Nissan Juke (2016 year). Service Repair Manual - part 498

 

  Index      Manuals     Nissan Juke (2016 year) - Service and Repair Manual

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

Content      ..     496      497      498      499     ..

 

 

Nissan Juke (2016 year). Service Repair Manual - part 498

 

 

MWI-8

< SYSTEM DESCRIPTION >

SYSTEM

SYSTEM

METER SYSTEM
METER SYSTEM : System Diagram

INFOID:0000000012201295

METER SYSTEM : System Description

INFOID:0000000012201296

COMBINATION METER

• The combination meter receives necessary signals from each unit, switch, and sensor to control the follow-

ing functions.

- Measuring instruments

- Shift position indicator

- Warning lamps

- Indicator lamps

- Meter illumination control

- Meter effect function

- Information display

• The combination meter incorporates a buzzer function that sounds an audible alarm with the integrated

buzzer device. Refer to 

WCS-6, "Combination Meter"

 for further details.

• The combination meter includes an on board diagnosis function.

• The combination meter can be diagnosed with CONSULT.

METER CONTROL FUNCTION LIST

JSNIA6876GB

System

Description

Reference

Measuring in-
struments

Speedometer

Indicates vehicle speed.

MWI-11, 
"SPEEDOME-
TER : System De-
scription"

Tachometer

Indicates engine speed.

MWI-12, "TA-
CHOMETER : 
System Descrip-
tion"

Revision: November 2015

2016 JUKE

MWI

SYSTEM

MWI-9

< SYSTEM DESCRIPTION >

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

ARRANGEMENT OF COMBINATION METER

Shift position indicator (CVT models)

Display shift position. (CVT models)

MWI-13, "SHIFT 
POSITION INDI-
CATOR : System 
Description"

Warning lamp/
indicator lamp

Oil pressure warning lamp

The warning lamp turns ON or turns OFF, 
according to engine hydraulic pressure.

MWI-13, "OIL 
PRESSURE 
WARNING LAMP 
: System Descrip-
tion"

Meter illumi-
nation control

Meter illumination control function

Switches back and forth between daytime 
mode and nighttime mode, according to a 
light switch position.

MWI-14, "METER 
ILLUMINATION 
CONTROL : Sys-
tem Description"

Meter illumination on/off control function 

The meter illumination turns ON/OFF, ac-
cording to the status of ignition switch and a 
cranking condition.

Buck light illumination control function

The operation of the illumination control 
switch allows the brightness adjustment of 
meter illumination.

Meter effect 
function

Engine-start effect function

Controls pointers of combination meter and 
meter illumination at engine start to produce 
illumination effects.

MWI-15, "METER 
EFFECT FUNC-
TION : System 
Description"

Information 
display

Fuel gauge

Indicates fuel level.

MWI-16, "INFOR-
MATION DIS-
PLAY : System 
Description"

Odo/trip meter

Displays mileage.

Ambient temperature

Displays ambient temperature.

Trip computer

Current fuel consumption

Displays current fuel consumption.

Average fuel consumption

Displays average fuel consumption.

Distance to empty

Displays distance to empty.

Torque distribution indicator 

Display torque distribution.

Interrupt indi-
cation

Meter illumination level

Indicates the brightness of the meter illumi-
nation in stages.

Distance to empty

Displays distance to empty when a low fuel 
warning.

Warning

Fuel filler cap 
warning

Warns, according to the tightening condition 
of fuel filler cap.

EC-62, "FUEL 
FILLER CAP 
WARNING SYS-
TEM : System 
Description"

 (MR 

for NISMO RS 
models) or 

EC-

652, "FUEL FILL-
ER CAP WARN-
ING SYSTEM : 
System Descrip-
tion"

 (MR except 

for NISMO RS 
models)

Low tire pres-
sure warning

Warns, according to tire inflation pressure.

MWI-16, "INFOR-
MATION DIS-
PLAY : System 
Description"

System

Description

Reference

Revision: November 2015

2016 JUKE

MWI-10

< SYSTEM DESCRIPTION >

SYSTEM

METER SYSTEM : Fail-Safe

INFOID:0000000012839331

FAIL-SAFE

The combination meter activates the fail-safe control if CAN communication with each unit is malfunctioning.

A.

For U.S.A.

B.

For Canada

JSNIA8950ZZ

Function

Specifications

Speedometer

Reset to zero by suspending communication.

Tachometer

Illumination control

When suspending communication, changes to nighttime mode.

Shift position indicator

When suspending communication, not indicate.

