Nissan Juke (2014 year). Service Repair Manual

BCS-38

< ECU DIAGNOSIS INFORMATION >

[WITH INTELLIGENT KEY SYSTEM]

BCM

OPTI SEN (FILT)

Bright outside of the vehicle (Lighting switch AUTO)

Close to 5 V

Dark outside of the vehicle (Lighting switch AUTO)

Close to 1.50 V

OPTICAL SENSOR

NOTE:
The item is indicated, but not monitored.

Off

RAIN SENSOR

NOTE:
The item is indicated, but not monitored.

Off

REQ SW -DR

Driver door request switch is not pressed

Off

Driver door request switch is pressed

REQ SW -AS

Passenger door request switch is not pressed

Off

Passenger door request switch is pressed

REQ SW -RR

NOTE:
The item is indicated, but not monitored.

Off

REQ SW -RL

NOTE:
The item is indicated, but not monitored.

Off

REQ SW -BD/TR

Back door request switch is not pressed

Off

Back door request switch is pressed

PUSH SW

Push-button ignition switch (push switch) is not pressed

Off

Push-button ignition switch (push switch) is pressed

CLUCH SW

The clutch pedal is not depressed.

Off

The clutch pedal is depressed

BRAKE SW 1

The brake pedal is not depressed

Off

The brake pedal is depressed

BRAKE SW 2

The brake pedal is depressed when No. 38 fuse is blown

Off

The brake pedal is not depressed when No. 38 fuse is blown, or No. 38
fuse is normal

DETE/CANCL SW
NOTE:
For M/T models this item is not
used.

Selector lever in P position

Release selector button

Off

Push selector button

Selector lever in any position other than P

SFT PN/N SW

• Selector lever in any position other than P and N (CVT models)
• Control lever in any position other than neutral (M/T models)

Off

• Selector lever in P or N position (CVT models)
• Control lever in neutral position (M/T models)

S/L -LOCK

NOTE:
The item is indicated, but not monitored.

Off

S/L -UNLOCK

NOTE:
The item is indicated, but not monitored.

Off

S/L RELAY-F/B

NOTE:
The item is indicated, but not monitored.

Off

UNLK SEN -DR

Driver door is locked

Off

Driver door is unlocked

PUSH SW -IPDM

Push-button ignition switch (push-switch) is not pressed

Off

Push-button ignition switch (push-switch) is pressed

IGN RLY1 -F/B

Ignition switch in OFF or ACC position

Off

Ignition switch in ON position

DETE SW -IPDM
NOTE:
For M/T models this item is not
used.

Selector lever in any position other than P

Off

Selector lever in P position

Push selector button

Release selector button

Monitor Item

Condition

Value/Status

Revision: 2013 October

2014 JUKE

BCS

BCM

BCS-39

< ECU DIAGNOSIS INFORMATION >

[WITH INTELLIGENT KEY SYSTEM]

SFT PN -IPDM
NOTE:
For M/T models this item is not
used.

Selector lever in any position other than P and N

Off

Selector lever in P or N position

SFT P -MET
NOTE:
For M/T models this item is not
used.

Selector lever in any position other than P

Off

Selector lever in P position

SFT N -MET
NOTE:
For M/T models this item is not
used.

Selector lever in any position other than N

Off

Selector lever in N position

ENGINE STATE

Engine stopped

Stop

While the engine stalls

Stall

At engine cranking

Crank

Engine running

Run

S/L LOCK-IPDM

NOTE:
The item is indicated, but not monitored.

Off

S/L UNLK-IPDM

NOTE:
The item is indicated, but not monitored.

Off

S/L RELAY-REQ

NOTE:
The item is indicated, but not monitored.

Off

VEH SPEED 1

While driving

Equivalent to speed-

ometer reading

VEH SPEED 2

While driving

Equivalent to speed-

ometer reading

DOOR STAT-DR

Driver door is locked

LOCK

Wait with selective unlock operation (60 seconds)

READY

Driver door is unlocked

UNLOCK

DOOR STAT-AS

Passenger door is locked

LOCK

Wait with selective unlock operation (60 seconds)

READY

Passenger door is unlocked

UNLOCK

ID OK FLAG

Driver side door is open after ignition switch is turned OFF
(Shift position is in the P position)

Reset

Ignition switch ON

Set

PRMT ENG STRT

The engine start is prohibited

Reset

The engine start is permitted

Set

PRMT RKE STRT

NOTE:
The item is indicated, but not monitored.

