Nissan Juke (2016 year). Service Repair Manual - part 403

PLEASE HELP MAKE THIS SERVICE MANUAL BETTER!

Your comments are important to NISSAN and will help us to improve our Service Manuals.
Use this form to report any issues or comments you may have regarding our Service Manuals.
Please print this form and type or write your comments below. Mail or fax to:

Nissan North America, Inc.
Technical Service Information
39001 Sunrise Drive, P.O. Box 9200
Farmington Hills, MI USA 48331
FAX: (248) 488-3

SERVICE MANUAL: Model:

Year:

PUBLICATION NO. (Refer to Quick Reference Index ):

Please describe any Service Manual issues or problems in detail:
Page number(s)

Note: Please include a copy of each page, marked with your comments.

Are the trouble diagnosis procedures logical and easy to use? (circle your answer)

YES

If no, what page number(s)?

Note: Please include a copy of each page, marked with your comments.

Please describe the issue or problem in detail:

Is the organization of the manual clear and easy to follow? (circle your answer)

YES

Please comment:

What information should be included in NISSAN Service Manuals to better support you in servicing or
repairing customer vehicles?

DATE:

YOUR NAME:

POSITION:

DEALER:

DEALER NO.:

ADDRESS:

CITY:

STATE/PROV./COUNTRY:

ZIP/POSTAL CODE:

QUICK REFERENCE CHART JUKE

PFP:00000

ENGINE TUNE-UP DATA (MR16DDT)

ELS0003W

*: Under the following conditions

• A/C switch: OFF

• Electric load: OFF (Lights, heater fan & rear window defogger)

• Steering wheel: Kept in straight-ahead position

Engine model

MR16DDT

Firing order

1 - 3 - 4 - 2

Idle speed

rpm

CVT: No load* (in P or N position)

650

M/T: No load* (in Neutral position)

600

Ignition timing (BTDC at idle speed)

For NISMO RS models

CVT: No load* (in P or N position)

M/T: No load* (in Neutral position)

Except for NISMO RS models

CVT: No load* (in P or N position)

M/T: No load* (in Neutral position)

Tensions of drive belt

Belt tension is not necessary, as it is automatically adjusted

by drive belt auto-tensioner.

Radiator cap relief pressure

kPa (kg/cm

, psi)

For NISMO RS models

Standard

78 - 98 (0.8 - 1.0, 11 - 14)

Limit

59 (0.6, 9)

Except for NISMO RS models

Standard

80 - 100 (0.8 - 1.0, 11.6 - 14.5)

Limit

60 (0.6, 8.7)

Cooling system leakage testing pressure

kPa (kg/cm

, psi)

For NISMO RS models

98 (1.0, 14)

Except for NISMO RS models

100 (1.0, 14.5)

Compression pressure

kPa (kg/cm

, psi)/rpm

For NISMO RS models

Standard

1,560 (15.9, 226.2)/250

Minimum

1,190 (12.1, 172.6)/250

Differential limit between cylinders

100 (1.0, 14.5)/250

Except for NISMO RS models

Standard

1,550 (15.81, 224.7)/200

Minimum

1,290 (13.15, 187.0)/200

Differential limit between cylinders

100 (1.0, 14.5)/200

Spark plug (Iridium-tipped type)

For NISMO RS models

Make

NGK

Standard type

DILKAR7C9H

Except for NISMO RS models

Make

NGK

Standard type

DILKAR7E9HS

Gap (Nominal)

Standard

0.9 (0.035)

Limit

1.1 (0.043)

2016

QUICK REFERENCE CHART JUKE

FRONT WHEEL ALIGNMENT

ELS0003X

Measure value under unladen*

conditions.

*1: A difference when assumed the left side a standard.
*2: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

REAR WHEEL ALIGNMENT

2WD

FOR USA MODELS

Measure value under unladen

conditions.

*1: Since adjustment mechanism is not included, the value of the left and right wheels (both wheels) must be used as the standard
value.

*2: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

Item

Standard

Axle type

2WD

AWD

Camber
Degree minute (Decimal degree)

Minimum

–1

′

(–1.16

)

Nominal

–0

′

(–0.42

)

Maximum

′

(0.33

)

Left and right difference*

–0

′

(–0.75

) - 0

′

(0.75

)

Caster
Degree minute (Decimal degree)

Minimum

′

(3.75

)

′

(3.84

)

Nominal

′

(4.50

)

′

(4.58

)

Maximum

′

(5.25

)

′

(5.33

)

Left and right difference*

–0

′

(–0.75

) - 0

′

(0.75

)

Kingpin inclination
Degree minute (Decimal degree)

Minimum

′

(10.67

)

Nominal

′

(11.42

)

Maximum

′

(12.16

)

Toe-in

Total toe-in
Distance

Minimum

0 mm (0.00 in)