Information display

Instantaneous fuel consumption

• When reception time of an abnormal signal is 2 seconds or 

less, the last received datum is used for calculation to indi-
cate the result.

• When reception time of an abnormal signal is more than two 

seconds, the last result calculated during normal condition is 
indicated.

Average fuel consumption

Possible driving distance

Torque distribution indicator

Low tire pressure warning

The display turns OFF by suspending communication.

Buzzer

The buzzer turns OFF by suspending communication.

Revision: November 2015

2016 JUKE

MWI

SYSTEM

MWI-11

< SYSTEM DESCRIPTION >

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

SPEEDOMETER
SPEEDOMETER : System Diagram

INFOID:0000000012201298

SPEEDOMETER : System Description

INFOID:0000000012201299

• The ABS actuator and electric unit (control unit) converts the rectangular wave signal provided by the wheel

sensor to a vehicle speed signal and transmits it to the combination meter via CAN communication. 

• The combination meter indicates the vehicle speed to the speedometer according to the vehicle speed sig-

nal received via CAN communication. 

TACHOMETER

Warning lamp/indicator lamp

ABS warning lamp

The lamp turns ON by suspending communication.

Malfunction indicator lamp

VDC warning lamp

EPS warning lamp

AWD warning lamp

Brake warning lamp

VDC OFF indicator lamp

The lamp turns OFF by suspending communication.

High beam indicator lamp

Turn signal indicator lamp

Door warning lamp

Tail lamp indicator lamp

Engine start operation indicator lamp

Shift P warning lamp

Front fog lamp indicator lamp

Oil pressure warning lamp

CRUISE indicator lamp

AWD mode indicator lamp (AWD)

AWD mode indicator lamp (AWD-V)

Key warning lamp

CVT indicator lamp

Low tire pressure warning lamp

After blinking for 1 minute, the lamp remains ON.

High coolant temperature indicator 
lamp

When reception time of an abnormal signal is more than 60 
seconds, the lamp turns OFF.

Function

Specifications

JSNIA2973GB

Revision: November 2015

2016 JUKE

MWI-12

< SYSTEM DESCRIPTION >

SYSTEM

TACHOMETER : System Diagram

INFOID:0000000012201300

CVT models

M/T models

TACHOMETER : System Description

INFOID:0000000012201301

CVT models

• ECM converts the pulse signal provided by the crankshaft position sensor to an engine speed signal and

transmits it to the TCM via CAN communication.

• TCM transmits the engine speed signal received from ECM via CAN communication to the combination

meter via CAN communication.

• The combination meter indicates the engine speed to the tachometer according to the engine speed signal

received via CAN communication. 

M/T models

• ECM converts the pulse signal provided by the crankshaft position sensor to an engine speed signal and

transmits it to the combination meter via CAN communication.

• The combination meter indicates the engine speed to the tachometer according to the engine speed signal

received via CAN communication. 

SHIFT POSITION INDICATOR
SHIFT POSITION INDICATOR : System Diagram

INFOID:0000000012201302

JSNIA7198GB

JSNIA2974GB

JSNIA6671GB

Revision: November 2015

2016 JUKE

MWI

SYSTEM

MWI-13

< SYSTEM DESCRIPTION >

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

SHIFT POSITION INDICATOR : System Description

INFOID:0000000012201303

The combination meter receives the shift position signal from TCM via CAN communication, and displays the

shift position to the shift position indicator.

MANUAL MODE

When operated with CVT shift selector

• The combination meter receives the manual mode signal, non-manual mode signal, manual mode shift up

signal, and manual mode shift down signal from CVT shift selector and transmits them to TCM via CAN com-

munication. 

• TCM recognizes the manual mode operation status according to the manual mode signal, non-manual mode

signal, manual mode shift up signal, and manual mode shift down signal received via CAN communication

and transmits the manual mode indicator signal to the combination meter via CAN communication. 

• The combination meter indicates shift position according to the shift position signal received via CAN com-

munication. 

When operated with paddle shifter

• The combination meter receives the manual mode signal from CVT shift selector, paddle shifter up signal

and paddle shifter down signal from paddle shifter and transmits them to TCM via CAN communication.

• TCM recognizes the manual mode operation status according to the manual mode signal, manual mode

shift up signal, and manual mode shift down signal received via CAN communication and transmits the shift

position signal to the combination meter via CAN communication.

• The combination meter indicates shift position according to the shift position signal via CAN communication.

NON-MANUAL MODE

• TCM transmits the shift position signal to the combination meter via CAN communication. 

