Nissan Juke (2016 year). Service Repair Manual - part 114

 

  Index      Manuals     Nissan Juke (2016 year) - Service and Repair Manual

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

Content      ..     112      113      114      115     ..

 

 

Nissan Juke (2016 year). Service Repair Manual - part 114

 

 

DLK-94

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

DOOR DOES NOT LOCK/UNLOCK WITH DOOR REQUEST SWITCH

DRIVER SIDE DOOR REQUEST SWITCH : Description

INFOID:0000000012196671

All doors do not lock/unlock using driver side door request switch.

DRIVER SIDE DOOR REQUEST SWITCH : Diagnosis Procedure

INFOID:0000000012196672

1.

CHECK DRIVER SIDE DOOR REQUEST SWITCH

Check driver side door request switch.

Refer to 

DLK-75, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK OUTSIDE KEY ANTENNA

Check outside key antenna (driver side).

Refer to 

DLK-55, "DTC Logic"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

REPLACE BCM

1. Replace BCM. Refer to 

BCS-94, "Removal and Installation"

.

2. Confirm the operation after replacement.
Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-45, "Intermittent Incident"

.

PASSENGER SIDE DOOR REQUEST SWITCH
PASSENGER SIDE DOOR REQUEST SWITCH : Description

INFOID:0000000012196673

All doors do not lock/unlock using passenger side door request switch.

PASSENGER SIDE DOOR REQUEST SWITCH : Diagnosis Procedure

INFOID:0000000012196674

1.

CHECK PASSENGER SIDE DOOR REQUEST SWITCH

Check passenger side door request switch.

Refer to 

DLK-75, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK OUTSIDE KEY ANTENNA

Check outside key antenna (passenger side).

Refer to 

DLK-53, "DTC Logic"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

REPLACE BCM

1. Replace BCM. Refer to 

BCS-94, "Removal and Installation"

.

2. Confirm the operation after replacement.
Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-45, "Intermittent Incident"

.

BACK DOOR REQUEST SWITCH

Revision: November 2015

2016 JUKE

DOOR DOES NOT LOCK/UNLOCK WITH DOOR REQUEST SWITCH

DLK-95

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

BACK DOOR REQUEST SWITCH : Description

INFOID:0000000012196675

All doors do not lock/unlock using back door request switch.

BACK DOOR REQUEST SWITCH : Diagnosis Procedure

INFOID:0000000012196676

1.

CHECK BACK DOOR REQUEST SWITCH

Check back door request switch.

Refer to 

DLK-63, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK OUTSIDE KEY ANTENNA

Check outside key antenna (rear bumper).

Refer to 

DLK-57, "DTC Logic"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

REPLACE BCM

1. Replace BCM. Refer to 

BCS-94, "Removal and Installation"

.

2. Confirm the operation after replacement.
Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-45, "Intermittent Incident"

.

Revision: November 2015

2016 JUKE

DLK-96

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

DOOR DOES NOT LOCK/UNLOCK WITH DOOR KEY CYLINDER OPERATION

DOOR DOES NOT LOCK/UNLOCK WITH DOOR KEY CYLINDER OPERA-
TION

Diagnosis Procedure

INFOID:0000000012196677

1.

CHECK POWER DOOR LOCK OPERATION

Check power door lock operation.
Does door lock/unlock with door lock and unlock switch?

YES

>> GO TO 2.

NO

>> Refer to 

DLK-73, "Component Function Check"

.

2.

CHECK DOOR KEY CYLINDER SWITCH

Check door key cylinder switch.

Refer to 

DLK-66, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

REPLACE BCM

1. Replace BCM. Refer to 

BCS-94, "Removal and Installation"

.

2. Confirm the operation after replacement.
Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-45, "Intermittent Incident"

.

Revision: November 2015

2016 JUKE

DOOR DOES NOT LOCK/UNLOCK WITH INTELLIGENT KEY

DLK-97

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

DOOR DOES NOT LOCK/UNLOCK WITH INTELLIGENT KEY

Diagnosis Procedure

INFOID:0000000012196678

1.

CHECK INTELLIGENT KEY

For Intelligent Key that cannot be used for door lock and unlock, check that the Intelligent Key belongs to the

vehicle to be checked.
Does the Intelligent Key belong to the vehicle to checked?

YES

>> GO TO 2.

NO

>> Check Intelligent Key button operation with registered Intelligent Key belonging to the vehicle.

2.

CHECK INTELLIGENT KEY LOW BATTERY WARNING

Check that the Intelligent Key low battery warning is operated.
Is the Intelligent Key low battery warning operated?

YES

>> GO TO 6.

NO-1 >> With another registered Intelligent Key: GO TO 3.

NO-2 >> Without another registered Intelligent Key: GO TO 4.

3.