Reset

RKE OPE COUN1

During the operation of the key

Operation frequency

of the key

RKE OPE COUN2

NOTE:
The item is indicated, but not monitored.

—

CONFRM ID ALL

The key ID that the key slot receives is not recognized by any key ID reg-
istered to BCM.

Yet

The key ID that the key slot receives is recognized by any key ID regis-
tered to BCM.

Done

CONFIRM ID4

The key ID that the key slot receives is not recognized by the fourth key ID
registered to BCM.

Yet

The key ID that the key slot receives is recognized by the fourth key ID reg-
istered to BCM.

Done

Monitor Item

Condition

Value/Status

Revision: 2013 October

2014 JUKE

BCS-40

< ECU DIAGNOSIS INFORMATION >

[WITH INTELLIGENT KEY SYSTEM]

BCM

CONFIRM ID3

The key ID that the key slot receives is not recognized by the third key ID
registered to BCM.

Yet

The key ID that the key slot receives is recognized by the third key ID reg-
istered to BCM.

Done

CONFIRM ID2

The key ID that the key slot receives is not recognized by the second key
ID registered to BCM.

Yet

The key ID that the key slot receives is recognized by the second key ID
registered to BCM.

Done

CONFIRM ID1

The key ID that the key slot receives is not recognized by the first key ID
registered to BCM.

Yet

The key ID that the key slot receives is recognized by the first key ID reg-
istered to BCM.

Done

NOT REGISTERED

BCM detects registered key ID, or BCM does not detect key ID.

ID OK

BCM detects non-registration key ID.

ID NG

TP 4

The ID of fourth key is not registered to BCM

Yet

The ID of fourth key is registered to BCM

Done

TP 3

The ID of third key is not registered to BCM

Yet

The ID of third key is registered to BCM

Done

TP 2

The ID of second key is not registered to BCM

Yet

The ID of second key is registered to BCM

Done

TP 1

The ID of first key is not registered to BCM

Yet

The ID of first key is registered to BCM

Done

AIR PRESS FL

Ignition switch ON (Only when the signal from the transmitter is received)

Air pressure of front

LH tire

AIR PRESS FR

Ignition switch ON (Only when the signal from the transmitter is received)

Air pressure of front

RH tire

AIR PRESS RR

Ignition switch ON (Only when the signal from the transmitter is received)

Air pressure of rear

RH tire

AIR PRESS RL

Ignition switch ON (Only when the signal from the transmitter is received)

Air pressure of rear

LH tire

ID REGST FL1

ID of front LH tire transmitter is registered

Done

ID of front LH tire transmitter is not registered

Yet

ID REGST FR1

ID of front RH tire transmitter is registered

Done

ID of front RH tire transmitter is not registered

Yet

ID REGST RR1

ID of rear RH tire transmitter is registered

Done

ID of rear RH tire transmitter is not registered

Yet

ID REGST RL1

ID of rear LH tire transmitter is registered

Done

ID of rear LH tire transmitter is not registered

Yet

WARNING LAMP

Tire pressure indicator OFF

Off

Tire pressure indicator ON

BUZZER

Tire pressure warning alarm is not sounding

Off

Tire pressure warning alarm is sounding

Monitor Item

Condition

Value/Status

Revision: 2013 October

2014 JUKE

BCS-42

< ECU DIAGNOSIS INFORMATION >

[WITH INTELLIGENT KEY SYSTEM]

BCM

Terminal No.

(Wire color)

Description

Condition

Value

(Approx.)

Signal name

Input/

Output

−

(L)

Ground

Combination switch
INPUT 5

Input

Combination
switch
(Wiper intermit-
tent dial 4)

All switches OFF

0 V

Turn signal switch RH

1.0 V

Lighting switch HI

Lighting switch 1ST

Lighting switch 2ND

2.0 V

(GR)

Ground

Combination switch
INPUT 4

Input

Combination
switch
(Wiper intermit-
tent dial 4)

All switches OFF

0 V

Turn signal switch LH

1.0 V

Lighting switch PASS

Lighting switch 2ND

Front fog lamp switch ON

0.8 V

(BR)

Ground

Combination switch
INPUT 3

Input

Combination
switch
(Wiper intermit-
tent dial 4)