• The combination meter indicates shift position according to the shift position signal received via CAN com-

munication. 

SHIFT REFUSAL WARNING AND ALARM

• TCM sends a manual mode shift refusal signal to the combination meter via CAN communication when shift-

up and shift-down can not be operated in manual mode.

• The combination meter blinks the shift position indicator and sounds a buzzer according to a manual mode

shift refusal signal received via CAN communication.

OIL PRESSURE WARNING LAMP
OIL PRESSURE WARNING LAMP : System Diagram

INFOID:0000000012201304

OIL PRESSURE WARNING LAMP : System Description

INFOID:0000000012201305

The combination meter turns the oil pressure warning lamp ON when receiving ECM to the oil pressure warn-

ing lamp signal via CAN communication. For details, refer to 

EC-45, "Oil Pressure Warning Lamp"

 (MR for

NISMO RS models) or 

EC-619, "Oil Pressure Warning Lamp"

 (MR except for NISMO RS models).

METER ILLUMINATION CONTROL

JSNIA3115GB

Revision: November 2015

2016 JUKE

MWI-14

< SYSTEM DESCRIPTION >

SYSTEM

METER ILLUMINATION CONTROL : System Diagram

INFOID:0000000012201306

METER ILLUMINATION CONTROL : System Description

INFOID:0000000012201307

METER ILLUMINATION CONTROL FUNCTION

• Combination meter controls meter illumination, based on the following signal.

- Position light request signal

• The combination meter switches mode between Daytime mode and Nighttime mode, according to the fol-

lowing conditions.

*: For further information, refer to 

INL-9, "ILLUMINATION CONTROL SYSTEM : System Description"

.

BUCK LIGHT ILLUMINATION CONTROL FUNCTION

The operation of the illumination control switch allows the brightness adjustment of meter illumination.

METER ILLUMINATION ON/OFF CONTROL FUNCTION

• Combination meter turns ON meter illumination when the following condition is satisfied:

- Ignition switch ON

• Combination meter turns OFF meter illumination when any of the following condition is satisfied:

- During a crank with vehicle speed less than 1 km/h (0.6 MPH) and ACC power supply OFF

- Ignition switch OFF or ACC power supply OFF

• The combination meter receives the following signals to control meter illumination.

METER EFFECT FUNCTION

JSNIA3378GB

Condition

Meter illumination

Combination switch
(lighting switch)

1ST or 2ND position

Nighttime mode

AUTO POSITION

Outdoor: Bright*

Daytime mode

Outdoor: Dark*

Nighttime mode

Off

Daytime mode

Meter illumination

The number of adjustable 

steps

Daytime

12 step

Nighttime

12 step

Signal name

Signal path

Ignition signal

—

Engine status signal

ECM 

 Combination meter

Vehicle speed signal

ABS actuator and control unit (control unit) 

 Combination meter

Revision: November 2015

2016 JUKE

MWI

SYSTEM

MWI-15

< SYSTEM DESCRIPTION >

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

METER EFFECT FUNCTION : System Diagram

INFOID:0000000012201308

CVT models

M/T models

METER EFFECT FUNCTION : System Description

INFOID:0000000012201309

ENGINE-START EFFECT FUNCTION

When recognizing an engine start, the combination meter controls the following items for producing the effect.

• Speedometer

• Tachometer

• Each meter pointer illumination

• Meter illumination

• Information display illumination

• Shift position indicator (CVT models)

• Start-up illumination (M/T models)

Meter and Illumination Operations During Engine-start Effect

The combination meter controls the following items during the engine-start effect.

NOTE:

The pointers are stopped and illumination is turned off while cranking the engine.

Engine Start Judgement

The combination meter judges “engine-start” and activates the engine-start effect only once when the follow-

ing operational conditions are all satisfied.

JSNIA7939GB

JSNIA7636GB

Control item

Operation

Speedometer

Sweeps the pointer.

Tachometer

Sweeps the pointer.

Each meter pointer illumination

Turns on the illumination at the effect level.

Meter illumination

Increases the brightness to the effect level in stages.

Information display illumination

Turns on the illumination at the normal brightness level.

Shift position indicator (CVT models)

Turns ON at effect level brightness after staying OFF for 2 
seconds. 

Start-up illumination (M/T models)

Turns ON/OFF in stages between OFF and the effect level 
brightness.

Revision: November 2015

2016 JUKE

 

 

 

 

 

 

 

Content      ..     496      497      498      499     ..