CHECK INTELLIGENT KEY BUTTON OPERATION

Check that door lock and unlock can be performed by operating the buttons of another registered Intelligent

Key.
Can door lock and unlock be performed with another registered Intelligent Key?

YES

>> GO TO 4.

NO

>> GO TO 7.

4.

CHECK ENGINE START

While depressing the brake pedal, contact the backside of the Intelligent Key that cannot be used to perform

door lock and unlock operation to the push-button ignition switch. Operate the push-button ignition switch, and

check that the vehicle is in START status.
Is the vehicle in START status?

YES

>> GO TO 6.

NO

>> GO TO 5.

5.

CHECK INTELLIGENT KEY

Check the inside of the Intelligent Key for rust or corrosion by water. Simultaneously check the internal circuits

for damage.
Is the vehicle in START status?

YES

>> GO TO 6.

NO

>> Replace Intelligent Key.

6.

CHECK INTELLIGENT KEY BATTERY

Check the Intelligent Key battery.

Refer to 

DLK-81, "Component Inspection"

.

Is the inspection result normal?

YES

>> GO TO 7.

NO

>> Replace Intelligent Key battery.

7.

CHECK POWER DOOR LOCK OPERATION

Check door lock/unlock using door lock and unlock switch.
Does door lock/unlock using door lock and unlock switch?

YES

>> GO TO 8.

NO

>> Refer to 

DLK-90, "ALL DOOR : Diagnosis Procedure"

.

8.

CHECK REMOTE KEYLESS ENTRY RECEIVER

Check remote keyless entry receiver.

Refer to 

DLK-85, "Component Function Check"

.

Revision: November 2015

2016 JUKE

DLK-98

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

DOOR DOES NOT LOCK/UNLOCK WITH INTELLIGENT KEY

Is the inspection result normal?

YES

>> GO TO 9.

NO

>> Repair or replace the malfunctioning parts.

9.

CHECK DOOR SWITCH

Check door switch.

Refer to 

DLK-77, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 10.

NO

>> Repair or replace the malfunctioning parts.

10.

REPLACE INTELLIGENT KEY

1. Replace Intelligent Key.

2. Confirm the operation after replacement.
Is the result normal?

YES

>> INSPECTION END

NO

>> Replace BCM. Refer to 

BCS-94, "Removal and Installation"

.

Revision: November 2015

2016 JUKE

IGNITION POSITION WARNING FUNCTION DOES NOT OPERATE

DLK-99

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

IGNITION POSITION WARNING FUNCTION DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000012196679

1.

CHECK DTC WITH BCM

Check that DTC is not detected with BCM.
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Refer to 

BCS-62, "DTC Index"

.

2.

CHECK POWER DOOR LOCK OPERATION

Check power door lock operation.
Does door lock/unlock with driver side door lock knob and door key cylinder?

YES

>> GO TO 3.

NO

>> Refer to 

DLK-11, "System Description"

.

3.

CHECK DOOR SWITCH

Check door switch.

Refer to 

DLK-77, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

REPLACE BCM

1. Replace BCM. Refer to 

BCS-94, "Removal and Installation"

.

2. Confirm the operation after replacement.
Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-45, "Intermittent Incident"

.

Revision: November 2015

2016 JUKE

DLK-100

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

SELECTIVE UNLOCK FUNCTION DOES NOT OPERATE

SELECTIVE UNLOCK FUNCTION DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000012196680

1.

CHECK “DOOR LOCK–UNLOCK SET” SETTING IN “WORK SUPPORT”

1. Select “DOOR LOCK” of “BCM” using CONSULT.

2. Select “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT” mode.

3. Check “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT”

Refer to 

DLK-26, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)"

.

Is the inspection result normal?

YES

>> GO TO 2

NO

>> Set “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT”.

2.

REPLACE BCM

1. Replace BCM. Refer to 

BCS-94, "Removal and Installation"

.

2. Confirm the operation after replacement.
Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-45, "Intermittent Incident"

.

Revision: November 2015

2016 JUKE

BACK DOOR DOES NOT OPENED

DLK-101

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

BACK DOOR DOES NOT OPENED

Diagnosis Procedure

INFOID:0000000012196681

1.

CHECK BACK DOOR OPENER SWITCH

Check back door opener switch.

Refer to 

DLK-59, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK BACK DOOR OPENER ACTUATOR

Check back door opener actuator.

Refer to 

DLK-59, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK VEHICLE SPEED SIGNAL

Check vehicle speed signal.

Refer to 

MWI-33, "DTC Index"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

REPLACE BCM

1. Replace BCM. Refer to 

BCS-94, "Removal and Installation"

.

2. Confirm the operation after replacement.
Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-45, "Intermittent Incident"

.

Revision: November 2015

2016 JUKE

 

 

 

 

 

 

 

Content      ..     112      113      114      115     ..