All switches OFF

0 V

Front wiper switch LO

1.0 V

Front wiper switch MIST

Front wiper switch INT

Lighting switch AUTO

PKIB4958J

JPMIA0342JP

PKIB4958J

PKIB4956J

PKIB4958J

Revision: 2013 October

2014 JUKE

BCS

BCM

BCS-43

< ECU DIAGNOSIS INFORMATION >

[WITH INTELLIGENT KEY SYSTEM]

(G)

Ground

Combination switch
INPUT 2

Input

Combination
switch

All switches OFF
(Wiper intermittent dial 4)

0 V

Front washer switch ON
(Wiper intermittent dial 4)

1.0 V

Rear washer switch ON
(Wiper intermittent dial 4)

Any of the condition below
with all switches OFF
• Wiper intermittent dial 1
• Wiper intermittent dial 5
• Wiper intermittent dial 6

Rear wiper switch ON
(Wiper intermittent dial 4)

0.8 V

(W)

Ground

Combination switch
INPUT 1

Input

Combination
switch

All switches OFF
(Wiper intermittent dial 4)

0 V

Front wiper switch HI
(Wiper intermittent dial 4)

1.0 V

Rear wiper switch INT
(Wiper intermittent dial 4)

Wiper intermittent dial 3
(All switches OFF)

Any of the condition below
with all switches OFF
• Wiper intermittent dial 1
• Wiper intermittent dial 2

1.9 V

Any of the condition below
with all switches OFF
• Wiper intermittent dial 6
• Wiper intermittent dial 7

0.8 V

Terminal No.

(Wire color)

Description

Condition

Value

(Approx.)

Signal name

Input/

Output

−

PKIB4958J

PKIB4956J

PKIB4958J

PKIB4952J

PKIB4956J

Revision: 2013 October

2014 JUKE

BCS-44

< ECU DIAGNOSIS INFORMATION >

[WITH INTELLIGENT KEY SYSTEM]

BCM

(L)

Ground

Door key cylinder
switch UNLOCK

Input

Door key cylin-
der switch

NEUTRAL position

7.0 - 8.0 V

UNLOCK position

0 V

(R)

Ground

Door key cylinder
switch LOCK

Input

Door key cylin-
der switch

NEUTRAL position

7.0 - 8.0 V

LOCK position

0 V

(R)

Ground

Stop lamp switch 1

Input

Stop lamp
switch

OFF (Brake pedal is not
depressed)

0 V

ON (Brake pedal is de-
pressed)

Battery voltage

(W)

—

(Y)*

(GR)*

Ground

Door lock and unlock
switch LOCK

Input

Door lock and
unlock switch

NEUTRAL position

1.0 - 1.5 V

LOCK position

0 V

(BR)

Ground

Door lock and unlock
switch UNLOCK

Input

Door lock and
unlock switch

NEUTRAL position

1.0 - 1.5 V

UNLOCK position

0 V

(P)

Ground

Optical sensor

Input

Ignition switch
ON

When bright outside of the
vehicle

Close to 5 V

When dark outside of the
vehicle

Close to 0 V

(R)

Ground

Sensor power sup-
ply

Output

Ignition switch

OFF, ACC

0 V

5 V

Terminal No.

(Wire color)

Description

Condition

Value

(Approx.)

Signal name

Input/

Output

−

PKIB4960J

JPMIA0012GB

Revision: 2013 October

2014 JUKE

BCS

BCM

BCS-45

< ECU DIAGNOSIS INFORMATION >

[WITH INTELLIGENT KEY SYSTEM]

(V)

Ground

Receiver ground

Input

Ignition switch ON

0 V

(P)

Ground

NATS antenna amp.

Input/

Output

Intelligent Key:
Intelligent Key
battery is re-
moved

Brake pedal: Depressed
NOTE:
Waveform varies each
time when brake pedal is
depressed

Brake pedal: Not de-
pressed

12 V

(R)

Ground

Security indicator
lamp

Output

Security indica-
tor lamp

0 V

Blinking (Ignition switch
OFF)

12.0 V

OFF

Battery voltage

(SB)

Ground

Dongle link

Input/

Output

Ignition switch OFF

5 V

(LG)

Ground

NATS antenna amp.