Nominal

In 2 mm (In 0.08 in)

Maximum

In 4 mm (In 0.16 in)

Total toe-angle
Degree minute (Decimal degree)

Minimum

Out 0

′

″

(Out 0.03

)

Nominal

In 0

′

″

(In 0.17

)

Maximum

In 0

′

″

(In 0.36

)

Item

Standard

Camber
Degree minute (Decimal degree)

Minimum

−

′

(

−

2.01

)

Nominal

−

′

(

−

1.52

)

Maximum

−

′

(

−

1.02

)

Toe-in

Total toe-in
Distance

Minimum

Out 1.1 mm (Out 0.043 in)

Nominal

In 2.9 mm (In 0.114 in)

Maximum

In 6.9 mm (In 0.272 in)

Toe angle (left wheel and right wheel)

Degree minute (Decimal degree)

Minimum

Out 0

′

″

(Out 0.08

)

Nominal

In 0

′

″

(In 0.25

)

Maximum

In 0

′

″

(In 0.58

)

2016

QUICK REFERENCE CHART JUKE

FOR CANADA MODELS

Measure value under unladen

conditions.

*1: Since adjustment mechanism is not included, the value of the left and right wheels (both wheels) must be used as the standard
value.

*2: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

AWD
FOR USA MODELS

Measure value under unladen* conditions.

*: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

FOR CANADA MODELS

Measure value under unladen* conditions.

*: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

Item

Standard

Camber
Degree minute (Decimal degree)

Minimum

−

′

(

−

2.01

)

Nominal

−

′

(

−

1.52

)

Maximum

−

′

(

−

1.02

)

Toe-in

Total toe-in
Distance

Minimum

Out 1.2 mm (Out 0.047 in)

Nominal

In 2.8 mm (In 0.11 in)

Maximum

In 6.8 mm (In 0.268 in)

Toe angle (left wheel and right wheel)

Degree minute (Decimal degree)

Minimum

Out 0

′

″

(Out 0.10

)

Nominal

In 0

′

″

(In 0.23

)

Maximum

In 0

′

″

(In 0.56

)

Item

Standard

NISMO

NISMO RS

Tire Size

17 inch

18 inch

Camber
Degree minute (Decimal degree)

Minimum

–0

′

(–0.75

)

–0

′

(–0.68

)

Nominal

′

(0.00

)

′

(0.07

)

Maximum

′

(0.75

)

′

(0.81

)

Toe-in

Total toe-in
Distance

Minimum

In 1.0 mm (In 0.04 in)

Nominal

In 3.0 mm (In 0.12 in)

Maximum

In 5.0 mm (In 0.20 in)

Total toe-angle
Degree minute (Decimal degree)

Minimum

In 0

′

″

(In 0.10

)

In 0

′

″

(In 0.18

)

Nominal

In 0

′

″

(In 0.27

)

In 0

′

″

(In 0.35

)

Maximum

In 0

′

″

(In 0.43

)

In 0

′

″

(In 0.52

)

Item

Standard

NISMO

NISMO RS

Tire Size

17 inch

18 inch

Camber
Degree minute (Decimal degree)

Minimum

–0

′

(–0.71

)

Nominal

′

(0.03

)

Maximum

′

(0.78

)

Toe-in

Total toe-in
Distance

Minimum

In 1.0 mm (In 0.04 in)

Nominal

In 3.0 mm (In 0.12 in)

Maximum

In 5.0 mm (In 0.20 in)

Total toe-angle
Degree minute (Decimal degree)

Minimum

In 0

′

″

(In 0.08

)

In 0

′

″

(In 0.12

)

Nominal

In 0

′

″

(In 0.25

)

In 0

′

″

(In 0.28

)

Maximum

In 0

′

″

(In 0.42

)

In 0

′

″

(In 0.45

)

2016

QUICK REFERENCE CHART JUKE

BRAKE PEDAL

Unit: mm (in)

FRONT DISC BRAKE

EXCEPT NISMO RS

Unit: mm (in)

NISMO RS

Unit: mm (in)

REAR DISC BRAKE

EXCEPT NISMO RS

Unit: mm (in)

NISMO RS

Unit: mm (in)

Brake pedal height

160.4 - 170.4 (6.31 - 6.71)

Depressed brake pedal height
[Depressing 490 N (50 kg, 110 lb) while turning the engine ON]

70.0 (2.756) or more

Brake pad

Wear limit thickness

2.0 (0.079)

Disc rotor

Wear limit thickness

24.0 (0.945)

Brake pad

Wear limit thickness

2.0 (0.079)

Disc rotor

Wear limit thickness

26.0 (1.024)

Brake pad

Wear limit thickness

2.0 (0.079)

Disc rotor

Wear limit thickness

8.0 (0.315)

