?

YES

>> GO TO 3.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-79, "Component Function Check"

PASSENGER SIDE DOOR REQUEST SWITCH

PASSENGER SIDE DOOR REQUEST SWITCH : Description

INFOID:0000000009754017

All doors do not lock/unlock using passenger side door request switch.

PASSENGER SIDE DOOR REQUEST SWITCH : Diagnosis Procedure

INFOID:0000000009754018

CHECK PASSENGER SIDE DOOR REQUEST SWITCH

Check passenger side door request switch.
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Repair or replace the malfunctioning parts.

CHECK OUTSIDE KEY ANTENNA

Check outside key antenna (passenger side).
Refer to

DLK-57, "DTC Logic"

Is the inspection result normal?

YES

>> GO TO 3.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-67, "Component Function Check"

BACK DOOR REQUEST SWITCH

Revision: 2013 October

2014 JUKE

DOOR DOES NOT LOCK/UNLOCK WITH DOOR REQUEST SWITCH

DLK-99

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

DLK

BACK DOOR REQUEST SWITCH : Description

INFOID:0000000009754019

All doors do not lock/unlock using back door request switch.

BACK DOOR REQUEST SWITCH : Diagnosis Procedure

INFOID:0000000009754020

CHECK BACK DOOR REQUEST SWITCH

Check back door request switch.
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Repair or replace the malfunctioning parts.

CHECK OUTSIDE KEY ANTENNA

Check outside key antenna (rear bumper).
Refer to

DLK-61, "DTC Logic"

Is the inspection result normal?

YES

>> GO TO 3.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

Revision: 2013 October

2014 JUKE

DLK-100

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

DOOR DOES NOT LOCK/UNLOCK WITH DOOR KEY CYLINDER OPERATION

DOOR DOES NOT LOCK/UNLOCK WITH DOOR KEY CYLINDER OPERA-
TION

Diagnosis Procedure

INFOID:0000000009754021

CHECK POWER DOOR LOCK OPERATION

Check power door lock operation.
Does door lock/unlock with door lock and unlock switch?

YES

>> GO TO 2.

DLK-77, "Component Function Check"

CHECK DOOR KEY CYLINDER SWITCH

Check door key cylinder switch.
Refer to

DLK-70, "Component Function Check"

Is the inspection result normal?

YES

>> GO TO 3.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-85, "Component Inspection"

Revision: 2013 October

2014 JUKE

DOOR DOES NOT LOCK/UNLOCK WITH INTELLIGENT KEY

DLK-101

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

DLK

DOOR DOES NOT LOCK/UNLOCK WITH INTELLIGENT KEY

Diagnosis Procedure

INFOID:0000000009754022

CHECK INTELLIGENT KEY

For Intelligent Key that cannot be used for door lock and unlock, check that the Intelligent Key belongs to the
vehicle to be checked.

Does the Intelligent Key belong to the vehicle to checked?

YES

>> GO TO 2.

>> Check Intelligent Key button operation with registered Intelligent Key belonging to the vehicle.

CHECK INTELLIGENT KEY LOW BATTERY WARNING

Check that the Intelligent Key low battery warning is operated.

Is the Intelligent Key low battery warning operated?

YES

>> GO TO 6.

NO-1

>> With another registered Intelligent Key: GO TO 3.

NO-2

>> Without another registered Intelligent Key: GO TO 4.

CHECK INTELLIGENT KEY BUTTON OPERATION

Check that door lock and unlock can be performed by operating the buttons of another registered Intelligent
Key.

Can door lock and unlock be performed with another registered Intelligent Key?

YES

>> GO TO 4.

>> GO TO 7.

CHECK ENGINE START

While depressing the brake pedal, contact the backside of the Intelligent Key that cannot be used to perform
door lock and unlock operation to the push-button ignition switch. Operate the push-button ignition switch, and
check that the vehicle is in START status.
Is the vehicle in START status?

YES

>> GO TO 6.

>> GO TO 5.

CHECK INTELLIGENT KEY

Check the inside of the Intelligent Key for rust or corrosion by water. Simultaneously check the internal circuits
for damage.
Is the vehicle in START status?

YES

>> GO TO 6.

>> Replace Intelligent Key.

CHECK INTELLIGENT KEY BATTERY

Check the Intelligent Key battery.
Refer to

Is the inspection result normal?

YES

>> GO TO 7.

>> Replace Intelligent Key battery.

CHECK POWER DOOR LOCK OPERATION

Check door lock/unlock using door lock and unlock switch.

Does door lock/unlock using door lock and unlock switch?

YES

>> GO TO 8.

DLK-94, "ALL DOOR : Diagnosis Procedure"

CHECK REMOTE KEYLESS ENTRY RECEIVER

Check remote keyless entry receiver.
Refer to

DLK-89, "Component Function Check"

Revision: 2013 October

2014 JUKE

DLK-102

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

DOOR DOES NOT LOCK/UNLOCK WITH INTELLIGENT KEY

Is the inspection result normal?

YES

>> GO TO 9.

>> Repair or replace the malfunctioning parts.

CHECK DOOR SWITCH

Check door switch.
Refer to

DLK-81, "Component Function Check"

Is the inspection result normal?

YES

>> GO TO 10.

>> Repair or replace the malfunctioning parts.

10.

REPLACE INTELLIGENT KEY

Replace Intelligent Key.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Replace BCM. Refer to

Revision: 2013 October

2014 JUKE

IGNITION POSITION WARNING FUNCTION DOES NOT OPERATE

DLK-103

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

DLK

IGNITION POSITION WARNING FUNCTION DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000009754023

CHECK DTC WITH BCM

Check that DTC is not detected with BCM.
Is the inspection result normal?

YES

>> GO TO 2.

BCS-59, "DTC Index"

CHECK POWER DOOR LOCK OPERATION

Check power door lock operation.
Does door lock/unlock with driver side door lock knob and door key cylinder?

YES

>> GO TO 3.

DLK-14, "System Description"

CHECK DOOR SWITCH

Check door switch.
Refer to

DLK-81, "Component Function Check"

Is the inspection result normal?

YES

>> GO TO 4.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-29, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)"

Revision: 2013 October

2014 JUKE

DLK-104

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

SELECTIVE UNLOCK FUNCTION DOES NOT OPERATE

SELECTIVE UNLOCK FUNCTION DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000009754024

CHECK “DOOR LOCK–UNLOCK SET” SETTING IN “WORK SUPPORT”

Select “DOOR LOCK” of “BCM” using CONSULT.

Select “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT” mode.

Check “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT”
Refer to

Is the inspection result normal?

YES

>> GO TO 2

>> Set “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT”.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to