Input/

Output

During waiting

Brake pedal: Depressed
NOTE:
Waveform varies each
time when brake pedal is
depressed

Brake pedal: Not de-
pressed

12 V

(W)

Ground

A/C ON

Input

A/C

OFF (A/C switch indicator:
OFF)

1.0 - 1.5 V

ON (A/C switch indicator:
ON)

0 V

Terminal No.

(Wire color)

Description

Condition

Value

(Approx.)

Signal name

Input/

Output

−

JMKIA6232JP

JPMIA0590GB

JMKIA6233JP

JPMIA0012GB

Revision: 2013 October

2014 JUKE

BCS-46

< ECU DIAGNOSIS INFORMATION >

[WITH INTELLIGENT KEY SYSTEM]

BCM

(O)*

(LG)*

Ground

Blower fan switch

Input

Fan switch

Blower fan switch OFF

0 V

Blower fan switch ON

7.0 - 8.0 V

(L)*

(SB)*

Ground

Hazard switch

Input

Hazard switch

OFF

12 V

0 V

(L)

Ground

Back door opener
switch

Input

Back door
opener switch

Pressed

0 V

Not pressed

1.0 - 1.5 V

(GR)

Ground

Front door lock as-
sembly driver side
(Unlock sensor)

Input

Driver door

LOCK status (Unlock sen-
sor switch OFF)

7.0 - 8.0 V

UNLOCK status (Unlock
sensor switch ON)

0 V

(LG)

Ground

Combination switch
OUTPUT 5

Output

Combination
switch

All switches OFF
(Wiper intermittent dial 4)

7.0 - 8.0 V

Front fog lamp switch ON
(Wiper intermittent dial 4)

1.0 V

Rear wiper switch ON
(Wiper intermittent dial 4)

Any of the condition below
with all switches OFF
• Wiper intermittent dial 1
• Wiper intermittent dial 2
• Wiper intermittent dial 6
• Wiper intermittent dial 7

Terminal No.

(Wire color)

Description

Condition

Value

(Approx.)

Signal name

Input/

Output

−

PKIB4960J

JPMIA0012GB

PKIB4960J

PKIB4956J

Revision: 2013 October

2014 JUKE

BCS

BCM

BCS-47

< ECU DIAGNOSIS INFORMATION >

[WITH INTELLIGENT KEY SYSTEM]

(Y)

Ground

Combination switch
OUTPUT 4

Output

Combination
switch

All switches OFF
(Wiper intermittent dial 4)

7.0 - 8.0 V

Lighting switch 1ST
(Wiper intermittent dial 4)

1.2 V

Lighting switch AUTO
(Wiper intermittent dial 4)

Rear wiper switch INT
(Wiper intermittent dial 4)

Any of the condition below
with all switches OFF
• Wiper intermittent dial 1
• Wiper intermittent dial 5
• Wiper intermittent dial 6

(V)

Ground

Combination switch
OUTPUT 3

Output

Combination
switch

All switches OFF
(Wiper intermittent dial 4)

7.0 - 8.0 V

Lighting switch 2ND
(Wiper intermittent dial 4)

1.2 V

Lighting switch HI
(Wiper intermittent dial 4)

Rear washer switch ON
(Wiper intermittent dial 4)

Any of the condition below
with all switches OFF
• Wiper intermittent dial 1
• Wiper intermittent dial 2
• Wiper intermittent dial 3

Terminal No.

(Wire color)

Description

Condition

Value

(Approx.)

Signal name

Input/

Output

−

PKIB4960J

PKIB4958J

PKIB4960J

PKIB4958J

Revision: 2013 October

2014 JUKE

BCS-48

< ECU DIAGNOSIS INFORMATION >

[WITH INTELLIGENT KEY SYSTEM]

BCM

(R)

Ground

Combination switch
OUTPUT 2

Output

Combination
switch
(Wiper intermit-
tent dial 4)

All switches OFF

7.0 - 8.0 V

Lighting switch 2ND

1.2 V

Lighting switch PASS

Front wiper switch INT

Front wiper switch HI

(P)

Ground

Combination switch
OUTPUT 1

Output

Combination
switch
(Wiper intermit-
tent dial 4)

All switches OFF

7.0 - 8.0 V

Turn signal switch RH

1.2 V

Turn signal switch LH

Front wiper switch LO

Front wiper switch MIST

Front washer switch ON

(G)

Ground

Detention switch

Input

Selector lever

P position (Release selec-
tor button)

0 V

P position (Push selector
button)

12 V

Any position other than P

Terminal No.