Brake pad

Wear limit thickness

2.0 (0.079)

Disc rotor

Wear limit thickness

14.0 (0.551)

2016

QUICK REFERENCE CHART JUKE

REFILL CAPACITIES

UNIT

Liter

US measure

Fuel tank

2WD models

50.0

13-1/4 gal

AWD models

45.0

11-7/8 gal

Engine Coolant (With
reservoir tank) at MAX
level

For NISMO RS models

CVT

8.1

8-1/2 qt

M/T

7.9

8-3/8 qt

Except for NISMO RS
models

CVT

8.7

9-2/8 qt

M/T

8.5

9 qt

Engine oil

Drain
and refill

With oil filter
change

For NISMO RS models

4.5

4-6/8 qt

Except for NISMO RS
models

4.3

4-4/8 qt

Without oil
filter change

For NISMO RS models

4.3

4-4/8 qt

Except for NISMO RS
models

4.1

4-3/8 qt

Dry engine (Overhaul)

For NISMO RS models

5.4

5-6/8 qt

Except for NISMO RS
models

5.2

5-4/8 qt

Transaxle

CVT

RE0F10B

8.6

9-1/8 qt

RE0F10D

7.9

8-3/8 qt

M/T

RS6F94R

2.0

4-1/4 pt

RS6F52H

1.9

4 pt

Transfer

0.37

3/4 pt

Final drive

0.4

7/8 pt

Air conditioning system

Compressor oil

0.12

4.1 fl oz

Refrigerant

0.40 kg

0.9 lb

2016

GI-1

GENERAL INFORMATION

SECTION

CONTENTS

GENERAL INFORMATION

HOW TO USE THIS MANUAL ......................

HOW TO USE THIS MANUAL ............................

Description ................................................................

Terms ........................................................................

Units ..........................................................................

Contents ....................................................................

Relation between Illustrations and Descriptions .......

Components ..............................................................

HOW TO FOLLOW TROUBLE DIAGNOSES .....

Description ................................................................

How to Follow Test Groups in Trouble Diagnosis ......

Key to Symbols Signifying Measurements or Pro-
cedures .....................................................................

HOW TO READ WIRING DIAGRAMS ................

Connector Symbols ...................................................

Sample/Wiring Diagram -Example- .........................

Connector Information .............................................

ABBREVIATIONS ..............................................

Abbreviation List ......................................................

TIGHTENING TORQUE OF STANDARD
BOLTS ................................................................

Description ..............................................................

Tightening Torque Table (New Standard Includ-
ed) ...........................................................................

PRECAUTION ..............................................

PRECAUTIONS ..................................................

Description ..............................................................

Precaution for Supplemental Restraint System
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN-
SIONER" .................................................................

Precaution for Procedure without Cowl Top Cover

....

Precautions For Xenon Headlamp Service .............

Precautions for Removing Battery Terminal ............

General Precautions ................................................

Three Way Catalyst .................................................

Multiport Fuel Injection System or Engine Control
System .....................................................................

Precaution for Turbocharger ....................................

Hoses ......................................................................

Engine Oils ..............................................................

Air Conditioning .......................................................

Fuel ..........................................................................

LIFTING POINT .................................................

Commercial Service Tools .......................................

Garage Jack and Safety Stand and 2-Pole Lift .......

Board-On Lift ...........................................................

TOW TRUCK TOWING .....................................

Tow Truck Towing ...................................................

Vehicle Recovery (Freeing a Stuck Vehicle) ...........

VEHICLE INFORMATION ...........................

IDENTIFICATION INFORMATION ....................

Model Variation ........................................................

Information About Identification or Model Code ......

Dimensions ..............................................................

Wheels & Tires ........................................................

BASIC INSPECTION ...................................

SERVICE INFORMATION FOR ELECTRICAL
INCIDENT ..........................................................

Work Flow ................................................................

Control Units and Electrical Parts ............................

How to Check Terminal ...........................................

Intermittent Incident .................................................

Circuit Inspection .....................................................

CONSULT/GST CHECKING SYSTEM .............

Description ...............................................................

CONSULT Function and System Application*1 .......

Revision: November 2015

2016 JUKE

GI-2

CONSULT/GST Data Link Connector (DLC) Cir-
cuit ..........................................................................

Wiring Diagram - CONSULT/GST CHECKING
SYSTEM - ...............................................................

INSPECTION AND ADJUSTMENT ...................

ADDITIONAL SERVICE WHEN REMOVING BAT-
TERY NEGATIVE TERMINAL ..................................

ADDITIONAL SERVICE WHEN REMOVING
BATTERY NEGATIVE TERMINAL : Required
Procedure After Battery Disconnection ...................

Revision: November 2015

2016 JUKE

Content .. 401 402 403 404 ..