(Wire color)

Description

Condition

Value

(Approx.)

Signal name

Input/

Output

−

PKIB4960J

PKIB4958J

PKIB4960J

PKIB4958J

Revision: 2013 October

2014 JUKE

BCS

BCM

BCS-49

< ECU DIAGNOSIS INFORMATION >

[WITH INTELLIGENT KEY SYSTEM]

(SB)

Ground

Receiver communi-
cation

Input/

Output

Ignition switch
OFF (Remote
keyless entry
communication)

Waiting

ñÒ12 V

When operating either
button on Intelligent Key

Ignition switch
ON (TPMS
communication)

Waiting

When receiving signal
from tire pressure sensor

(L)

Ground

CAN-H

Input/

Output

—

(P)

Ground

CAN-L

Input/

Output

—

(P)

Ground

Back door switch

Input

Back door
switch

OFF
(When back door closed)

7.0 - 8.0 V

ON
(When back door opened)

0 V

(LG)

Ground

Rear wiper stop po-
sition

Input

Ignition switch
ON

Rear wiper stop position

12 V

Any position other than
rear wiper stop position

0 V

(R)

Ground

Passenger door
switch

Input

Passenger door
switch

OFF (When passenger
door closed)

7.0 - 8.0 V

ON (When passenger
door opened)

0 V

Terminal No.

(Wire color)

Description

Condition

Value

(Approx.)

Signal name

Input/

Output

−

JMMIA0572GB

JMMIA0573GB

JMMIA0574GB

PKIB4960J

Revision: 2013 October

2014 JUKE

BCS-50

< ECU DIAGNOSIS INFORMATION >

[WITH INTELLIGENT KEY SYSTEM]

BCM

(LG)

Ground

Rear RH door switch

Input

Rear RH door
switch

OFF (When rear RH door
closed)

7.0 - 8.0 V

ON (When rear RH door
opened)

0 V

(SB)

Ground

Driver door switch

Input

Driver door
switch

OFF (When driver door
closed)

7.0 - 8.0 V

ON (When driver door
opened)

0 V

(BR)

Ground

Rear LH door switch

Input

Rear LH door
switch

OFF (When rear LH door
closed)

7.0 - 8.0 V

ON (When rear door LH
opened)

0 V

(L)

Ground

Luggage room lamp

Output

Luggage room
lamp

OFF

12 V

0 V

(Y)

Ground

Back door request
switch

Input

Back door re-
quest switch

ON (Pressed)

0 V

OFF (Not pressed)

12 V

(GR)

Ground

Back door open

Output

Back door

OFF (Actuator is not acti-
vated)

0 V

OPEN (Actuator is activat-
ed)

12 V

(P)

Ground

Rear wiper

Output

Rear wiper

OFF (Stopped)

0 V

ON (Activated)

12 V

(G)

Ground

Rear door UNLOCK

Output

Rear door

UNLOCK (Actuator is acti-
vated)

12 V

Other then UNLOCK (Ac-
tuator is not activated)

0 V

(LG)*

(P)*

Ground

Interior room lamp
power supply

Output

Interior room lamp battery saver is activated.
(Cuts the interior room lamp power supply)

0 V

Interior room lamp battery saver is not acti-
vated.
(Outputs the interior room lamp power sup-
ply)

12 V

Terminal No.

(Wire color)

Description

Condition

Value

(Approx.)

Signal name

Input/

Output

−

PKIB4960J

Revision: 2013 October

2014 JUKE

BCS

BCM

BCS-51

< ECU DIAGNOSIS INFORMATION >

[WITH INTELLIGENT KEY SYSTEM]

(L)

Ground

Battery power sup-
ply

Input

Ignition switch OFF

Battery voltage

(SB)

Ground

Passenger door UN-
LOCK

Output

Passenger door

UNLOCK (Actuator is acti-
vated)

12 V

Other then UNLOCK (Ac-
tuator is not activated)

0 V

(V)

Ground

Turn signal LH

Output

Ignition switch
ON

Turn signal switch OFF

0 V

Turn signal switch LH

6.0 V

(W)

Ground

Turn signal RH

Output

Ignition switch
ON

Turn signal switch OFF

0 V

Turn signal switch RH

6.0 V

(BR)

Ground

Interior room lamp
control

Output

Interior room
lamp

OFF

12 V

0 V

(R)

Ground

Cranking request

input

Ignition switch OFF

3.6 V

Ignition switch
ON

Engine stopped (Selector
lever is in P position)

0 V

Engine stopped (Selector
lever is not in P position)

12 V

Engine running

12 V

(V)

Ground

All doors LOCK

Output

All doors

LOCK (Actuator is activat-
ed)

12 V

Other then LOCK (Actua-
tor is not activated)

0 V

(W)

Ground

Driver door UN-
LOCK

Output

Driver door

UNLOCK (Actuator is acti-
vated)

12 V

Other then UNLOCK (Ac-
tuator is not activated)

0 V

(B)

Ground

Output

Ignition switch ON

0 V

(L)

Ground

P/W power supply
(IGN)

Output

Ignition switch ON

12 V

(P)

Ground

P/W power supply
(BAT)

Output

Ignition switch OFF

12 V

(Y)

Ground

Battery power sup-
ply

Input

Ignition switch OFF

Battery voltage

Terminal No.

(Wire color)

Description

Condition

Value

(Approx.)

Signal name

Input/

Output

−

PKIC6370E

Revision: 2013 October

2014 JUKE

BCS-52

< ECU DIAGNOSIS INFORMATION >

[WITH INTELLIGENT KEY SYSTEM]

BCM

(LG)

Ground

Driver door request
switch

Input

Driver door re-
quest switch

ON (Pressed)

0 V

OFF (Not pressed)

12 V

(LG)

Ground

Push-button ignition
switch (push switch)

Input

Push-button ig-
nition switch
(push switch)

Pressed

0 V

Not pressed

12 V

(P)

Ground

Driver door antenna
(+)

Output

When the driver
door request
switch is operat-
ed with ignition
switch ON

When Intelligent Key is
not in the antenna detec-
tion area
(The distance between In-
telligent Key and antenna:
Approx. 2 m)

When Intelligent Key is in
the antenna detection
area
(The distance between In-
telligent Key and antenna:
80 cm or less)

(V)

Ground

Driver door antenna
(-)

Output

When the driver
door request
switch is operat-
ed with ignition
switch ON

When Intelligent Key is
not in the antenna detec-
tion area
(The distance between In-
telligent Key and antenna:
Approx. 2 m)

When Intelligent Key is in
the antenna detection
area
(The distance between In-
telligent Key and antenna:
80 cm or less)

Terminal No.

(Wire color)

Description

Condition

Value

(Approx.)

Signal name

Input/

Output

−

JMKIA5954GB

JMKIA5955GB

JMKIA5954GB

JMKIA5955GB

Revision: 2013 October

2014 JUKE

BCS

BCM

BCS-53

< ECU DIAGNOSIS INFORMATION >

[WITH INTELLIGENT KEY SYSTEM]

(LG)

Ground

Passenger door an-
tenna (+)

Output

When the pas-
senger door re-
quest switch is
operated with
ignition switch
ON

When Intelligent Key is
not in the antenna detec-
tion area
(The distance between In-
telligent Key and antenna:
Approx. 2 m)

When Intelligent Key is in
the antenna detection
area
(The distance between In-
telligent Key and antenna:
80 cm or less)

(Y)

Ground

Passenger door an-
tenna (-)

Output

When the pas-
senger door re-
quest switch is
operated with
ignition switch
ON

When Intelligent Key is
not in the antenna detec-
tion area
(The distance between In-
telligent Key and antenna:
Approx. 2 m)

When Intelligent Key is in
the antenna detection
area
(The distance between In-
telligent Key and antenna:
80 cm or less)

(W)

Ground

Rear bumper anten-
na (+)

Output

When the back
door request
switch is operat-
ed with ignition
switch ON

When Intelligent Key is
not in the antenna detec-
tion area
(The distance between In-
telligent Key and antenna:
Approx. 2 m)

When Intelligent Key is in
the antenna detection
area
(The distance between In-
telligent Key and antenna:
80 cm or less)

Terminal No.

(Wire color)

Description

Condition

Value

(Approx.)

Signal name

Input/

Output

−

JMKIA5954GB

JMKIA5955GB

JMKIA5954GB

JMKIA5955GB

JMKIA5954GB

JMKIA5955GB

Revision: 2013 October

2014 JUKE

Nissan Juke (2014 year). Service Repair Manual - part 15